[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Devboard LX release



> On Fri, 2004-06-04 at 00:30, Stefan Schober wrote:
>> Hi,
>>
>> good news, but ...
>>
>> building the package runs out of the box, but flashing fails:
>
>> (delos) /home/stenny/Data/axis/devboard_lx$ ./flashit
>> (standard_in) 2: parse error
>> boot_linux: Invalid size to flash
>
> On line 24 in the flashit script, try changing the string "jffs" to
> "jffs2".
>
>
>


Hi,

I have a problems when I want to flash my devboard_bt.
the devboard don't found the init when she reboot, look at the sermon output:


Serial interface initialized.


Device ID = 0x05FAEC6B
This bootloader hacked by root Thu Jun  3 10:45:11 CEST 2004.Checksum of
bootloader is 0x000A1EDB
Waiting for load info.
Checksum of file is 0x00000CAC
Got load info.
SET_REGISTER
0xB0000000
0x000095F8
SET_REGISTER
0xB0000004
0x00000104
SET_REGISTER
0xB000000C
0x1AA00060
SET_REGISTER
0xB0000008
0x00005751
SET_REGISTER
0xB0000030
0x0000FC00
SET_REGISTER
0xB0000038
0x00007F7F
PACKET_INFO
0xC0004000
0x00400018
Checksum of file is 0x308CD629
FLASH
0xC0014000
0x00010000
0x003F0000
CFI dev 0x80000000
CFI dev 0x84000000
0x80010000: Erasing 0x001F0000 bytes...done, verifying...OK
0x80010000: Writing 0x001F0000 bytes...verified
0x84000000: Erasing 0x00200000 bytes...done, verifying...OK
0x84000000: Writing 0x00200000 bytes...verified
JUMP
0x00000000
Uncompressing Linux...
Done. Now booting the kernel.
Linux version 2.4.19 (root@xxxxxxx.1 Axis
release R55/1.55) #8 Thu Jun 3 13:33:58 CEST 2004
Setting up paging and the MMU.
On node 0 totalpages: 2048
zone(0): 2048 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Linux/CRIS port on ETRAX 100LX (c) 2001, 2002 Axis Communications AB
Kernel command line: root=/dev/mtdblock3
Enabling watchdog...
Calibrating delay loop... 99.73 BogoMIPS
Memory: 14600k/16384k available (1023k kernel code, 1784k reserved, 420k
data, 40k init)
kmem_create: Forcing size word alignment - mm_struct
kmem_create: Forcing size word alignment - filp
Dentry cache hash table entries: 2048 (order: 1, 16384 bytes)Inode cache
hash table entries: 1024 (order: 0, 8192 bytes)
kmem_create: Forcing size word alignment - inode_cache
Mount-cache hash table entries: 1024 (order: 0, 8192 bytes)
kmem_create: Forcing size word alignment - bdev_cache
kmem_create: Forcing size word alignment - cdev_cache
Buffer-cache hash table entries: 2048 (order: 0, 8192 bytes)
Page-cache hash table entries: 2048 (order: 0, 8192 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
kmem_create: Forcing size word alignment - sock
Initializing RT netlink socket
Starting kswapd
kmem_create: Forcing size word alignment - file lock cache
JFFS version 1.0, (C) 1999, 2000  Axis Communications AB
kmem_create: Forcing size word alignment - jffs_node
Bluetooth Driver v1.3, Copyright (c) 2000, 2001, 2002 Axis Communications AB
BT SYS: Bluetooth driver registered as ttyBT
BT SYS: Bluetooth line discipline registered.
BT SYS: Registering BT proc files
Proc entry registered
BT SYS: Bluetooth Driver Using ttyBT[0-6] (data), ttyBTC (ctrl [7])
BNEP driver v0.1 (c) 2002 Axis Communications AB
bnep0 initialized
bnep1 initialized
bnep2 initialized
bnep3 initialized
bnep4 initialized
bnep5 initialized
bnep6 initialized
kmem_create: Forcing size word alignment - blkdev_requests
PPP generic driver version 2.4.2
PPP Deflate Compression module registered
ETRAX 100LX 10/100MBit ethernet v2.0 (c) 2000-2001 Axis Communications AB
eth0 initialized
eth0: changed MAC to 00:40:8C:CD:00:00
ETRAX 100LX serial-driver 1.40 $, (c) 2000-2002 Axis Communications AB
ttyS0 at 0xb0000060 is a builtin UART with DMA
ttyS2 at 0xb0000070 is a builtin UART with DMA
ttyS3 at 0xb0000078 is a builtin UART with DMA
fast_timer_init()
cse0: Probing a 0x04000000 bytes large window at 0xe0000000.
cse0: Probing for AMD compatible flash...
cse0: Found 1 x 2MiB Fujitsu MBM29LV160TE at 0x0
cse1: Probing a 0x04000000 bytes large window at 0xe4000000.
cse1: Probing for AMD compatible flash...
cse1: Found 1 x 2MiB Fujitsu MBM29LV160TE at 0x0
Concatenating MTD devices:
(0): "cse0"
(1): "cse1"
into device "cse0+cse1"
cse0+cse1: 0x00400000 bytes of flash memory.
 Found a valid partition table at 0xf001000a-0xf0010056.
  /dev/flash1 at 0x00010000, size 0x003a0000
  /dev/flash2 at 0x003b0000, size 0x00050000
 Adding readonly flash partition for romfs image:
  /dev/flash3 at 0x000ae7dc, size 0x0014a000
Creating 4 MTD partitions on "cse0+cse1":
0x00000000-0x00010000 : "part0"
0x00010000-0x003b0000 : "part1"
0x003b0000-0x00400000 : "part2"
0x000ae7dc-0x001f87dc : "romfs"
GPIO port G: in_bits: 0x3FFF003F out_bits: 0x3E00FF3E val: 7DFF00C1
GPIO port G: dir: 0000FF00 changeable: 01FFFF01
ETRAX 100LX GPIO driver v2.5, (c) 2001, 2002 Axis Communications AB
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
kmem_create: Forcing size word alignment - ip_dst_cache
IP: routing cache hash table of 1024 buckets, 8Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
ip_conntrack (128 buckets, 1024 max)
ip_tables: (C) 2000-2002 Netfilter core team
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
IPv6 v0.8 for NET4.0
kmem_create: Forcing size word alignment - ip6_dst_cache
IPv6 over IPv4 tunneling driver
ip6_tables: (C) 2000-2002 Netfilter core team
NET4: Ethernet Bridge 008 for NET4.0
VFS: Mounted root (cramfs filesystem) readonly.
Freeing unused kernel memory: 40k freed
Kernel panic: No init found.  Try passing init= option to kernel.
 Kernel panic: No init found.  Try passing init= option to kernel.
 Kernel panic: No init found.  Try passing init= option to kernel.

 Kernel panic: No init found.  Try passing init= option to kernel.
 Kernel panic: No init found.  Try passing init= option to kernel.
 Kernel panic: No init found.  Try passing init= option to kernel.
 Kernel panic: No init found.  Try passing init= option to kernel.
 Kernel panic: No init found.  Try passing init= option to kernel.



regards,

-------------
amine