[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: Problems booting own linux kernel 2.4.19



Hi Mikael,

yes, I am still trying to boot the sp_lx_ide. With the fimage from Magnus
the board works fine. But I can't produce my own working fimage. :-(
*shame*

I only use the on board ram. Perhaps I should disable SDRAM in the
kernel... I neither use the IDE modules...

For further information I send you the boot_elinux results and an
additional boot-log.

Thanks a lot

Artur


 On Wed, 18 Sep 2002, Mikael Starvik wrote:
>Usually this is caused by an incorrect memory configuration.
>Are you still running on the developer board 100LX-IDE?
>You can run boot_linux -F -p and send the printout
>to us for verification. Do you run the onboard RAM
>or do you have any additional module?
Command:
etrax100boot --setreg b0000000 000095f8 --setreg b0000004 00000104 --setreg b000000c 09e05757 --setreg b0000008 8000C002 --pause 20000 --setreg b0000008 8000c602 --setreg b0000008 8000c002 --setreg b0000008 8000c402 --setreg b0000008 8000c002 --setreg b0000008 8000c402 --setreg b0000008 8000c002 --setreg b0000008 8000c402 --setreg b0000008 8000c002 --setreg b0000008 8000c402 --setreg b0000008 8000c002 --setreg b0000008 8000c402 --setreg b0000008 8000c002 --setreg b0000008 8000c402 --setreg b0000008 8000c002 --setreg b0000008 8000c402 --setreg b0000008 8000c002 --setreg b0000008 8000c402 --setreg b0000008 8000c002 --setreg b0000008 8060c202 --setreg b0000008 8000c002 --setreg b0000008 80008002 --setreg b0000030 0000d000 --setreg b0000038 0000ff00 --bootfile DBG0 --file fimage c0004000 --flash c0004000 0 400000 --jump 0
Sniffing /dev/ttyS1 at 115200 Baud





Serial interface initialized.





Device ID = 0x00001A2A

This bootloader hacked by axisgnu Fre Dez 14 16:09:58 CET 2001.

Checksum of bootloader is 0x000A3A22

Waiting for load info.

Checksum of file is 0x00001C43

Got load info.

SET_REGISTER

0xB0000030

0xFFFFD000

SET_REGISTER

0xB0000000

0x00B3C5B5

SET_REGISTER

0xB0000004

0x00000206

SET_REGISTER

0xB000000C

0x09E05757

SET_REGISTER

0xB0000008

0x80008002

PAUSE_LOOP

0x00020000

SET_REGISTER

0xB0000008

0x8000C602

SET_REGISTER

0xB0000008

0x8000C002

SET_REGISTER

0xB0000008

0x8000C402

SET_REGISTER

0xB0000008

0x8000C002

PAUSE_LOOP

0x00020000

SET_REGISTER

0xB0000008

0x8060C202

SET_REGISTER

0xB0000008

0x8000C002

SET_REGISTER

0xB0000008

0x80008002

PACKET_INFO

0xC0004000

0x00400018

Checksum of file is 0x32E868F5

FLASH

0xC0004000

0x00000000

0x00400000

CFI dev 0x80000000

CFI dev 0x84000000

0x80000000: Erasing 0x00200000 bytes...done, verifying...OK
0x80000000: Writing 0x00200000 bytes...verified
0x84000000: Erasing 0x00200000 bytes...done, verifying...OK
0x84000000: Writing 0x00200000 bytes...verified
JUMP

0x00000000