[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: Booting trouble, help me!



Hi.
It seems like something goes wrong with the boot loader (etrax100boot).
Is there any information available from ser2 on the board? 
There is a newer version of etrax100boot available which will provide
you with boot status information over the Ethernet instead of over the serial port.
You can download it from 
http://developer.axis.com/download/tools/tools-build-R2_0_5.tgz

Regards
/Magnus


-----Original Message-----
From: luca.guerrini@xxxxxxx.it
To: Dev-Etrax
Sent: 2/7/2003 12:16 PM
Subject: Booting trouble, help me!

Hello folks,
     i'm a new memberof the mailing list. Ca someone help me
about this problem:

I've made all the installation folowing the instruction, so:
export LANG=C (I've had a problem with this variable set to
another value)
. ./init_env
make install
make images

It seems all it'OK but now starts the problem:

I set the board in boot mode
(only the power led is on)

./ktest
(the status led lights on)

The output on the monitor is:
* size is 2007040 0x001ea000
Using internal boot loader: DBG2 - Debug on ser2.
Starting boot...
Booting device with random id bfbf9363.

Nothing else happens, the status led remains ON.

What's the problem?