[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Interrupt on parallel port in manual mode?



Mikael Starvik wrote:
> 
> Hi,
> 
> The ETRAX 100LX also has a synchronous serial port
> which is more suitable for SPI. In fact it can handle
> SPI entirely in hardware. The existing synchronous
> serial port is not really tested for SPI but I know
> of at least a couple of customers who runs SPI with
> some modifications of the driver.

Ok... We will probably choose this route instead.
Thanks. 


> I'm not sure that you can get an peri interrupt in
> manual mode (I can look it up). Otherwise you can
> connect it to a pin on general port A or to the
> IRQ pin.
>

The "manual" isn't really clear about this (in our opinion).

Regards,
-- 
Anders Hasselqvist
hassel@xxxxxxx.se
http://good-deed.dhs.org/
Tel   :(+46) 90 195643
Mobile:(+46) 70 5952539
Fax   :(+46) 90 2035269