[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Axis Developer Board LX



Thank very much Mikael,
About general I/O, we would like to connect several LED and buttons (We 
are using the two serial port but not the RS422/485 port. And, we don't 
want the push button S3,S14). Also, is it possible to manage the status 
LED V6 ?

Mikael Starvik a écrit:
> 16907 is for devboard LX while 19227 is for devboard 82. In your
> case you have a devboard lx so 16907 is the correct file.
> 
> /Mikael
> 
> -----Original Message-----
> From: Frossard Philippe [mailto:p.frossard@xxxxxxx.ch] 
> Sent: Monday, June 07, 2004 2:36 PM
> To: Mikael Starvik
> Cc: dev-etrax
> Subject: Re: Axis Developer Board LX
> 
> 
> Hi,
> 
> My board number : 19790 R1
> I have two schematics :
> 1 : 16907R2.sch-8     - Tue Nov 14 10:16:06 2000
> 2 : 19227R2_sch.sch-1 - Tue Nov 12 10:08:15 2002
> 
> Which one can I use ? (I think you have different board revision !)
> I would like to have the right schematic for my board !
> Thanks,
> 
> Mikael Starvik a écrit:
> 
>>Hi,
>>
>>Every component, document etc at Axis has a unique number. 19790 is the
>>number 
>>for the physical PCB. 16970 is the number for the Schematics (i.e. the
>>drawing)
>>while 16909 is the number of the drawing of the PCB.
>>
>>
>>
>>>We would like to use general IO ...
>>
>>
>>Ok. Most of the general I/O is available on the two connectors on the edge
>>of the PCB. Please send a more specific question if you need assistance
>>in finding a specific pin or similar.
>>
>>/Mikael
>>
>>
-- 
Philippe Frossard