[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: eCos on Cris

> From: owner-dev-etrax@xxxxxxx.com 
> [mailto:owner-dev-etrax@xxxxxxx.com] On Behalf Of Simon Posnjak
> Sent: den 14 september 2004 22:27
> V tor, 14.09.2004 ob 20:12 je Henrik Eriksson napisal(a):
> > Btw, the generic HAL for CRIS is not configured for any specific
> > hardware; it basically just pulls in the default values from the
> > register header files for all registers.  You will need to set
> > it up for the hardware you are using to get eCos to boot.  I can
> > provide you with the template for the devboard if you need it.
> Yes, please. I would be very grateful. Thank you. (I have devboard 82)

Ok.  Append the CDL data in the attached file to whatever template
you are using.  The setup is for devboard 82.


Attachment: hardware.ect.bz2
Description: hardware.ect.bz2