[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
RE: devboard_lx don't boot afrer flashing to 2.11
2490 is based on linux 2.0 and your flashit may be expecting
Linux 2.4. Test to use "boot_elinux -f" instead. Also note
that it takes approx 10 seconds for the 2490 to respond to
the first ping.
Behalf Of Alexandre Poltorak
Sent: Thursday, April 10, 2003 11:28 PM
Subject: devboard_lx don't boot afrer flashing to 2.11
Hello i just flushed my devboard_lx with 2.11 firmware.
(./flashit -i ./axis2490.bin)
then i proceed as desribed in the manual for setting an IP address. but
the board does not take the IP and dont responce to ping. arp entry is
auto deleted soon.
i also noticed bootpc packet from the devboard_lx:
23:25:48.415581 18.104.22.168.bootpc > 255.255.255.255.bootps:
xid:0x184a0000 secs:2560 flags:0x8000 [|bootp]
23:25:49.300778 0:90:27:c7:1f:31 > Broadcast sap e0 ui/C
pls could somebody help me to make my devboard bootble? snif snif..