[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Axis 2490 Serial Server

The first batches of 2490 shipped is equipped with ETRAX100, 
not ETRAX100LX, so in that case you could use the 
devboard release (not devboard_lx) and build static linked 
programs and put them in /etc/ using ftp.
Of course doing so is nothing we support officially and
might void your warranty, but if you're brave read on..

If you corrupt the firmware or configuration in the flashmemory 
beyond repair by doing a factory default it's possible
to network boot it using boot_elinux, but the button to activate
that is not mounted on 2490 so you would have to shortcut the pins
instead - see pinout.txt on http://developer.axis.com

Best regards

----- Original Message ----- 
From: "Ulises Ortiz" <uortiz@xxxxxxx.mx>
To: <dev-etrax@xxxxxxx.com>
Sent: den 6 februari 2002 23:37
Subject: Axis 2490 Serial Server

> Hi
> I have got an axis 2490 serial server.
> I want to know if I can program it like the etrax lx100 dev board.
> Thanks.
> Ulises