[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
RE: Interrupts on PAR0 in manual mode
This seams to be a very popular question (see the archives).
There is no way to get an interrupt on any of the parallel
port pins when in manual mode. The Port A pins and the IRQ
pin can be used to generate IRQs.
From: firstname.lastname@example.org">mailto:email@example.com] On
Behalf Of Johan Neven
Sent: Wednesday, January 21, 2004 12:05 PM
Subject: Interrupts on PAR0 in manual mode
Is it possible to have interrupts from the parallel-port interface when
using it in manual mode?
If yes, via which parallel-port pin can this interrupt be initiated?
Johan Neven <firstname.lastname@example.org>