[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: ptablespec



Hi,

JFFS needs at least 5 blocks (0x050000). 4 block may work for a short
while
but will create problems in the long run.

/Mikael

-----Original Message-----
From: owner-dev-etrax@xxxxxxx.com">mailto:owner-dev-etrax@xxxxxxx.com] On
Behalf Of Philippe Frossard
Sent: Wednesday, February 18, 2004 3:41 PM
To: dev-etrax
Subject: ptablespec


I'm using cris-dist-1.25 for devboard_lx and devboard_lx-R2_1_0, 
linux-2.4.14.
I changed the ptablespec like this (For increase flash1 partition) :

# name size     rw-options  type      image-file
rescue 0x010000 ro          rescue    rescue.img
flash1 0x1d0000 ro          kernel    flash1.img
flash2 0x020000 rw          jffs      flash2.img

I executed flashit successfully but the flash2 partition is not mount 
(There isn't fstab file).

Mounting proc on 
/proc


Mounting /dev/flash2 on 
/mnt/flash


Axis Developer Board LX release 
2.1.0


Mounting tmpfs on 
/var


Initializing 
/var


Setting up eth0 with ip 192.168.0.10 and mac 
00:40:8C:62:E0:A9


eth0: changed MAC to 
00:40:8C:62:E0:A9


Setting up lo with ip 
127.0.0.1


Default gateway is 
192.168.0.1


Hostname is 
""


Domainname is 
""


Nameserver is 
""


Adding hostname to hosts 
file


/usr/rc.d/S45hosts: cannot create /etc/hosts: file system 
full



[root@/]57# 
df


Filesystem           1k-blocks      Used Available Use% Mounted 
on

/dev/flash3               3208      3208         0 100% 
/


tmpfs                     3504        40      3464   1% 
/var