[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

FW: SDRAM config

-----Original Message-----
From: Mikael Starvik 
Sent: Wednesday, January 29, 2003 11:21 AM
To: 'Alex Raimondi'
Subject: RE: SDRAM config

>hmmm... set this value to 0x80409040 in kernel config. but the last -setreg
>b0000008 sets it to 0x80009040.
>Do I have a problem?

No, that's ok. The missing 0x40 is used earlier in the sequence and does
not matter for the last b0000008 command.

-----Original Message-----
From: owner-dev-etrax@xxxxxxx.com]On">mailto:owner-dev-etrax@xxxxxxx.com]On
Behalf Of Alex Raimondi
Sent: Wednesday, January 29, 2003 11:17 AM
To: Mikael Starvik; dev-etrax
Subject: Re: SDRAM config

> This is a bad value. The configuration for group0 and group1 should
> always be identical to be on the safe side. Use tool available at
> http://developer.axis.com/doc/hardware/etrax100lx/sdram_config/
> to calculate your config.

great. nice to know

> How did you remake the kernel?
> Something like this should do it (from the top directory):
> make kernel && make images

I didn't do make images. But now it's done.

> >Why are there so many -setreg b0000008 ? I would like to have b0000008
> >to 80409040.
> All the b0000008 are used to initialize the SDRAMs. All these values
> are automatically generated from the value you enter. The last value
> should be the same as you enterred.

hmmm... set this value to 0x80409040 in kernel config. but the last -setreg
b0000008 sets it to 0x80009040.
Do I have a problem?