[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
RE: boot loader not working after reboot host - more info
> No hub.
Check if there's a link LED on your network card.
> -----Original Message-----
> From: firstname.lastname@example.org]On">mailto:email@example.com]On
> Behalf Of Jonas Holmberg
> Sent: Monday, November 25, 2002 4:03 AM
> To: 'Mikael Starvik'; 'Dave Rovner'
> Cc: dev-etrax
> Subject: RE: boot loader not working after reboot host - more info
> > 1. How is your card connected to your PC? Crossed cable, hub
> > or switch? I recommend a hub.
> And if the link LED on the hub doesn't light up when you set
> the board in network boot mode, you've got a hardware problem
> (on either side).
> > 4. bootblocktool -w SERNO ethernetaddress
> That is ethernetaddress *without* colons (e.g 00408C123456).