[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: Problem with boot the Axis Developer Board



Looks like there's a problem with the JFFS-partition on your board. Try doing a factorydefault by keeping the testbutton (any of the buttons between the RS-232 connectors) pressed while booting (watch the output on the serial port and send it to this mailing list of it doesn't work).

Best regards
/Jonas


-----Original Message-----
From: Karel Šín
To: dev-etrax@xxxxxxx.com
Sent: 2002-05-10 11:54
Subject: Problem with boot the Axis Developer Board

Hello,
 I have baught the Axis Developer Board LX. When I connect the board to
the
HUB and switch on the power, the status LED on the HUB shows no
activity.
The yellow LED on the board doesn't blink. When I connect the board
using
serial port, the terminal shows messages shown bellow and comunication
is
stopped. What do I have to do?

   Thanks in advance
 Karel


Uncompressing Linux...
Done. Now booting the kernel.
Linux version 2.4.5 (jonashg@xxxxxxx.96 20000427
(experimental)) #1 Fri Sep 14 16:19:45 CEST 2001
Setting up paging and the MMU.
On node 0 totalpages: 1024
zone(0): 1024 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Linux/CRIS port on ETRAX 100LX (c) 2001 Axis Communications AB
Kernel command line:
ds1302: RTC found.
ds1302: SDA, SCL, RST on PB0, PB1, PB2
rtc_time : 00:00:80
rtc_date : 2000-01-01
rtc: sec 0x80 min 0x0 hour 0x0 day 0x1 mon 0x1 year 0x0
Enabling watchdog...
Calibrating delay loop... 33.17 BogoMIPS
Memory: 6912k/8192k available (824k kernel code, 1280k reserved, 41k
data,
24k init)
kmem_create: Forcing size word alignment - vm_area_struct
kmem_create: Forcing size word alignment - filp
Dentry-cache hash table entries: 1024 (order: 0, 8192 bytes)
Inode-cache hash table entries: 1024 (order: 0, 8192 bytes)
kmem_create: Forcing size word alignment - inode_cache
kmem_create: Forcing size word alignment - bdev_cache
kmem_create: Forcing size word alignment - cdev_cache
Buffer-cache hash table entries: 2048 (order: 0, 8192 bytes)
Page-cache hash table entries: 2048 (order: 0, 8192 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
kmem_create: Forcing size word alignment - sock
Starting kswapd v1.8
kmem_create: Forcing size word alignment - file lock cache
JFFS version 1.0, (C) 1999, 2000  Axis Communications AB
early initialization of device eth0 is deferred
ETRAX 100LX serial-driver $Revision: 1.13 $, (c) 2000 Axis
Communications AB
ttyS0 at 0xb0000060 is a builtin UART with DMA
ttyS1 at 0xb0000068 is a builtin UART with DMA
ttyS2 at 0xb0000070 is a builtin UART with DMA
ttyS3 at 0xb0000078 is a builtin UART with DMA
Axis flash mapping: 8000000 at 50000000
Axis flash: Found 1 x16 CFI device at 0x0 in 16 bit mode
 Amd/Fujitsu Extended Query Table v1.0 at 0x0040
Axis flash: JEDEC Device ID is 0xC4. Assuming broken CFI table.
Axis flash: Swapping erase regions for broken CFI table.
number of CFI chips: 1
 Found valid partition table at 0x5001000A-0x50010056.
  /dev/flash1 at 0x10000, size 0x1a0000
  /dev/flash2 at 0x1b0000, size 0x50000
I2C driver v2.2, (c) 1999-2001 Axis Communications AB
EEPROM char device v0.3, (c) 2000 Axis Communications AB
eeprom: Assuming i2c compatible 2kB eeprom.
ETRAX 100LX GPIO driver v2.1, (c) 2001 Axis Communications AB
kmem_create: Forcing size word alignment - blkdev_requests
block: queued sectors max/low 4458kB/1486kB, 64 slots per queue
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
ETRAX 100LX 10/100MBit ethernet v2.0 (c) 2000-2001 Axis Communications
AB
eth0 initialized
eth0: changed MAC to 00:40:8C:CD:00:00
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
kmem_create: Forcing size word alignment - ip_dst_cache
IP: routing cache hash table of 1024 buckets, 8Kbytes
TCP: Hash tables configured (established 1024 bind 1024)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
VFS: Mounted root (cramfs filesystem) readonly.
Freeing unused kernel memory: 24k freed
init: starting up.
Mounting proc on /proc
Mounting /dev/flash2 on /mnt/flash
Cannot find /etc/release
[ issue FAILED ]
Mounting tmpfs on /var
Initializing /var
/usr/rc.d/S35network: cannot create /etc/network/mac.conf: directory
nonexistent
.: Can't open /etc/network/network.conf
[ network FAILED ]
.: Can't open /etc/network/network.conf
[ dhclient FAILED ]
open() of inittab: No such file or directoryKernel panic: Attempted to
kill
init!