[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: Unable to flash mcm



Hi,
 
Have you tried make clean in tools/build/e100boot?
 
/Mikael

-----Original Message-----
From: owner-dev-etrax@xxxxxxx.com">mailto:owner-dev-etrax@xxxxxxx.com] On Behalf Of keparker@xxxxxxx.com
Sent: Thursday, July 10, 2003 10:23 PM
To: dev-etrax
Subject: Unable to flash mcm



I am unable to load the mcm kernel from my redhat 9 workstation. 

 I can compile application code but cannot load the flash with e100boot.  On looking at the problem I see that 
an error occurs when building the e100boot executable module. 


I think it is because `/usr/lib/gcc-lib/i386-redhat-linux/2.96'  does not exist on my system. On my system I have `/usr/lib/gcc-lib/i386-redhat-linux/3.2.2' instead.


Do I need to do something special because it is Red Hat 9? This worked fine on the redhat 7.2 box I was using before. 


### Making sbl 
make[3]: Entering directory `/home/mgs/axis/e100lx_mcm/tools/build/e100boot/sbl' 
make[3]: *** No rule to make target `/usr/lib/gcc-lib/i386-redhat-linux/2.96/include/stddef.h', needed by `common.o'.  Stop.

make[3]: Leaving directory `/home/mgs/axis/e100lx_mcm/tools/build/e100boot/sbl' 
make[2]: *** [all] Error 2 
make[2]: Leaving directory `/home/mgs/axis/e100lx_mcm/tools/build/e100boot' 
make[1]: *** [install_e100boot] Error 2 
make[1]: Leaving directory `/home/mgs/axis/e100lx_mcm/tools/build' 
make: *** [tools] Error 2