[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: 2.4.19 kernel panic



I have got the Developer Board LX with USB port connected according to: 
 http://developer.axis.com/doc/hardware/devboard_lx/USB_Devboard_LX.pdf.
Do you think that it can be hardware problem?



Dne st 5. listopad 2003 10:53 jste napsal(a):
> Karel Šín wrote:
> > In the boot log I found, that the camera don't accept the USB address. I
> >
> > don't undertand, where can be the problem, because I use this same
> > stv680
> > driver on PC, and it works well. I send you the boot log in the
> > attachement.
>
> The relevant part of the boot log is repeated below:
>
> init: starting up.
> usb-host.c: USB controller running.
> hub.c: USB new device connect on bus1/2, assigned device number 2
> usb-host.c: Got epid attn for control endpoint, epid 0
> usb-host.c: 3rd error for epid 0
> usb-host.c: Completing ctrl urb with status -71.
> usb.c: USB device not accepting new address=2 (error=-71)
>
> The device enumeration is basically the first thing that happens when
> you plug in a USB device, and since you say that the device works fine
> with your host PC, it's probably an electrical problem with the USB port
> on your board.  Is this a modified Developer Board LX or an Axis 82
> Developer Board?