[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: Solder ball U12



Hi,

The 25 MHz clock is stared by setting enable = on and phy = mii_clk in R_NETWORK_GEN_CONFIG.
This is done in e.g. arch/cris/boot/rescue/head.S.

/Mikael

-----Original Message-----
From: owner-dev-etrax@xxxxxxx.com">mailto:owner-dev-etrax@xxxxxxx.com] On Behalf Of Brian Millar
Sent: Wednesday, June 25, 2003 1:04 AM
To: dev-etrax
Subject: Solder ball U12


Does the TXER pin automatically clock out at 25 mhz on system reset, or is cpu setup necessary?

Dan
This e-mail was scanned by RAV Antivirus. (www.ravantivirus.com)