[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: Change init sequence of driver modules



Try to put your driver after the other drivers in
os/linux/arch/cris/drivers/Makefile (at least after i2c.o). This helped me.

Sza2.

Problems with Windows - Reboot.
Problems with Linux       - Be root.


> -----Original Message-----
> From:	Arne Bockholdt [SMTP:abockholdt@xxxxxxx.de]
> Sent:	2003. február 7. 11:43
> To:	dev-etrax@xxxxxxx.com
> Subject:	Change init sequence of driver modules 
> 
> Hi all,
> 
> I'm trying to include a new driver to the Linux kernel for our realtime
> clock, the clock uses the I2C bus to communicate with the CPU.
> Unfortunetly the driver module will always loaded before the I2C driver,
> so the question is how to change the module init sequence ?
> 
> Thanks in advance,
> 
> 	Arne Bockholdt
> 
> Dipl. Inform. Arne Bockholdt
> REA Elektronik GmbH
> Teichwiesenstr. 1
> 64367 Mühltal-Waschenbach
> Tel. +49 (0) 6154 / 638-115, Fax -195
> ABockholdt@xxxxxxx.de


**********************************************************************************************
The information contained in this message or any of its attachments may be confidential and is intended for the exclusive use of the addressee(s). Any disclosure, reproduction, distribution or other dissemination or use of this communication is strictly prohibited without the express permission of the sender. The views expressed in this email are those of the individual and not necessarily those of Sony or Sony affiliated companies. Sony email is for business use only. 

This email and any response may be monitored by Sony United Kingdom Limited.
(05)
**********************************************************************************************