[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: reboot problem



Hello,

Check that CONFIG_ETRAX_CMDLINE="root=/dev/mtdblock3 init=/linuxrc".

Best Regards,
Anders

> -----Original Message-----
> From: owner-dev-etrax@xxxxxxx.com]On">mailto:owner-dev-etrax@xxxxxxx.com]On
> Behalf Of amine@xxxxxxx.com
> Sent: den 4 juni 2004 09:40
> To: dev-etrax
> Cc: amine@xxxxxxx.com
> Subject: reboot problem
> 
> 
> > On Fri, 2004-06-04 at 00:30, Stefan Schober wrote:
> >> Hi,
> >>
> >> good news, but ...
> >>
> >> building the package runs out of the box, but flashing fails:
> >
> >> (delos) /home/stenny/Data/axis/devboard_lx$ ./flashit
> >> (standard_in) 2: parse error
> >> boot_linux: Invalid size to flash
> >
> > On line 24 in the flashit script, try changing the string "jffs" to
> > "jffs2".
> >
> >
> >
> 
> 
> Hi,
> 
> I have a problems when I want to flash my devboard_bt.
> the devboard don't found the init when she reboot, look at 
> the sermon output:
> 
> 
> Serial interface initialized.
> 
> 
> Device ID = 0x05FAEC6B
> This bootloader hacked by root Thu Jun  3 10:45:11 CEST 
> 2004.Checksum of
> bootloader is 0x000A1EDB
> Waiting for load info.
> Checksum of file is 0x00000CAC
> Got load info.
> SET_REGISTER
> 0xB0000000
> 0x000095F8
> SET_REGISTER
> 0xB0000004
> 0x00000104
> SET_REGISTER
> 0xB000000C
> 0x1AA00060
> SET_REGISTER
> 0xB0000008
> 0x00005751
> SET_REGISTER
> 0xB0000030
> 0x0000FC00
> SET_REGISTER
> 0xB0000038
> 0x00007F7F
> PACKET_INFO
> 0xC0004000
> 0x00400018
> Checksum of file is 0x308CD629
> FLASH
> 0xC0014000
> 0x00010000
> 0x003F0000
> CFI dev 0x80000000
> CFI dev 0x84000000
> 0x80010000: Erasing 0x001F0000 bytes...done, verifying...OK
> 0x80010000: Writing 0x001F0000 bytes...verified
> 0x84000000: Erasing 0x00200000 bytes...done, verifying...OK
> 0x84000000: Writing 0x00200000 bytes...verified
> JUMP
> 0x00000000
> Uncompressing Linux...
> Done. Now booting the kernel.
> Linux version 2.4.19 (root@xxxxxxx.com) (gcc 
> version 3.2.1 Axis
> release R55/1.55) #8 Thu Jun 3 13:33:58 CEST 2004
> Setting up paging and the MMU.
> On node 0 totalpages: 2048
> zone(0): 2048 pages.
> zone(1): 0 pages.
> zone(2): 0 pages.
> Linux/CRIS port on ETRAX 100LX (c) 2001, 2002 Axis Communications AB
> Kernel command line: root=/dev/mtdblock3
> Enabling watchdog...
> Calibrating delay loop... 99.73 BogoMIPS
> Memory: 14600k/16384k available (1023k kernel code, 1784k 
> reserved, 420k
> data, 40k init)
> kmem_create: Forcing size word alignment - mm_struct
> kmem_create: Forcing size word alignment - filp
> Dentry cache hash table entries: 2048 (order: 1, 16384 
> bytes)Inode cache
> hash table entries: 1024 (order: 0, 8192 bytes)
> kmem_create: Forcing size word alignment - inode_cache
> Mount-cache hash table entries: 1024 (order: 0, 8192 bytes)
> kmem_create: Forcing size word alignment - bdev_cache
> kmem_create: Forcing size word alignment - cdev_cache
> Buffer-cache hash table entries: 2048 (order: 0, 8192 bytes)
> Page-cache hash table entries: 2048 (order: 0, 8192 bytes)
> POSIX conformance testing by UNIFIX
> Linux NET4.0 for Linux 2.4
> Based upon Swansea University Computer Society NET3.039
> kmem_create: Forcing size word alignment - sock
> Initializing RT netlink socket
> Starting kswapd
> kmem_create: Forcing size word alignment - file lock cache
> JFFS version 1.0, (C) 1999, 2000  Axis Communications AB
> kmem_create: Forcing size word alignment - jffs_node
> Bluetooth Driver v1.3, Copyright (c) 2000, 2001, 2002 Axis 
> Communications AB
> BT SYS: Bluetooth driver registered as ttyBT
> BT SYS: Bluetooth line discipline registered.
> BT SYS: Registering BT proc files
> Proc entry registered
> BT SYS: Bluetooth Driver Using ttyBT[0-6] (data), ttyBTC (ctrl [7])
> BNEP driver v0.1 (c) 2002 Axis Communications AB
> bnep0 initialized
> bnep1 initialized
> bnep2 initialized
> bnep3 initialized
> bnep4 initialized
> bnep5 initialized
> bnep6 initialized
> kmem_create: Forcing size word alignment - blkdev_requests
> PPP generic driver version 2.4.2
> PPP Deflate Compression module registered
> ETRAX 100LX 10/100MBit ethernet v2.0 (c) 2000-2001 Axis 
> Communications AB
> eth0 initialized
> eth0: changed MAC to 00:40:8C:CD:00:00
> ETRAX 100LX serial-driver 1.40 $, (c) 2000-2002 Axis Communications AB
> ttyS0 at 0xb0000060 is a builtin UART with DMA
> ttyS2 at 0xb0000070 is a builtin UART with DMA
> ttyS3 at 0xb0000078 is a builtin UART with DMA
> fast_timer_init()
> cse0: Probing a 0x04000000 bytes large window at 0xe0000000.
> cse0: Probing for AMD compatible flash...
> cse0: Found 1 x 2MiB Fujitsu MBM29LV160TE at 0x0
> cse1: Probing a 0x04000000 bytes large window at 0xe4000000.
> cse1: Probing for AMD compatible flash...
> cse1: Found 1 x 2MiB Fujitsu MBM29LV160TE at 0x0
> Concatenating MTD devices:
> (0): "cse0"
> (1): "cse1"
> into device "cse0+cse1"
> cse0+cse1: 0x00400000 bytes of flash memory.
>  Found a valid partition table at 0xf001000a-0xf0010056.
>   /dev/flash1 at 0x00010000, size 0x003a0000
>   /dev/flash2 at 0x003b0000, size 0x00050000
>  Adding readonly flash partition for romfs image:
>   /dev/flash3 at 0x000ae7dc, size 0x0014a000
> Creating 4 MTD partitions on "cse0+cse1":
> 0x00000000-0x00010000 : "part0"
> 0x00010000-0x003b0000 : "part1"
> 0x003b0000-0x00400000 : "part2"
> 0x000ae7dc-0x001f87dc : "romfs"
> GPIO port G: in_bits: 0x3FFF003F out_bits: 0x3E00FF3E val: 7DFF00C1
> GPIO port G: dir: 0000FF00 changeable: 01FFFF01
> ETRAX 100LX GPIO driver v2.5, (c) 2001, 2002 Axis Communications AB
> NET4: Linux TCP/IP 1.0 for NET4.0
> IP Protocols: ICMP, UDP, TCP, IGMP
> kmem_create: Forcing size word alignment - ip_dst_cache
> IP: routing cache hash table of 1024 buckets, 8Kbytes
> TCP: Hash tables configured (established 2048 bind 4096)
> ip_conntrack (128 buckets, 1024 max)
> ip_tables: (C) 2000-2002 Netfilter core team
> NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
> IPv6 v0.8 for NET4.0
> kmem_create: Forcing size word alignment - ip6_dst_cache
> IPv6 over IPv4 tunneling driver
> ip6_tables: (C) 2000-2002 Netfilter core team
> NET4: Ethernet Bridge 008 for NET4.0
> VFS: Mounted root (cramfs filesystem) readonly.
> Freeing unused kernel memory: 40k freed
> Kernel panic: No init found.  Try passing init= option to kernel.
>  Kernel panic: No init found.  Try passing init= option to kernel.
>  Kernel panic: No init found.  Try passing init= option to kernel.
> 
>  Kernel panic: No init found.  Try passing init= option to kernel.
>  Kernel panic: No init found.  Try passing init= option to kernel.
>  Kernel panic: No init found.  Try passing init= option to kernel.
>  Kernel panic: No init found.  Try passing init= option to kernel.
>  Kernel panic: No init found.  Try passing init= option to kernel.
> 
> 
> 
> regards,
> 
> -------------
> amine
> 
> 
> 
> 
> 
>