[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: ptablespec (I lost 1Mb in the flash3 partition)
You are right, the devboard_lx use MBM29LV320 (4Mx8) ...
Jonas Holmberg a écrit:
>On Thu, Feb 19, 2004 at 12:28:48PM +0100, Philippe Frossard wrote:
>>My ptablespec file is like this and devboard_lx run very well !
>># name size rw-options type image-file
>>rescue 0x010000 ro rescue rescue.img
>>flash1 0x1f0000 ro kernel flash1.img
>>flash2 0x100000 rw jffs flash2.img
>I haven't payed enough attention to all posts in this thread so I'm
>not sure what hardware you are using, but if you are using the
>Developer Board LX hardware (as opposed to the Delevloper Board 82) it
>probably has 4MB flash. Earlier versions only had 2MB flash, so the
>devboard_lx software uses a partitiontable for 2MB flash to make it
>work in both versions.
>If you use all 4MB you may run into problems during ftp-upgrade, since
>the 8MB RAM of the Developer Board LX may not be enough to hold a 4MB
>flash-image and run the kernel and all applications used during
>upgrade at the same time. So if using only 3MB is enough for you, keep
>it. Otherwise increase it up to max 4MB, but make sure that you test
>ftp-upgrade if you intend to use it.