[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: 4MB flash Howto



Be aware that you cannot modify the partition table when 
upgrading using FTP. This can only be done when using 
boot_linux (etrax100boot) to upgrade.

//Peter

> -----Original Message-----
> From: Mikael Starvik [mailto:starvik@xxxxxxx.com] 
> Sent: Monday, September 15, 2003 07:30
> To: ik3huk@xxxxxxx.it; dev-etrax
> Subject: RE: 4MB flash Howto
> 
> The partition sizes are determined by the file ptablespec 
> in the root of the build tree. A ptablespec for 4 MB could
> look something like this
> 
> rescue 0x010000 ro rescue rescue.img
> flash1 0x1f0000 ro kernel flash1.img
> flash2 0x200000 rw jffs   flash2.img
> 
> /Mikael
> 
> -----Original Message-----
> From: owner-dev-etrax@xxxxxxx.com">mailto:owner-dev-etrax@xxxxxxx.com] On
> Behalf Of ik3huk@xxxxxxx.it
> Sent: Saturday, September 13, 2003 1:45 AM
> To: dev-etrax
> Subject: 4MB flash Howto
> 
> Hi everybody,
> I need to store a 500K application in JFFS, i.e., need to 
> update it via FTP from remote.
> I recognized I have a 4MB flash on my board (AMD 29DL323DT) 
> but it seems configured as it was a 2MB. Is there an howto 
> around (or some pointers) to explain me which file I need 
> to modify to have more space on JFFS partition? 
> 
> Thank You,
> Diego.