[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
RE: Sync serial interface as SPI
you very much for your response.
device I am connecting is a MCP2510, this is, a CAN controller from microchip.
I don't know if the MCP2510 can handle a continous clock. I will take a
look at the datasheet.
need to enable the synchronous serial port in the kernel configuration.
Something like this:
Select Drivers for ETRAX 100LX...
Enable Synchronous serial port. If you enable synchronous serial port 0
you must disable serial port 1
if you enable synchronous serial port 1 you must disable serial port
kernel && make images
There are drawbacks with the hardware implementation of the synchronous serial
of device are you connecting? If the device can't handle a continuous clock
from us you will
be able to use the hardware synchronous serial port support.