[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: Problems booting own linux kernel 2.4.19



Usually this is caused by an incorrect memory configuration.
Are you still running on the developer board 100LX-IDE?
You can run boot_linux -F -p and send the printout
to us for verification. Do you run the onboard RAM
or do you have any additional module?

-----Original Message-----
From: owner-dev-etrax@xxxxxxx.com]On">mailto:owner-dev-etrax@xxxxxxx.com]On
Behalf Of Ortega, Artur
Sent: Wednesday, September 18, 2002 1:52 PM
To: dev-etrax
Subject: Problems booting own linux kernel 2.4.19


Hi,

what could be the reason, that my boards stops before uncompressing the
linux-kernel:
<snip>
JUMP
0x00000000
</snip>

instead of:
<snip>
JUMP
0x00000000
Uncompressing Linux...
</snip>

Thanks,

Artur