[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: usb flash drives - scsi



Any chance that the files can be sent again?  I think that I missed that 
message (and don't see it in the archive).

Quinton

On Tue, 12 Aug 2003, Akshay Adhikari wrote:

> thanks! the new files work just fine. i still get the 'wrong magic' 
> message, but everything seems to be working fine.
> 
> akshay
> 
> 
> Orjan Friberg wrote:
> 
> > Akshay Adhikari wrote:
> >
> >> thanks for the link. i managed to compile in support. however, when 
> >> mounting the device, it takes a long time, and i get the message 
> >> "cramfs: bad magic".
> >
> >
> > When I've mounted my 128 MB drive, only partially full, the mount 
> > operation has taken in the order of a couple of seconds.  I'm not sure 
> > I've seen the "bad magic" message though.
> >
> >> also, if i "sync" the disk, i get errors like below:
> >>
> >> Jun 10 11:13:45 AxisProduct kernel: Current sd08:01: sns = 70  
> >> 0               Jun 10 11:13:45 AxisProduct kernel: Raw sense 
> >> data:0x70 0x00 0x00 0x00 0x00 0x0
> >> Jun 10 11:13:45 AxisProduct kernel:  I/O error: dev 08:01, sector 
> >> 3            SCSI disk error : host 0 channel 0 id 0 lun 0 return 
> >> code = 8000000        any idea what might be wrong?
> >
> >
> > I haven't seen those SCSI errors in a while (on the other hand, I 
> > haven't tried the sync command).  I have attached the latest USB 
> > driver, which you may want to try.  (Both files should go into the 
> > os/linux/arch/cris/drivers directory; then 'make kernel' and 'make 
> > images'.)
> >
> 
> 
>