[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: RE: how i add an usb conenctor ?



Dear Oscar,
according to our time schedule the driver will be ready in mid July. Will this be
good enough for your project or do you which to receive pre-release versions of the driver
to test?

Regards
/Magnus

> -----Original Message-----
> From: ogueta@xxxxxxx.com">mailto:ogueta@xxxxxxx.com]
> Sent: den 15 maj 2002 04:33
> To: magnusmn@xxxxxxx.com
> Cc: dev-etrax@xxxxxxx.com
> Subject: Re: RE: how i add an usb conenctor ?
> 
> 
> Magnus, 
> 
>    Any idea when this so-needed USB host driver will be ready 
> (a more accurate date different than "ASAP") ? Seems I've 
> been struggling because of an incomplete implementation of 
> this driver...
> 
> Thanks.
> Oscar.
> 
> > Michaela.
> > You need to enable USB Host Port 2 under "Drivers for ETRAX 
> 100LX built-in interfaces"
> > when you configure the kernel. Please note that the ETRAX 
> 100LX USB host driver is not fully
> > implemented (isochronous traffic is not yet supported in 
> the driver for instance). We are right 
> > now improving the host driver and it will be released as 
> soon as possible. 
> > 
> > I would also like to make it clear that the ETRAX 100LX USB 
> controller supports all four traffic 
> > types both in host and device mode.
> > Earlier versions of ETRAX 100LX had a couple of USB related 
> bugs but these are no longer present.
> > 
> > Regards
> > /Magnus  
> > 
> > -----Original Message-----
> > From: Michaela Bone [mailto:blutus@xxxxxxx.net]
> > Sent: den 16 april 2002 09:54
> > To: Magnus Mårtensson
> > Subject: Re: how i add an usb conenctor ?
> > 
> > 
> > thanks i have seen bunt how i have (with wich new options 
> regarding usb) to
> > compile the new kernel ?
> > 
> > 
> > ----- Original Message -----
> > From: "Magnus Mårtensson" <magnus.martensson@xxxxxxx.com>
> > To: "'Michaela Bone'" <blutus@xxxxxxx.net>; "dev-etrax" 
> <dev-etrax@xxxxxxx.com>
> > Sent: Monday, April 15, 2002 5:06 PM
> > Subject: RE: how i add an usb conenctor ?
> > 
> > 
> > > Hi Michaela.
> > >
> > > Please have a look at
> > > 
http://developer.axis.com/doc/hardware/devboard_lx/USB_Devboard_LX.pdf
> <http://developer.axis.com/doc/hardware/devboard_lx/USB_Devboard_LX.pdf>
> > for instructions.
> >
> > Regards
> > /Magnus
> >
> > -----Original Message-----
> > From: Michaela Bone [mailto:blutus@xxxxxxx.net]
> > Sent: den 15 april 2002 17:03
> > To: dev-etrax@xxxxxxx.com
> > Subject: how i add an usb conenctor ?
> >
> >
> > hi
> >
> > i have the developer lx board...
> > how i add an usb connector ?
> >
> > thx
> >
> 
> 

....................................
Get your own free email account from
http://www.popmail.com