[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: Compile errors building Etrax 82 tools



Title: Message
Nathan,
 
Thanks for offering your assistance.
 
You had it right.  I ended up re-building the box (redhat 7.3 with the stock kernel and tools) and the process is now underway.  I didn't like some of the errors I've seen during the compilation process, but with such a complex system and different levels of tools, it's understandable.
 
Following this I need to figure out how to get the kernel and then the rest of the O/S to the 82 board.  I'm at a loss, so if you have any ideas???  Unless the ./install process takes care of this, too?  (It's still running, so I don't know :) )
 
I might be missing something in the documentation that AXIS provides.  There's a gap between setting up the tools and building your first application.  Seems to me a step is missing as to how to re-flash the 82.
 
The board boots and has a 2.4.20 kernel on it, but I want to start out clean.
 
Mark Richards

 

-----Original Message-----
From: owner-dev-etrax@xxxxxxx.com] On Behalf Of Nathan.Smith@xxxxxxx.gov
Sent: Friday, July 02, 2004 10:14
To: Mark Richards
Cc: dev-etrax@xxxxxxx.com
Subject: Re: Compile errors building Etrax 82 tools

I have some tips, take them at your own risk, I have limited experience

and these are just based on my observations. First tip, create an

axis.sh file the same as init_env and add it to /etc/profile.d/ and

change profile.d to run the axis.sh script. That way you can be sure

each new bash you start has those variable set, whether it be root or a

normal user.



My second tip is: upgrade. When your kernel is older than the one your

trying to cross-compile, to me that seems a little odd. So your gcc,

rpm, and other things are probably all old.



Third: try not to be root when you do this stuff. Unless you have too

(when install rpm). And then, you might want to chown user:user -R dir/ .



Details about my own experience getting the SDK going: You seem to have

a better grip on things than I do, but I did have a little bit of

trouble when I was using the devboard_82_R1-92 package. I did the kernel

patch like you did, etc. The patch seemed to upload to the box just fine

as well. I had issues when I was doing make install and make files after

doing the demo "Hello World" program. Sometimes it seemed to randomly

crap out after I don't remember having made any changes. After that

happened and I re-followed the SDK install, I began to make tar backups

of my axis directory.



----- Original Message -----

From: "Mark Richards" <mark.richards@xxxxxxx.com>

Date: Thursday, July 1, 2004 8:15 pm

Subject: Compile errors building Etrax 82 tools



> I am evaluating an AXIS 82 board as a platform for our application.

> Actually, a new board will be developed using the ETRAX.

>

> I have the CRIS tools installed and see that init_env takes care of

> settingup the path for it, etc.

>

> I also untar'd the 2.4.26 kernel. I have a fresh copy from

> kernel.org that

> is on CD and that I use whenever building.

>

> The RPM put CRIS wherever it is supposed to go with no errors. I

> put the

> devboard_82-R1_92.tar.gz in my /home/dev/ directory and unzipped it

> there.

> I did . ./init_env without a problem and checked the SET list to make

> certain

>

> I ran ./install and pointed to the os/linux-2.4.26.

>

> The patches seemed to go off fine...

>

> I then told it to go ahead and build. Here's where things went

> bad... Some

> of the errors seem fundamentally wrong...

>

> Do you want to build the software now (default y)? y

> *** Building software

> make tools

> make[1]: Entering directory `/home/dev/axis/devboard_82'

> make -C tools/build install

> make[2]: Entering directory `/home/dev/axis/devboard_82/tools/build'

> make -C ccdv install

> BINDIR="/home/dev/axis/devboard_82/tools/build/bin"make[3]:

> Entering directory `/home/dev/axis/devboard_82/tools/build/ccdv'

> gcc -Wall -Wshadow -I/home/dev/axis/devboard_82/target/host/include

> -O0 -g

> -fno-omit-frame-pointer -

> L/home/dev/axis/devboard_82/target/host/lib ccdv.c

> -o ccdv

> install -p -d /home/dev/axis/devboard_82/tools/build/bin

> install -p -m 0755 ccdv @ccdv

> /home/dev/axis/devboard_82/tools/build/binmake[3]: Leaving

> directory `/home/dev/axis/devboard_82/tools/build/ccdv'

> make -C scripts install

> BINDIR="/home/dev/axis/devboard_82/tools/build/bin"make[3]:

> Entering directory `/home/dev/axis/devboard_82/tools/build/scripts'

>

> install -p -d /home/dev/axis/devboard_82/tools/build/bin

> install -p -m 0755 arpping axls.pl axrequires boot_argus boot_elinux

> boot_linux buildsrc compiler-version convertcomments.pl cris-sym-tab

> cvs_diff cvs2cl.pl diff_prodspec find-needed-shlibs.pl fix_cvsroot

> gcc_crisgenindex init_env_elinux.pl install_elinux ksymoops-cris

> meta_name2nbrmke2fs_elinux mkfdscript mknod_elinux mkprod mkptable

> mkswinfo multiflash

> optlibs padflashimage prodspec.pm prodspec2configure remotecmd

> strrpl.pl/home/dev/axis/devboard_82/tools/build/bin

> ln -sfn gcc_cris

> /home/dev/axis/devboard_82/tools/build/bin/arm_linux_gccmake[3]:

> Leaving directory `/home/dev/axis/devboard_82/tools/build/scripts'

> make -C axis_internal_scripts install

> BINDIR="/home/dev/axis/devboard_82/tools/build/bin"

> make[3]: Entering directory

> `/home/dev/axis/devboard_82/tools/build/axis_internal_scripts'

> install_elinux -p -d /home/dev/axis/devboard_82/tools/build/bin

> install_elinux -p -m 0755 axis2sf cvsget.cgi jasm juliette_regs.pl

> sf2axisTGasm.pl /home/dev/axis/devboard_82/tools/build/bin

> make[3]: Leaving directory

> `/home/dev/axis/devboard_82/tools/build/axis_internal_scripts'

> make -C genromfs install

> BINDIR="/home/dev/axis/devboard_82/tools/build/bin"

> make[3]: Entering directory

> `/home/dev/axis/devboard_82/tools/build/genromfs'

> gcc -Wall -Wshadow -I/home/dev/axis/devboard_82/target/host/include

> -O0 -g

> -fno-omit-frame-pointer -c -o genromfs.o genromfs.c

> genromfs.c: In function `processdir':

> genromfs.c:690: warning: declaration of `dirfd' shadows global

> declarationgenromfs.c:692: warning: declaration of `link' shadows

> global declaration

> genromfs.c: In function `main':

> genromfs.c:839: warning: implicit declaration of function `time'

> genromfs.c:839: warning: long unsigned int format, unsigned int arg

> (arg 3)

> gcc -L/home/dev/axis/devboard_82/target/host/lib genromfs.o -o

> genromfs_elinux install_elinux -p -d

> /home/dev/axis/devboard_82/tools/build/bin

> install_elinux -p -m 0755 genromfs_elinux

> /home/dev/axis/devboard_82/tools/build/bin

> make[3]: Leaving directory

> `/home/dev/axis/devboard_82/tools/build/genromfs'

> make -C imgsum install

> BINDIR="/home/dev/axis/devboard_82/tools/build/bin"make[3]:

> Entering directory `/home/dev/axis/devboard_82/tools/build/imgsum'

> gcc -Wall -Wshadow -I/home/dev/axis/devboard_82/target/host/include

> -O0 -g

> -fno-omit-frame-pointer -L/home/dev/axis/devboard_82/target/host/lib

> imgsum.c -o imgsum

> install_elinux -p -d /home/dev/axis/devboard_82/tools/build/bin

> install_elinux -p -m 0755 imgsum

> /home/dev/axis/devboard_82/tools/build/binmake[3]: Leaving

> directory `/home/dev/axis/devboard_82/tools/build/imgsum'

> make -C mkcramfs install

> BINDIR="/home/dev/axis/devboard_82/tools/build/bin"

> make[3]: Entering directory

> `/home/dev/axis/devboard_82/tools/build/mkcramfs'

> gcc -Wall -Wshadow -I/home/dev/axis/devboard_82/target/host/include

> -O0 -g

> -fno-omit-frame-pointer -I. -

> L/home/dev/axis/devboard_82/target/host/libmkcramfs.c -lz -o

> mkcramfs gcc -Wall -Wshadow

> -I/home/dev/axis/devboard_82/target/host/include -O0 -g

> -fno-omit-frame-pointer -I. -

> L/home/dev/axis/devboard_82/target/host/libcramfsck.c -lz -o

> cramfsck In file included from /usr/include/linux/fs.h:12,

>

> from cramfsck.c:56:

> /usr/include/linux/wait.h:4: warning: `WNOHANG' redefined

> /usr/include/bits/waitflags.h:26: warning: this is the location of the

> previous definition

> /usr/include/linux/wait.h:5: warning: `WUNTRACED' redefined

> /usr/include/bits/waitflags.h:27: warning: this is the location of the

> previous definition

> cramfsck.c: In function `usage':

> cramfsck.c:110: warning: declaration of `stream' shadows global

> declarationcramfsck.c: At top level:

> cramfsck.c:376: warning: declaration of `fd' shadows global

> declarationcramfsck.c: In function `do_uncompress':

> cramfsck.c:377: warning: declaration of `fd' shadows global

> declarationcramfsck.c: In function `do_file':

> cramfsck.c:510: warning: declaration of `fd' shadows global

> declarationinstall_elinux -p -d

> /home/dev/axis/devboard_82/tools/build/bininstall_elinux -p -m 0755

> mkcramfs cramfsck

> /home/dev/axis/devboard_82/tools/build/bin

> make[3]: Leaving directory

> `/home/dev/axis/devboard_82/tools/build/mkcramfs'

> make -C mkfs.jffs install

> BINDIR="/home/dev/axis/devboard_82/tools/build/bin"

> make[3]: Entering directory

> `/home/dev/axis/devboard_82/tools/build/mkfs.jffs'

> gcc -Wall -Wshadow -I/home/dev/axis/devboard_82/target/host/include

> -O0 -g

> -fno-omit-frame-pointer -L/home/dev/axis/devboard_82/target/host/lib

> mkfs.jffs.c -o mkfs.jffs

> mkfs.jffs.c: In function `write_file':

> mkfs.jffs.c:230: warning: unused variable `size'

> install_elinux -p -d /home/dev/axis/devboard_82/tools/build/bin

> install_elinux -p -m 0755 mkfs.jffs

> /home/dev/axis/devboard_82/tools/build/bin

> make[3]: Leaving directory

> `/home/dev/axis/devboard_82/tools/build/mkfs.jffs'

> make -C mkfs.jffs2 install

> BINDIR="/home/dev/axis/devboard_82/tools/build/bin"

> make[3]: Entering directory

> `/home/dev/axis/devboard_82/tools/build/mkfs.jffs2'

> cc -I. -O2 -Wall -c -o crc32.o crc32.c

> gcc: No input files

> make[3]: *** [crc32.o] Error 1

> make[3]: Leaving directory

> `/home/dev/axis/devboard_82/tools/build/mkfs.jffs2'

> make[2]: *** [mkfs.jffs2] Error 2

> make[2]: Leaving directory `/home/dev/axis/devboard_82/tools/build'

> make[1]: *** [tools] Error 2

> make[1]: Leaving directory `/home/dev/axis/devboard_82'

> make: *** [everything] Error 2

>

>

> What seems strange is that the stock GCC is invoked as the

> compiler.  Maybe

> there's something wrong with the environment.  Shouldn't the CRIS-

> GCC be

> invoked?

>

> I checked everything I could think of. The only issue I found was

> that in

> the Makefile, the statement:

>

> PATH := $(PATH):/usr/local/cris/r56

>

> is set. However the r56 directory does not exist under cris. The ls

> of cris

> is:

>

> The path is:

>

PATH=/home/dev/axis/devboard_82/tools/build/bin:/home/dev/axis/devboard_82/t

> ools

>

/build/bin:/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin:/usr

> /X11

> R6/bin:/root/bin:/usr/local/cris:/usr/local/cris

>

> which puts the /usr/local/cris at the end of the parsed path.  Even

> thisdoesn't point to bin, which is another level down.  Also

> there's no link

> file to gcc in the cris directory (or bin) to replace the cris

> compiler with

> gcc.

>

> I'm building on a Linux 7.2 box with a 2.4.7-10 kernel.

>

> Maybe the RPM install of CRIS didn't work (although it indicated

> success) or

> perhaps I should do a binary build?  I'm beginning to suspect this

> is at

> least part of the problem.

>

> Anyone have any suggestions?

>

>

>