[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Devboard 83 ktest KERNEL PANIC



Hi guys, 

I just recompiled a 2.4.22 kernel with the changes proposed for the USB 
mass storage devices (just changed debug port to 0 and rescue port to 
2) and tried a ktest.

It fails, and I don't have a clue on why. The kernel is doing like normal.
Any ideas ? (I have full kernel logs for both "normal" factory default and 
ktest try, if needed, mail me).

I don't dare to flashit, as there is still no "rescue image" available for 
download to restore the factory default (or did I miss it ?).

Any help is appreciated.

Best regards, Michael


Here's the kernel log from serial port:

cse0: Probing a 0x04000000 bytes large window at 0xe0000000.
cse0: Probing for AMD compatible flash...
cse0: Found 1 x 2MiB Atmel AT49xV16x at 0x0
cse1: Probing a 0x04000000 bytes large window at 0xe4000000.
cse1: Probing for AMD compatible flash...
cse1: Found no AMD compatible device at location zero
Amd/Fujitsu Extended Query Table v1.3 at 0x0040
cse1: Swapping erase regions for broken CFI table.
number of CFI chips: 1
cfi_cmdset_0002: Disabling fast programming due to code brokenness.
Concatenating MTD devices:
 (0): "cse0"
 (1): "cse1"
into device "cse0+cse1"
cse0+cse1: 0x00600000 bytes of flash memory.
Found a valid partition table at 0xf001000a-0xf0010056.
 /dev/flash1 at 0x00010000, size 0x00350000
 /dev/flash2 at 0x00360000, size 0x002a0000
Creating 3 MTD partitions on "cse0+cse1":
 0x00000000-0x00010000 : "part0"
 0x00010000-0x00360000 : "part1"
 0x00360000-0x00600000 : "part2"
Adding RAM partition for romfs image:
/dev/flash3 at 0xc01e04c0, size 0x0014c000
GPIO port G: in_bits: 0x3FFFFF3E out_bits: 0x3E00003F val: F1FFFFFE
GPIO port G: dir: 00000001 changeable: 01FFFF01
ETRAX 100LX GPIO driver v2.5, (c) 2001, 2002 Axis Communications AB
usb-host.c: ETRAX 100LX USB-HCD $Revision: 1.19 $ (c) 2001-2003 Axis 
Communications AB
kmem_create: Forcing size word alignment - top_half_reg_cache
usb.c: new USB bus registered, assigned bus number 1
Product: USB ETRAX 100LX Root Hub SerialNumber: ff
hub.c: USB hub found
hub.c: 2 ports detected
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
kmem_create: Forcing size word alignment - ip_dst_cache
IP: routing cache hash table of 1024 buckets, 8Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
VFS: Mounted root (cramfs filesystem) readonly.
Freeing unused kernel memory: 32k freed
init: starting up.
init: open /etc/inittab: No such file or directory
Kernel panic: Attempted to kill init!