[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: Problem with Serial Port
----- Original Message -----
From: "Santiago Cobreces Alvarez" <firstname.lastname@example.org>
Sent: den 2 september 2003 19:19
Subject: Problem with Serial Port
> I'm using DevBoard LX with a 2.4.19 kernel and I'm trying to use
> /dev/ttyS0 but I'm not able to use it.
> When I do:
> $echo "testing" > /dev/ttyS0
> I can't see any line moving with the oscilloscope in COM1. I've tried
> also with "hwtestserial" and some C self-made programs with the same
> negative result.
> I'm in a real hurry and I would appreciate very much any help with this.
> I think the problem is with my kernel config, but I'm not sure. Please
> help me.
Check your kernelconfig and make sure that the PA0 pin is set to 0
(/SERIAL_INIT) to enable serial output or set PA0 to 0 with hwtestserial
or other utility.
Example of working kernelconfig entries: