[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: Sync Serial 1



A guess is that you have the normal serial port 1 enabled. This must be 
disabled to run the synchronous serial port ("Serial port 1 enabled" in
kernelconfig). 

How does the kernel crash? With some kind of panic printout or with
a kernel oops? If it dies with an OOPS you can do

cd os/linux
ksymoops -v vmlinux -K -L -O -m System.map 

and then copy-paste the OOPS output and email me the result.

Can you tell me more about your usage of the sync serial 
port? In some cases the sync serial port is not as useful as you might
expect.

/Mikael

-----Original Message-----
From: owner-dev-etrax@xxxxxxx.com">mailto:owner-dev-etrax@xxxxxxx.com] On
Behalf Of Peter van Duijn
Sent: Thursday, May 13, 2004 10:19 AM
To: dev-etrax
Subject: Sync Serial 1


Hi group,

Can anyone help me with my Sync serial problem.
I'm working on the Devboard 82 and I'm trying to enable the syncserial 1
port.
But every time boot up with a kernel that has the sync serial port 1
enabled (and async 3 disabled),
the kernel crashes :-(

Any suggestions ?

Regards,
Peter