[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: RE: how i add an usb conenctor ?
Any idea when this so-needed USB host driver will be ready (a more accurate date different than "ASAP") ? Seems I've been struggling because of an incomplete implementation of this driver...
> You need to enable USB Host Port 2 under "Drivers for ETRAX 100LX built-in interfaces"
> when you configure the kernel. Please note that the ETRAX 100LX USB host driver is not fully
> implemented (isochronous traffic is not yet supported in the driver for instance). We are right
> now improving the host driver and it will be released as soon as possible.
> I would also like to make it clear that the ETRAX 100LX USB controller supports all four traffic
> types both in host and device mode.
> Earlier versions of ETRAX 100LX had a couple of USB related bugs but these are no longer present.
> -----Original Message-----
> From: Michaela Bone [mailto:email@example.com]
> Sent: den 16 april 2002 09:54
> To: Magnus Mårtensson
> Subject: Re: how i add an usb conenctor ?
> thanks i have seen bunt how i have (with wich new options regarding usb) to
> compile the new kernel ?
> ----- Original Message -----
> From: "Magnus Mårtensson" <firstname.lastname@example.org>
> To: "'Michaela Bone'" <email@example.com>
> Sent: Monday, April 15, 2002 5:06 PM
> Subject: RE: how i add an usb conenctor ?
> > Hi Michaela.
> > Please have a look at
> > http://developer.axis.com/doc/hardware/devboard_lx/USB_Devboard_LX.pdf
> > for instructions.
> > Regards
> > /Magnus
> > -----Original Message-----
> > From: Michaela Bone [mailto:firstname.lastname@example.org]
> > Sent: den 15 april 2002 17:03
> > To: email@example.com
> > Subject: how i add an usb conenctor ?
> > hi
> > i have the developer lx board...
> > how i add an usb connector ?
> > thx
Get your own free email account from