[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Problem: Configuring RTC



Hi,

We are trying to set the date on the Etrax devboard-82.

For that, we have tried enabling rtc support in kernel, but it does not 
get initialised at boot up.
We have selected PCF8563 as the rtc.

I have attched the kernelconfig (kernel configuration) and the log.

Please let me know whether we have missed any option.

Also, if you could suggest any simpler way of setting date & time on 
devboard, will be of great help.

Thanks & Regards,
Vasant
Linux version 2.4.20 (root@xxxxxxx.25) #1 Thu Sep 25 17:10:09 IST 2003
ROM fs in RAM, size 1327104 bytes
Setting up paging and the MMU. 
On node 0 totalpages: 2048     
zone(0): 2048 pages.           
zone(1): 0 pages.              
zone(2): 0 pages.              
Linux/CRIS port on ETRAX 100LX (c) 2001, 2002 Axis Communications AB
Kernel command line: root=/dev/mtdblock3
PCF8563: Error initializing chip.
Calibrating delay loop... 99.73 BogoMIPS
Memory: 13240k/16384k available (803k kernel code, 3144k reserved, 217k data, 32k init)
kmem_create: Forcing size word alignment - mm_struct
kmem_create: Forcing size word alignment - filp
Dentry cache hash table entries: 2048 (order: 1, 16384 bytes)
Inode cache hash table entries: 1024 (order: 0, 8192 bytes)
kmem_create: Forcing size word alignment - inode_cache
Mount-cache hash table entries: 1024 (order: 0, 8192 bytes)
kmem_create: Forcing size word alignment - bdev_cache
kmem_create: Forcing size word alignment - cdev_cache
kmem_create: Forcing size word alignment - kiobuf
Buffer-cache hash table entries: 2048 (order: 0, 8192 bytes)
Page-cache hash table entries: 2048 (order: 0, 8192 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4     
Based upon Swansea University Computer Society NET3.039
kmem_create: Forcing size word alignment - sock
Initializing RT netlink socket 
Starting kswapd                
kmem_create: Forcing size word alignment - file_lock_cache
JFFS version 1.0, (C) 1999, 2000  Axis Communications AB
kmem_create: Forcing size word alignment - jffs_node
JFFS2 version 2.1. (C) 2001 Red Hat, Inc., designed by Axis Communications AB.
kmem_create: Forcing size word alignment - blkdev_requests
PPP generic driver version 2.4.2
PPP Deflate Compression module registered
SCSI subsystem driver Revision: 1.00
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
rtl8150.c: rtl8150 based usb-ethernet driver v0.4.1 (2002/07/22)
usb.c: registered new driver rtl8150
Initializing USB Mass Storage driver...
usb.c: registered new driver usb-storage
USB Mass Storage support registered.
ETRAX 100LX 10/100MBit ethernet v2.0 (c) 2000-2001 Axis Communications AB
eth0 initialized               
eth0: changed MAC to 00:40:8C:CD:00:00                          
ETRAX 100LX serial-driver 1.46 $, (c) 2000-2002 Axis Communications AB
ttyS0 at 0xb0000060 is a builtin UART with DMA
ttyS2 at 0xb0000070 is a builtin UART with DMA
cse0: Probing a 0x04000000 bytes large window at 0xe0000000.
cse0: Probing for AMD compatible flash...
cse0: Found 1 x 2MiB Atmel AT49xV16x at 0x0
cse1: Probing a 0x04000000 bytes large window at 0xe4000000.
cse1: Probing for AMD compatible flash...
cse1: Found no AMD compatible device at location zero
 Amd/Fujitsu Extended Query Table v1.2 at 0x0040
cse1: Swapping erase regions for broken CFI table.
number of CFI chips: 1         
Concatenating MTD devices:     
(0): "cse0"                    
(1): "cse1"                    
into device "cse0+cse1"        
cse0+cse1: 0x00600000 bytes of flash memory.
 Found a valid partition table at 0xf001000a-0xf0010056.
  /dev/flash1 at 0x00010000, size 0x00350000
  /dev/flash2 at 0x00360000, size 0x002a0000
Creating 3 MTD partitions on "cse0+cse1":
0x00000000-0x00010000 : "part0"
0x00010000-0x00360000 : "part1"
0x00360000-0x00600000 : "part2"
 Adding RAM partition for romfs image:
  /dev/flash3 at 0xc01b2da0, size 0x00144000
I2C driver v2.2, (c) 1999-2001 Axis Communications AB
EEPROM char device v0.3, (c) 2000 Axis Communications AB
eeprom: Assuming i2c compatible 16kB eeprom.
usb-host.c: ETRAX 100LX USB-HCD $Revision: 1.19 $ (c) 2001-2003 Axis Communications AB
                               
kmem_create: Forcing size word alignment - top_half_reg_cache
usb.c: new USB bus registered, assigned bus number 1
Product: USB ETRAX 100LX Root Hub
SerialNumber: ff               
hub.c: USB hub found           
hub.c: 2 ports detected        
PCF8563: Error initializing chip.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP   
kmem_create: Forcing size word alignment - ip_dst_cache
IP: routing cache hash table of 1024 buckets, 8Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
VFS: Mounted root (cramfs filesystem) readonly.
Freeing unused kernel memory: 32k freed
init: starting up.
usb-host.c: USB controller running.
hub.c: new USB device ETRAX 100LX-1, assigned address 2
Manufacturer: REALTEK          
Product: USB 10/100 LAN        
SerialNumber: 2816             
rtl8150.c: eth1: rtl8150 is detected
open: No such device
/sbin/rc.init: Mounting /mnt/flash... jffs2_scan_inode_node(): Data CRC failed on node at 0x0016b270: Read 0xf013b776, calculated 0x8faa2c21
done
Starting system initialization.

Copyright 2002 Axis Communications AB, distributed under the GPL.
http://developer.axis.com

Axis Developer Board 82 release 1.90

 * Mounting filesystems... 
mount: Mounting devpts on /dev/pts failed: No such device
                                                                         [ ok ]
 * Initializing /var... 
                                                                         [ ok ]
 * Determining MAC address... 
     + using saved MAC address: 00:40:8C:61:81:04
                                                                         [ ok ]
 * Setting hostname... 
     + hostname: "AxisProduct"
                                                                         [ ok ]
 * Initializing volatile resolver configuration...... 
                                                                         [ ok ]
 * Starting ipsetd... 
                                                                         [ ok ]
System initialization is done.
New runlevel: 3
 * Starting respawn daemon... 
                                                                         [ ok ]
 * Starting system and kernel logger... 
Jan  1 05:30:06 AxisProduct syslogd 1.4.1: restart.
     + system logger started
     + kernel logger started
                                                                         [ ok ]
 * Bringing lo up... 
                                                                         [ ok ]
 * Bringing eth0 up... 
eth0: changed MAC to 00:40:8C:61:81:04                          
     + hardware address: 00:40:8C:61:81:04
     + media: auto
     + boot protocol: none
     + IP address: 192.168.11.239
     + netmask: 255.255.255.0
     + broadcast address: 192.168.11.255
     + default gateway: 
                                                                         [ ok ]
 * Bringing eth1 up... 
eth1: changed MAC to 00:40:8C:61:81:05                          
     + hardware address: 00:40:8C:61:81:05
     + media: missing, using default
     + boot protocol: none
     + IP address: 192.168.1.90
     + netmask: 255.255.0.0
     + broadcast address: 192.168.255.255
     + default gateway: 
                                                                         [ ok ]
 * Waiting for a network interface... 
     + eth0 is up
                                                                         [ ok ]
 * Starting telnet server... 
telnetd: starting
  port: 23; interface: any; login program: /bin/login
                                                                         [ ok ]
 * Starting ftp server... 
Jan  1 05:30:09 AxisProduct vftpd[253]: Starting vftpd 0.01
                                                                         [ ok ]
 * Starting web server... 
                                                                         [ ok ]
All scripts for runlevel 3 are done.


BusyBox v0.60.5 (2003.09.24-11:23+0000) Built-in shell (ash)
Enter 'help' for a list of built-in commands.

sh: can't access tty; job control turned off
# z
z: No such file or directory
# 
#
# Automatically generated by make menuconfig: don't edit
#
CONFIG_UID16=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set

#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y

#
# Loadable module support
#
# CONFIG_MODULES is not set

#
# General setup
#
CONFIG_NET=y
# CONFIG_SYSVIPC is not set
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
CONFIG_BINFMT_ELF=y
# CONFIG_ETRAX_KGDB is not set
# CONFIG_ETRAX_WATCHDOG is not set
# CONFIG_ETRAX_FAST_TIMER is not set

#
# Hardware setup
#
# CONFIG_ETRAX100LX is not set
CONFIG_ETRAX100LX_V2=y
# CONFIG_SVINTO_SIM is not set
CONFIG_ETRAX_DRAM_VIRTUAL_BASE=c0000000
CONFIG_ETRAX_DRAM_SIZE=16
CONFIG_ETRAX_FLASH_BUSWIDTH=2
CONFIG_ETRAX_ROOT_DEVICE="/dev/mtdblock3"
CONFIG_ETRAX_PA_LEDS=y
# CONFIG_ETRAX_PB_LEDS is not set
# CONFIG_ETRAX_CSP0_LEDS is not set
# CONFIG_ETRAX_NO_LEDS is not set
CONFIG_ETRAX_LED1G=2
CONFIG_ETRAX_LED1R=2
CONFIG_ETRAX_LED2G=2
CONFIG_ETRAX_LED2R=2
CONFIG_ETRAX_LED3G=2
CONFIG_ETRAX_LED3R=2
# CONFIG_ETRAX_DEBUG_PORT0 is not set
# CONFIG_ETRAX_DEBUG_PORT1 is not set
CONFIG_ETRAX_DEBUG_PORT2=y
# CONFIG_ETRAX_DEBUG_PORT3 is not set
# CONFIG_ETRAX_DEBUG_PORT_NULL is not set
CONFIG_ETRAX_RESCUE_SER0=y
# CONFIG_ETRAX_RESCUE_SER1 is not set
# CONFIG_ETRAX_RESCUE_SER2 is not set
# CONFIG_ETRAX_RESCUE_SER3 is not set
CONFIG_ETRAX_DEF_R_WAITSTATES=95f8
CONFIG_ETRAX_DEF_R_BUS_CONFIG=104
CONFIG_ETRAX_SDRAM=y
CONFIG_ETRAX_DEF_R_SDRAM_CONFIG=00e03636
CONFIG_ETRAX_DEF_R_SDRAM_TIMING=80008002
CONFIG_ETRAX_DEF_R_PORT_PA_DIR=1d
CONFIG_ETRAX_DEF_R_PORT_PA_DATA=f0
CONFIG_ETRAX_DEF_R_PORT_PB_CONFIG=00
CONFIG_ETRAX_DEF_R_PORT_PB_DIR=10
CONFIG_ETRAX_DEF_R_PORT_PB_DATA=ff
# CONFIG_ETRAX_SOFT_SHUTDOWN is not set

#
# Drivers for ETRAX 100LX built-in interfaces
#
CONFIG_ETRAX_ETHERNET=y
CONFIG_NET_ETHERNET=y
# CONFIG_ETRAX_NETWORK_LED_ON_WHEN_LINK is not set
CONFIG_ETRAX_NETWORK_LED_ON_WHEN_ACTIVITY=y
# CONFIG_ETRAX_ETHERNET_LPSLAVE is not set
CONFIG_ETRAX_SERIAL=y
# CONFIG_ETRAX_SERIAL_FAST_TIMER is not set
# CONFIG_ETRAX_SERIAL_FLUSH_DMA_FAST is not set
CONFIG_ETRAX_SERIAL_RX_TIMEOUT_TICKS=5
CONFIG_ETRAX_SERIAL_PORT0=y
CONFIG_ETRAX_SER0_DTR_RI_DSR_CD_ON_NONE=y
# CONFIG_ETRAX_SER0_DTR_RI_DSR_CD_ON_PA is not set
# CONFIG_ETRAX_SER0_DTR_RI_DSR_CD_ON_PB is not set
# CONFIG_ETRAX_SER0_DTR_RI_DSR_CD_MIXED is not set
CONFIG_ETRAX_SER0_DTR_ON_PA_BIT=-1
CONFIG_ETRAX_SER0_RI_ON_PA_BIT=-1
CONFIG_ETRAX_SER0_DSR_ON_PA_BIT=-1
CONFIG_ETRAX_SER0_CD_ON_PA_BIT=-1
CONFIG_ETRAX_SER0_DTR_ON_PB_BIT=-1
CONFIG_ETRAX_SER0_RI_ON_PB_BIT=-1
CONFIG_ETRAX_SER0_DSR_ON_PB_BIT=-1
CONFIG_ETRAX_SER0_CD_ON_PB_BIT=-1
# CONFIG_ETRAX_SERIAL_PORT1 is not set
CONFIG_ETRAX_SERIAL_PORT2=y
CONFIG_ETRAX_SER2_DTR_RI_DSR_CD_ON_NONE=y
# CONFIG_ETRAX_SER2_DTR_RI_DSR_CD_ON_PA is not set
# CONFIG_ETRAX_SER2_DTR_RI_DSR_CD_ON_PB is not set
# CONFIG_ETRAX_SER2_DTR_RI_DSR_CD_MIXED is not set
CONFIG_ETRAX_SER2_DTR_ON_PA_BIT=-1
CONFIG_ETRAX_SER2_RI_ON_PA_BIT=-1
CONFIG_ETRAX_SER2_DSR_ON_PA_BIT=-1
CONFIG_ETRAX_SER2_CD_ON_PA_BIT=-1
CONFIG_ETRAX_SER2_DTR_ON_PB_BIT=-1
CONFIG_ETRAX_SER2_RI_ON_PB_BIT=-1
CONFIG_ETRAX_SER2_DSR_ON_PB_BIT=-1
CONFIG_ETRAX_SER2_CD_ON_PB_BIT=-1
# CONFIG_ETRAX_SERIAL_PORT3 is not set
# CONFIG_ETRAX_RS485 is not set
# CONFIG_ETRAX_SYNCHRONOUS_SERIAL is not set
# CONFIG_ETRAX_PARPORT is not set
# CONFIG_PARPORT is not set
# CONFIG_PARPORT_1284 is not set
# CONFIG_PRINTER is not set
# CONFIG_ETRAX_IDE is not set
# CONFIG_IDE is not set
CONFIG_ETRAX_AXISFLASHMAP=y
CONFIG_ETRAX_PTABLE_SECTOR=65536
CONFIG_MTD=y
CONFIG_MTD_CFI=y
CONFIG_MTD_CFI_AMDSTD=y
CONFIG_MTD_OBSOLETE_CHIPS=y
CONFIG_MTD_AMDSTD=y
CONFIG_MTD_CHAR=y
CONFIG_MTD_BLOCK=y
CONFIG_MTD_PARTITIONS=y
CONFIG_MTD_CONCAT=y
CONFIG_ETRAX_I2C=y
CONFIG_ETRAX_I2C_USES_PB_NOT_PB_I2C=y
CONFIG_ETRAX_I2C_DATA_PORT=0
CONFIG_ETRAX_I2C_CLK_PORT=1
CONFIG_ETRAX_I2C_EEPROM=y
# CONFIG_ETRAX_I2C_EEPROM_PROBE is not set
# CONFIG_ETRAX_I2C_EEPROM_2KB is not set
# CONFIG_ETRAX_I2C_EEPROM_8KB is not set
CONFIG_ETRAX_I2C_EEPROM_16KB=y
# CONFIG_ETRAX_GPIO is not set
# CONFIG_ETRAX_VIRTEX_FPGA is not set
CONFIG_ETRAX_USB_HOST=y
CONFIG_USB=y
CONFIG_ETRAX_USB_HOST_PORT1=y
CONFIG_ETRAX_USB_HOST_PORT2=y
CONFIG_ETRAX_RTC=y
# CONFIG_ETRAX_DS1302 is not set
CONFIG_ETRAX_PCF8563=y

#
# Memory Technology Devices (MTD)
#
CONFIG_MTD=y
# CONFIG_MTD_DEBUG is not set
CONFIG_MTD_PARTITIONS=y
CONFIG_MTD_CONCAT=y
# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CHAR=y
CONFIG_MTD_BLOCK=y
# CONFIG_FTL is not set
# CONFIG_NFTL is not set

#
# RAM/ROM/Flash chip drivers
#
CONFIG_MTD_CFI=y
# CONFIG_MTD_JEDECPROBE is not set
CONFIG_MTD_GEN_PROBE=y
# CONFIG_MTD_CFI_ADV_OPTIONS is not set
# CONFIG_MTD_CFI_INTELEXT is not set
CONFIG_MTD_CFI_AMDSTD=y
CONFIG_MTD_RAM=y
# CONFIG_MTD_ROM is not set
# CONFIG_MTD_ABSENT is not set
CONFIG_MTD_OBSOLETE_CHIPS=y
CONFIG_MTD_AMDSTD=y
# CONFIG_MTD_SHARP is not set
# CONFIG_MTD_JEDEC is not set

#
# Mapping drivers for chip access
#
# CONFIG_MTD_PHYSMAP is not set
# CONFIG_MTD_PCI is not set

#
# Self-contained MTD device drivers
#
# CONFIG_MTD_PMC551 is not set
# CONFIG_MTD_SLRAM is not set
CONFIG_MTD_MTDRAM=y
CONFIG_MTDRAM_TOTAL_SIZE=0
CONFIG_MTDRAM_ERASE_SIZE=64
CONFIG_MTDRAM_ABS_POS=0
# CONFIG_MTD_BLKMTD is not set
# CONFIG_MTD_DOC1000 is not set
# CONFIG_MTD_DOC2000 is not set
# CONFIG_MTD_DOC2001 is not set
# CONFIG_MTD_DOCPROBE is not set

#
# NAND Flash Device Drivers
#
# CONFIG_MTD_NAND is not set

#
# Parallel port support
#
# CONFIG_PARPORT is not set

#
# Plug and Play configuration
#
# CONFIG_PNP is not set
# CONFIG_ISAPNP is not set

#
# Block devices
#
# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_DEV_XD is not set
# CONFIG_PARIDE is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_CISS_SCSI_TAPE is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_LOOP is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_RAM is not set
# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_BLK_STATS is not set

#
# Multi-device support (RAID and LVM)
#
# CONFIG_MD is not set
# CONFIG_BLK_DEV_MD is not set
# CONFIG_MD_LINEAR is not set
# CONFIG_MD_RAID0 is not set
# CONFIG_MD_RAID1 is not set
# CONFIG_MD_RAID5 is not set
# CONFIG_MD_MULTIPATH is not set
# CONFIG_BLK_DEV_LVM is not set

#
# PCMCIA/CardBus support
#
# CONFIG_PCMCIA is not set

#
# Networking options
#
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
# CONFIG_NETLINK_DEV is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
CONFIG_FILTER=y
CONFIG_UNIX=y
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
# CONFIG_IP_ADVANCED_ROUTER is not set
# CONFIG_IP_PNP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_ARPD is not set
# CONFIG_INET_ECN is not set
# CONFIG_SYN_COOKIES is not set

#
#   IP: Netfilter Configuration
#
# CONFIG_IP_NF_CONNTRACK is not set
# CONFIG_IP_NF_QUEUE is not set
# CONFIG_IP_NF_IPTABLES is not set
# CONFIG_IP_NF_ARPTABLES is not set
# CONFIG_IP_NF_COMPAT_IPCHAINS is not set
# CONFIG_IP_NF_COMPAT_IPFWADM is not set
# CONFIG_IPV6 is not set
# CONFIG_KHTTPD is not set
# CONFIG_ATM is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set

#
# Appletalk devices
#
# CONFIG_DEV_APPLETALK is not set
# CONFIG_DECNET is not set
# CONFIG_BRIDGE is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_LLC is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_FASTROUTE is not set
# CONFIG_NET_HW_FLOWCONTROL is not set

#
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set

#
# Network testing
#
# CONFIG_NET_PKTGEN is not set

#
# Telephony Support
#
# CONFIG_PHONE is not set
# CONFIG_PHONE_IXJ is not set
# CONFIG_PHONE_IXJ_PCMCIA is not set

#
# ATA/IDE/MFM/RLL support
#
# CONFIG_IDE is not set
# CONFIG_BLK_DEV_IDE_MODES is not set
# CONFIG_BLK_DEV_HD is not set

#
# SCSI support
#
CONFIG_SCSI=y
CONFIG_BLK_DEV_SD=y
CONFIG_SD_EXTRA_DEVS=40
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
# CONFIG_BLK_DEV_SR is not set
# CONFIG_CHR_DEV_SG is not set
# CONFIG_SCSI_DEBUG_QUEUES is not set
# CONFIG_SCSI_MULTI_LUN is not set
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set

#
# SCSI low-level drivers
#
# CONFIG_SCSI_7000FASST is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AHA152X is not set
# CONFIG_SCSI_AHA1542 is not set
# CONFIG_SCSI_AHA1740 is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_IN2000 is not set
# CONFIG_SCSI_AM53C974 is not set
# CONFIG_SCSI_MEGARAID is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_DTC3280 is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_EATA_DMA is not set
# CONFIG_SCSI_EATA_PIO is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_GENERIC_NCR5380 is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_NCR53C406A is not set
# CONFIG_SCSI_NCR53C7xx is not set
# CONFIG_SCSI_PAS16 is not set
# CONFIG_SCSI_PCI2000 is not set
# CONFIG_SCSI_PCI2220I is not set
# CONFIG_SCSI_PSI240I is not set
# CONFIG_SCSI_QLOGIC_FAS is not set
# CONFIG_SCSI_SIM710 is not set
# CONFIG_SCSI_SYM53C416 is not set
# CONFIG_SCSI_T128 is not set
# CONFIG_SCSI_U14_34F is not set
# CONFIG_SCSI_DEBUG is not set

#
# I2O device support
#
# CONFIG_I2O is not set
# CONFIG_I2O_BLOCK is not set
# CONFIG_I2O_LAN is not set
# CONFIG_I2O_SCSI is not set
# CONFIG_I2O_PROC is not set

#
# Network device support
#
CONFIG_NETDEVICES=y

#
# ARCnet devices
#
# CONFIG_ARCNET is not set
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
# CONFIG_ETHERTAP is not set

#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
# CONFIG_SUNLANCE is not set
# CONFIG_SUNBMAC is not set
# CONFIG_SUNQE is not set
# CONFIG_SUNGEM is not set
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_LANCE is not set
# CONFIG_NET_VENDOR_SMC is not set
# CONFIG_NET_VENDOR_RACAL is not set
# CONFIG_NET_ISA is not set
# CONFIG_NET_PCI is not set
# CONFIG_NET_POCKET is not set

#
# Ethernet (1000 Mbit)
#
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_MYRI_SBUS is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_SK98LIN is not set
# CONFIG_TIGON3 is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PLIP is not set
CONFIG_PPP=y
# CONFIG_PPP_MULTILINK is not set
# CONFIG_PPP_FILTER is not set
CONFIG_PPP_ASYNC=y
# CONFIG_PPP_SYNC_TTY is not set
CONFIG_PPP_DEFLATE=y
# CONFIG_PPP_BSDCOMP is not set
# CONFIG_PPPOE is not set
# CONFIG_SLIP is not set

#
# Wireless LAN (non-hamradio)
#
# CONFIG_NET_RADIO is not set

#
# Token Ring devices
#
# CONFIG_TR is not set
# CONFIG_NET_FC is not set
# CONFIG_RCPCI is not set
# CONFIG_SHAPER is not set

#
# Wan interfaces
#
# CONFIG_WAN is not set

#
# Amateur Radio support
#
# CONFIG_HAMRADIO is not set

#
# IrDA (infrared) support
#
# CONFIG_IRDA is not set

#
# ISDN subsystem
#
# CONFIG_ISDN is not set

#
# Old CD-ROM drivers (not SCSI, not IDE)
#
# CONFIG_CD_NO_IDESCSI is not set

#
# Input core support
#
# CONFIG_INPUT is not set
# CONFIG_INPUT_KEYBDEV is not set
# CONFIG_INPUT_MOUSEDEV is not set
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_EVDEV is not set

#
# Character devices
#
# CONFIG_VT is not set
# CONFIG_SERIAL is not set
# CONFIG_SERIAL_EXTENDED is not set
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_UNIX98_PTYS is not set

#
# I2C support
#
# CONFIG_I2C is not set

#
# Mice
#
# CONFIG_BUSMOUSE is not set
# CONFIG_MOUSE is not set

#
# Joysticks
#
# CONFIG_INPUT_GAMEPORT is not set
# CONFIG_QIC02_TAPE is not set

#
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
# CONFIG_AMD_PM768 is not set
# CONFIG_NVRAM is not set
# CONFIG_RTC is not set
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set

#
# Ftape, the floppy tape device driver
#
# CONFIG_FTAPE is not set
# CONFIG_AGP is not set
# CONFIG_DRM is not set

#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set

#
# File systems
#
# CONFIG_QUOTA is not set
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_REISERFS_CHECK is not set
# CONFIG_REISERFS_PROC_INFO is not set
# CONFIG_ADFS_FS is not set
# CONFIG_ADFS_FS_RW is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BEFS_DEBUG is not set
# CONFIG_BFS_FS is not set
# CONFIG_EXT3_FS is not set
# CONFIG_JBD is not set
# CONFIG_JBD_DEBUG is not set
# CONFIG_FAT_FS is not set
# CONFIG_MSDOS_FS is not set
# CONFIG_UMSDOS_FS is not set
# CONFIG_VFAT_FS is not set
# CONFIG_EFS_FS is not set
CONFIG_JFFS_FS=y
CONFIG_JFFS_FS_VERBOSE=0
# CONFIG_JFFS_PROC_FS is not set
CONFIG_JFFS2_FS=y
CONFIG_JFFS2_FS_DEBUG=0
CONFIG_CRAMFS=y
CONFIG_TMPFS=y
CONFIG_RAMFS=y
# CONFIG_ISO9660_FS is not set
# CONFIG_JOLIET is not set
# CONFIG_ZISOFS is not set
# CONFIG_JFS_FS is not set
# CONFIG_JFS_DEBUG is not set
# CONFIG_JFS_STATISTICS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_NTFS_FS is not set
# CONFIG_NTFS_RW is not set
# CONFIG_HPFS_FS is not set
CONFIG_PROC_FS=y
# CONFIG_DEVFS_FS is not set
# CONFIG_DEVFS_MOUNT is not set
# CONFIG_DEVFS_DEBUG is not set
# CONFIG_DEVPTS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_QNX4FS_RW is not set
# CONFIG_ROMFS_FS is not set
CONFIG_EXT2_FS=y
# CONFIG_SYSV_FS is not set
# CONFIG_UDF_FS is not set
# CONFIG_UDF_RW is not set
# CONFIG_UFS_FS is not set
# CONFIG_UFS_FS_WRITE is not set

#
# Network File Systems
#
# CONFIG_CODA_FS is not set
# CONFIG_INTERMEZZO_FS is not set
# CONFIG_NFS_FS is not set
# CONFIG_NFS_V3 is not set
# CONFIG_ROOT_NFS is not set
# CONFIG_NFSD is not set
# CONFIG_NFSD_V3 is not set
# CONFIG_NFSD_TCP is not set
# CONFIG_SUNRPC is not set
# CONFIG_LOCKD is not set
CONFIG_SMB_FS=y
# CONFIG_SMB_NLS_DEFAULT is not set
# CONFIG_NCP_FS is not set
# CONFIG_NCPFS_PACKET_SIGNING is not set
# CONFIG_NCPFS_IOCTL_LOCKING is not set
# CONFIG_NCPFS_STRONG is not set
# CONFIG_NCPFS_NFS_NS is not set
# CONFIG_NCPFS_OS2_NS is not set
# CONFIG_NCPFS_SMALLDOS is not set
# CONFIG_NCPFS_NLS is not set
# CONFIG_NCPFS_EXTRAS is not set
# CONFIG_ZISOFS_FS is not set

#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_SMB_NLS=y
CONFIG_NLS=y

#
# Native Language Support
#
CONFIG_NLS_DEFAULT="iso8859-1"
# CONFIG_NLS_CODEPAGE_437 is not set
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
# CONFIG_NLS_CODEPAGE_850 is not set
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
# CONFIG_NLS_ISO8859_1 is not set
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
# CONFIG_NLS_ISO8859_15 is not set
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_UTF8 is not set

#
# Sound
#
# CONFIG_SOUND is not set

#
# USB support
#
CONFIG_USB=y
CONFIG_USB_DEBUG=y
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_BANDWIDTH is not set
# CONFIG_USB_LONG_TIMEOUT is not set
# CONFIG_USB_EHCI_HCD is not set
# CONFIG_USB_UHCI is not set
# CONFIG_USB_UHCI_ALT is not set
# CONFIG_USB_OHCI is not set
# CONFIG_USB_AUDIO is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_BLUETOOTH is not set
# CONFIG_USB_MIDI is not set
CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
# CONFIG_USB_STORAGE_DPCM is not set
# CONFIG_USB_STORAGE_HP8200e is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
# CONFIG_USB_HID is not set
# CONFIG_USB_HIDINPUT is not set
# CONFIG_USB_HIDDEV is not set
# CONFIG_USB_KBD is not set
# CONFIG_USB_MOUSE is not set
# CONFIG_USB_AIPTEK is not set
# CONFIG_USB_WACOM is not set
# CONFIG_USB_DC2XX is not set
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_SCANNER is not set
# CONFIG_USB_MICROTEK is not set
# CONFIG_USB_HPUSBSCSI is not set
# CONFIG_USB_PEGASUS is not set
CONFIG_USB_RTL8150=y
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_CATC is not set
# CONFIG_USB_CDCETHER is not set
# CONFIG_USB_USBNET is not set
# CONFIG_USB_USS720 is not set

#
# USB Serial Converter support
#
# CONFIG_USB_SERIAL is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_AUERSWALD is not set
# CONFIG_USB_TIGL is not set
# CONFIG_USB_BRLVGER is not set
# CONFIG_USB_LCD is not set

#
# Kernel hacking
#
# CONFIG_PROFILE is not set

#
# Library routines
#
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y