[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: Problem of debug on a design with MCM
Your are right, now it works perfectly well !!
Thank you ..
Mikael Starvik a écrit:
The file is attached.
From: email@example.com [mailto:firstname.lastname@example.org] On Behalf
Sent: Monday, September 08, 2003 10:07 AM
Subject: Problem of debug on a design with MCM
We have an application which runs correctly on an MCM during about one
hour and then craschs ... The MCM is no longer
accessible through Ethernet. I send you in attachement an extract of
messages printed by sermon on the debug port.
The beginning corresponds to a normal execution.
Call interrupt handler fifoNotEmpty = 0 // in interrupt handler
Clear interrupt //in interrupt
Data received fifoNotEmpty = 1 // in read
function wake up
Reading the interrupt status register : 800c // in read
Number of words in the FIFO CYCLE : 12 // in read
After we see an unexpected message and a <4> printed before each line.
I'am interested to understand the meaning of this number.
Call interrupt handler fifoNotEmpty = 0
handler fifoNotEmpty = 0 <= ??? I don't anderstand this message it
seems to be, the same as the previous one, but truncated
<4>Data received fifoNotEmpty = 1
<4>Reading the interrupt status register : 800c
<4>Number of words in the FIFO CYCLE : 12
Finaly, the messages on the debug port become unreadable and the MCM
crashs, it is no longer
accessible through Ethernet we need a hardware reset to restart the system.
<4>Call interrupt handler fifoNotEmpty = 0
I will try to build a more simple application without interrupt ... but
I'am interested by any idea and advice to debug in this situation