[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: axis 2490 flashing



>I found HWID only in Makefile and at tools/mkprod source "prodspec file  format" description.

Ok, I thought you were using something more up-to-date :-)

>I set HWID=112 inside Makefile, build image, upload new image via ftp to  2490, but after reboot, we have no >network conectivity.  No other places  where setted HWID.  Maybe I miss something?

Network connectivity shouldn't be related to HWID at all.

-----Original Message-----
From: owner-dev-etrax@xxxxxxx.com">mailto:owner-dev-etrax@xxxxxxx.com] On Behalf Of Vladimir Bormotov
Sent: Wednesday, July 09, 2003 2:50 PM
To: dev-etrax
Subject: Re: axis 2490 flashing



		Hi, Mikael!

>>>>> "MS" == Mikael Starvik <mikael.starvik@xxxxxxx.com> writes:

 MS> The HWID is there to prevent you from downloading the wrong firmware.  MS> It would be disastrous to download e.g. camera software in a 2490.  MS> Have you made your own developer board software that you want to  MS> download or are you trying to upgrade with a 2490 firmware?

 own image
 
  
 MS> If you are creating your own firmware you can change the HWID in your  MS> fimage to 112 by editing the configure file (search for HWID)

 I found HWID only in Makefile and at tools/mkprod source "prodspec file  format" description.
 
 
 MS> Note that if you have bought a 2490 and replaces the software with a  MS> developer board software your warranty and support will be void.
 
 of course, we remember this :)
 
 
 MS> Normally you should buy a developer board if you want to create  MS> your own software (but yes, it is the same hardware).

 ehhh...  Normally we always buy Devboard's, but one mistake when human  fill order, and this question as result ;)
 
 Flashing "true devboard image" (with HWID=400) by shorting "buttons" works  with no problems.  After reboot all software works properly. Also, after  this we can restore flash with original 2490 firmware via ftp.
 
 I set HWID=112 inside Makefile, build image, upload new image via ftp to  2490, but after reboot, we have no network conectivity.  No other places  where setted HWID.  Maybe I miss something?
 
-- 
		Bor.