[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: ifconfig resets the Etrax MCM CPU



>
>The funniest thing is, if I remove the call to ifconfig hw the network
>works without problems (but with the default MAC of course).  I can call
>it later at the prompt without the crash. FTP, Telnet or http, everything
>works.

Update: I compiled my modified kernel with the kernelconfig file that was
included with the SDK (changed the busconfig and timings of course...) ,
now it works with the ifconfig hw ether eth0 command...
>
>2. I've got an error at the end of the startup, something like /bin/sh/
>Can't access tty, job control disabled. Any ideas ?

This problem remains....even with the original .config file....
>
>Thanks for your help....
>Dipl. Inform. Arne Bockholdt
>REA Elektronik GmbH
>Teichwiesenstr. 1
>64367 Mühltal-Waschenbach
>Tel. +49 (0) 6154 / 638-115, Fax -195
>ABockholdt@xxxxxxx.de
>



Dipl. Inform. Arne Bockholdt
REA Elektronik GmbH
Teichwiesenstr. 1
64367 Mühltal-Waschenbach
Tel. +49 (0) 6154 / 638-115, Fax -195
ABockholdt@xxxxxxx.de