[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: [dev-bluetooth] AXIS 9010 Flashing



> -----Original Message-----
> From: Bertrand Payet [mailto:payet_b@xxxxxxx.com] 
> Sent: Monday, January 27, 2003 21:11
> To: dev-etrax@xxxxxxx.com
> Subject: RE: [dev-bluetooth] AXIS 9010 Flashing
> 
> > > I'd like to add an new software to the AXIS 9010.
> >
> >What are you trying to install into the AXIS 9010?
> >A Devboard BT firmware?
> 
> I have developed a client/server application on the 
> devboard_bt. To put this application into the devboard_bt,
> I have had to build a new fimage. Now I'd like to add this
> application into the AXIS 9010. Is it possible to build a 
> new fimage adapted for the AXIS 9010?

If the application is not too big (100-150kB) when linked
statically, then you could put it in /etc and run it from there.
That way you would not have to replace the AXIS 9010 firmware.

If that is not possible, then you have two options: either
build your own product based on the devboard_bt, or make a
business case with us to modify the AXIS 9010 for you.

> >What does the following
> >command produce when used on your fimage?
> >
> >od -A x -t x1 -j 0x10000 -N 0x60 fimage
> 
> 010000 0f 05 25 f0 ed ff 58 00 0f 05 ef be 44 00 35 07
> 010010 00 00 00 00 00 00 00 00 1a 00 01 9f 72 0d 02 00
> 010020 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 010030 00 00 00 00 1a 00 00 00 05 00 55 ea 98 04 03 00
> 010040 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 010050 00 00 ff ff ff ff 00 00 00 00 00 00 00 00 00 00
> 010060

This decodes into the following partition table (the rescue
partition is not actually stored in it):

flash1 0x1a0000 rw          kernel    flash1.img
flash2 0x050000 ro          jffs      flash2.img

Note the ro/rw flags. They seem to have been exchanged.
Are you sure you are using the partition table you included
in your previous mail, or did you copy it by hand and
accidentally corrected the flags when you did?

> Best Regards
> 
> Bertrand.

//Peter