[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: BUSCLK



BUSCLK is not intended to clock peripherals. If you need a clock for
e.g. a FPGA you should clock it separately and use handshaking or
similar between the CPU and the FPGA. For simple peripherals
it is enough to get a chip select and a read/write strobe.

Regards
/Mikael

-----Original Message-----
From: owner-dev-etrax@xxxxxxx.com">mailto:owner-dev-etrax@xxxxxxx.com] On
Behalf Of Martin Fake
Sent: Sunday, August 22, 2004 2:10 PM
To: dev-etrax
Subject: BUSCLK


     Hello,
         I need a clock signal for peripherals. I have seen a BUSCLK
(C15)
pin in BUS signals group. But I have not found enough information about
this
pin. Is it a clock output for peripherals or for only test signal ?

Martin