[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]


Hi Steve.
We have made a design that has a 8 MB module externally so that the SDRAM bus accesses are 32 bit wide.
We use 22R on the data bus and the SDRAM clock and it works fine.
-----Original Message-----
From: Steve Jones [mailto:sjones@xxxxxxx.uk]
Sent: den 28 november 2002 18:29
To: dev-etrax@xxxxxxx.com
Subject: SDRAM

When adding external SDRAM to the MCM chip do any of the signals require inline resistors, if so which ones and what values are required/recommended.