[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: MMU Bus fault



Hi Orjan

One final question.

We are still trying to get to a singular problem definition where I know at
least which module contains the problem. We've seen something work and are
still trying to prove under which scenarios we have a working system. Apart
from that we do not know whether the problem is with the axis usb driver or
with the device driver.

Could you provide me with some overview so that we can understand what the
problem may be.

Regards

Cedric
----- Original Message -----
From: "Orjan Friberg" <orjan.friberg@xxxxxxx.com>
To: <cedric.stevens@xxxxxxx.za>
Cc: <dev-etrax@xxxxxxx.com>
Sent: Monday, May 17, 2004 4:18 PM
Subject: Re: MMU Bus fault


> cedric.stevens@xxxxxxx.za wrote:
> > Hi Orjan
> >
> > USB Port 1 disabled.
> >
> > The interface works perfect. Thank you.
> >
> > No. Please explain why both USB Ports can not function together. Also,
my
> > ethenet port 0 is still fully functional.
>
> The two USB ports *should* function together - I've run a second
> USB-to-Ethernet device, as well as a USB mass storage device on port 2,
> in addition to the built-in USB-to-Ethernet device on port 1.  So,
> there's no general problem running traffic on both ports.  (Ethernet
> port 0 is not connected via USB, so that's why it's not affected by
> disabling USB port 1.)
>
> Without a device such as yours at hand, it will be difficult to say
> what's wrong.  Please contact Fredrik Norrman (fredrik.norrman@xxxxxxx.com)
> if this is something you want fixed.
>
> --
> Orjan Friberg
> Axis Communications
>
>