[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Serial number SERNO not found at MCM boot




----- Original Message -----
From: "girerd" <girerd@xxxxxxx.fr>
To: <dev-etrax@xxxxxxx.com>
Sent: den 26 augusti 2003 18:53
Subject: Serial number SERNO not found at MCM boot


> Hi,
>
> We have fewer boards with an Etrax MCM. There work well individualy but
> we can't assign them
> different IP  addresses.

Hi,
If you have used boot_linux -F or "flashitall" the SERNO is
erased from the flash, use bootblocktool to set the SERNO
variable in the bootparameter area, e.g.

bootblocktool -a SERNO 00408C123ABC

(the SERNO should be printed on a label of the board if you
bought it from Axis. If you have built your own board and
just bought chips, I don't know if we supply MAC addresses,
contact technology@xxxxxxx.com if you need assistance with that)
Best regards
/Johan




> Here is the messages we receive on the debug port at boot.
>
>
> ----------------------------------------------------------------------
> Axis Developer Board LX release 2.1.0
>
> Mounting tmpfs on /var
> Initializing /var
> Warning: Parameter SERNO not found.
> /usr/rc.d/S35network: Cannot determine serial number, using default MAC
> address.
> Setting up eth0 with ip 134.158.136.23 and mac 00:40:8C:CD:00:00
> eth0: changed MAC to 00:40:8C:CD:00:00
> Setting up lo with ip 127.0.0.1
> Default gateway is 134.158.136.1
> Hostname is "lyoelec3"
> Domainname is "in2p3.fr"
> Nameserver is "134.158.138.50"
> Adding hostname to hosts file
> Jan  1 00:00:04 lyoelec3 syslogd 1.3-3: restart.
> boa: servername set to 134.158.136.23.
> Jan  1 00:00:04 lyoelec3 boa[62]: starting server
>
>
> Axis Developer Board LX release 2.1.0
> Linux 2.4.19 on a cris (console)
>
> lyoelec3 login: Jan  1 00:00:06 lyoelec3 sftpd[60]: sftpd $Revision:
> 1.105 $ starting up
>
> --------------------------------------------------------------------------
---------------------
>
> And a few minutes later we receive the following message (I supppose
> that this is normal,
> because 134.158.136.22 was used  before with the same MAC address)
>
> Jan  1 00:03:33 lyoelec3 ipsetd: IP-set ping, changing to 134.158.136.21.
>
> Thank you for your help ...
>
> Best regards,
>
> Claude
>