Mail Thread Index
- Re: garbage collect,
David Woodhouse
- Re: garbage collect,
Nkkkkkkk.ru>
- <Possible follow-ups>
- Re: garbage collect,
Jason Gunthorpe
- Re: garbage collect,
Bjorn Wesen
- Re: garbage collect,
Jason Gunthorpe
- Re: garbage collect,
Bjorn Wesen
- Re: garbage collect,
Jason Gunthorpe
- Re: garbage collect,
David Woodhouse
- Re: garbage collect,
Bjorn Wesen
- Re: garbage collect,
Jason Gunthorpe
- Re: garbage collect,
Bjorn Wesen
- Re: garbage collect,
Jason Gunthorpe
- Re: garbage collect,
David Woodhouse
- Re: garbage collect,
Jason Gunthorpe
- Re: garbage collect,
David Woodhouse
- Re: garbage collect,
Nkkkkkkk.org>
- Re: garbage collect,
David Woodhouse
- Re: garbage collect,
Nkkkkkkk.org>
- Re: garbage collect,
David Woodhouse
- Re: mtdblock interface,
Nkkkkkkk.org>
- Re: garbage collect,
Nkkkkkkk.ru>
- Re: garbage collect,
Alan Cox
- Re: garbage collect,
David Woodhouse
- Re: garbage collect,
Bjorn Wesen
- Re: garbage collect,
Jason Gunthorpe
- Re: garbage collect,
Bjorn Wesen
- Re: garbage collect,
Johan Adolfsson
- Device problems in JFFS.,
David Woodhouse
- JFFS undelete/undo feature?,
Johan Adolfsson
- Re: Bug in JFFS,
Jason Gunthorpe
- syncronous mode,
Nkkkkkkk.ru>
- Re: file-finder : was(Re: JFFS - ready for submission into 2.[34]?),
Sébastien Côté
- Ethernet connection,
Peter Fredriksson
- [PATCH]: The file 'os/elinux/fs/jffs/jffs_fm.c' has been modified.(fwd),
Simon Kagstrom
- Reconstructing a file,
Sébastien Côté
- Using MTD + cfi_probe with RPXLite ?,
Arnold Christensen
- Additional information....Re: Using MTD + cfi_probe withRPXLite ?,
Arnold Christensen
- FOUND IT + how to fix, Was: Using MTD + cfi_probe withRPXLite ?,
Arnold Christensen
- jffs_erasable_size: offset = 0x0034b000,
David Woodhouse
- Re: jffs_erasable_size: offset = 0x0034b000,
David Woodhouse
- Re: jffs_erasable_size: offset = 0x0034b000,
Nkkkkkkk.ru>
- Re: jffs_erasable_size: offset = 0x0034b000,
Sébastien Côté
- Re: jffs_erasable_size: offset = 0x0034b000,
Bjorn Wesen
- Re: jffs_erasable_size: offset = 0x0034b000,
Sébastien Côté
- Re: jffs_erasable_size: offset = 0x0034b000,
David Woodhouse
- Re: jffs_erasable_size: offset = 0x0034b000,
Bjorn Wesen
- Re: jffs_erasable_size: offset = 0x0034b000,
David Woodhouse
- Re: jffs_erasable_size: offset = 0x0034b000,
Alexander Larsson
- Re: jffs_erasable_size: offset = 0x0034b000,
Sébastien Côté
- Re: jffs_erasable_size: offset = 0x0034b000,
Simon Kagstrom
- Re: jffs_erasable_size: offset = 0x0034b000,
David Woodhouse
- Re: jffs_erasable_size: offset = 0x0034b000,
Simon Kagstrom
- Re: jffs_erasable_size: offset = 0x0034b000,
David Woodhouse
- Re: jffs_erasable_size: offset = 0x0034b000,
Nkkkkkkk.ru>
- Re: jffs_erasable_size: offset = 0x0034b000,
David Woodhouse
- Re: jffs_erasable_size: offset = 0x0034b000,
Philipp Rumpf
- Re: jffs_erasable_size: offset = 0x0034b000,
David Woodhouse
- Re: jffs_erasable_size: offset = 0x0034b000,
Sébastien Côté
- Re: jffs_erasable_size: offset = 0x0034b000,
Bjorn Wesen
- jffs,nand flash,block device,
=?big5?B?tL+sTKn6?=
- max_chunk_size,
Nkkkkkkk.ru>
- [PATCH] The file 'os/elinux/fs/jffs/inode.c' has been modified.(fwd),
Simon Kagstrom
- FTP chmod,
Jean-Yves Mignolet
- Buffering the data bus,
Andrew Baker
- Btd and ttyBT0,
Joakim Ceder
- Gdb-cris build-related problem,
Orjan Friberg
- Developer Board Software Release 1.0.1,
Jonas Holmberg
- inittab, btd and ppp,
Peter Fredriksson
- serial connection on etrax 100,
Peter Fredriksson
- RE: Problem with developer board,
Jonas Holmberg
- newbie,
Frank
- Serial problems,
Peter Fredriksson
- printing float,
Jonas Holmberg
- sftpd,
Jonas Holmberg
- Questions on the E-trax dev board.,
sridhar
- DRAM,
Andrew Baker
- <Possible follow-ups>
- RE: DRAM,
Bo Gabrielsson
- Unable to Ping new dev board after arp,
Logan Harris
- developer.axis.com update,
Markus Lavin
- boot problems,
Stijn Decneut
- Application available: elivis-tiny,
Jonas Holmberg
- Source code for editcgi.cgi?,
Logan Harris
- NTP Server,
=?iso-8859-1?Q?"Fran=E7ois_RAYNkkkkkkk.fr>
- NTP,
Nkkkkkkk.fr>
- Memory and wiring,
David Pettersson
- shared memory,
Nkkkkkkk.at>
- tcgetattr,
Nkkkkkkk.at>
- C programs on 2100,
Paul J. Lucas
- ETRAX and Embeddix Linux,
=?iso-8859-1?Q?"Fran=E7ois_RAYNkkkkkkk.fr>
- ASH strangeness,
Evaldas Darcianovas
- Developer board contest,
Nkkkkkkk.com>
- Connecting harddisk,
David Pettersson
- AXIS 2100 Firmware,
Apichat Churat
- genromfs_elinux?,
Á¶ÁÖż¬
- From intec techonology LAB,
yoo jae-hyuck
- loading info on developer board,
Chalon Clemons
- Developer Board Software Release 1.0.2,
Jonas Holmberg
- reg ifconfig and route on etrax-uclinux,
Prabhat Avasare
- reg stack size on etrax-uclinux,
Prabhat Avasare
- how to debug kernel on etrax-uclinux,
Prabhat Avasare
- Watchdog,
Nkkkkkkk.at>
- kernel level debugging on etrax-uclinux,
Prabhat Avasare
- Problems with C++ Standard String class,
Praxmarer Robert
- Second network interface,
Mikael Starvik
- reg remote debugging with gdb,
Prabhat Avasare
- how to debug with gdb-cris,
Prabhat Avasare
- Casing,
David Pettersson
- FIFO,
Justin Flik
- Interrupt handling,
Stijn Decneut
- RE: Is cris also c++ compiler?,
Jonas Holmberg
- pppd,
Gorazd Golob
- <Possible follow-ups>
- PPPD,
Ashutosh Verma
- missing timer interrupt,
Prabhat Avasare
- Reboot,
Nkkkkkkk.at>
- Developing an Etrax100 board,
Joe
- New documentation section on developer.axis.com!,
Jonas Holmberg
- system V interprocess communication (ipc) ?,
afelson
- Parallel Printer Port is not working,
Kim, Hyojun
- RST bit number for DS1302,
Prabhat Avasare
- ETRAX 100LX Programmer's Manual and on-line ordering of ETRAX 100 available,
Nkkkkkkk.com>
- Developer board project pages,
Nkkkkkkk.com>
- update,
Nkkkkkkk.at>
- Re: problem with boot_elinux,
Johan Adolfsson
- pppd, insmod,
Alexander Gordon (QIC)
- pppd II,
Gorazd Golob
- Adding users and changing passwords,
Johann Dantant
- SNMP agent availability on elinux,
Abhishek Thakur
- POSIX Thread Library Available ?,
Jin-Yong Song
- Multiple mails to dev-etrax,
Fred Jonsson
- Where are the GPIO pins on the dev-board?,
Johan Magnusson (QIC)
- GPIO works but how do we configure other pins like the ones on ser3 for GP-use?,
Johan Magnusson (QIC)
- problem with fmod(),
Prabhat Avasare
- RE: GPIO works but how do we configure other pins like the ones o n ser3 for GP-use?,
Jonas Holmberg
- How do we write to registers?,
Johan Magnusson (QIC)
- Memory lost ?,
Johann Dantant
- Can you use the I2C bus on the developers board?,
Jonas Aaberg
- No Subject,
asdkasld
- Boot from serial port?,
=?ks_c_5601-1987?B?UmFuZHkgTGVlXCjAzMO1uLhcKQ==?=
- Module vs Elinux !,
Daniel Sandström
- Fw: BOA HTTPD server config file,
Johann Dantant
- SMBus and I2C,
Jonas Aaberg
- simple question about compilation,
Abhishek Thakur
- Zlib,
Jonas Aaberg
- SED1520 driver?,
Jonas Aaberg
- Problems using I/O-pins on par0,
Stefan Weilhartner
- Connect daughterboard,
Alexander Gordon (QIC)
- COM PORT,
Alexander Gordon (QIC)
- Re: [bluetooth-dev] COM PORT,
johana
- LPT-port,
Henrik Löfgren
- ktest and boot_elinux problem,
Serge Sozonoff
- 485 serial port read delay and send/receive turnaround,
afelson
- Secondary Adress ?,
Daniel Sandström
- Problems with serial port communication (voltage level of serial port),
Cubic
- Announcement - Developer Board with ETRAX 100LX,
Bo Gabrielsson
- FATAL FLASH ERROR (1),
Nkkkkkkk.at>
- LPT2 problems,
Jonas Aaberg
- SNMP,
Johann Dantant
- New compiler tools release: cris-dist-1.11,
Hans-Peter Nkkkkkkk.com>
- direction for g21-23,
Anders Blomdell
- Interrupts disabled,
Anders Blomdell
- Has anyone tried SPI with ETRAX100 ?,
Abhishek Thakur
- Integration problems,
Praxmarer Robert
- read,
Nkkkkkkk.at>
- Using par0 for I/O and building a new kernel/image,
Stefan Weilhartner
- Header file problems,
Praxmarer Robert
- CRIS linking problems,
Timo.Sakari
- Linking problems,
Praxmarer Robert
- Executing problems,
Praxmarer Robert
- problems with large values of doubles,
Prabhat Avasare
- Data pins and other pins on the LPT2,
Jonas Aaberg
- network problem,
Jooyeon Cho
- problems with use of new compiler cris-1.11,
Prabhat Avasare
- I2C interface,
Jonas Aaberg
- Axis linking problems (again),
Timo.Sakari
- Driving LED's with /dev/lp0,
Stefan Weilhartner
- New chapters for ETRAX 100LX Designer's Reference available,
Nkkkkkkk.com>
- External DMA,
=?ks_c_5601-1987?B?UmFuZHkgTGVlXCjAzMO1uLhcKQ==?=
- RE: please help me wirh this TCP/IP problem,
Jonas Holmberg
- Possible timing problems,
Jonas Aaberg
- Math functions?,
Jyrki Petsalo
- e2fsck utility for etrax elinux platform,
=?ks_c_5601-1987?B?UmFuZHkgTGVlXCjAzMO1uLhcKQ==?=
- FATAL ERROR on devboard with CRIS 1.11,
Johann Dantant
- RE: BOUNCE dev-etrax@xxxxxxx.se,
Jonas Holmberg
- fatal flash error(1),
Stefano Vicenzetto
- insmod ?? Anyone get it to work on ETRAX Dev board trying IP Masq and PPP,
ljackson
- Decoupling,
Magnus Mĺrtensson
- How do I disable the debug ser port?,
matthew.hook
- ETRAX100LX Development Board Software...,
tstephens
- ualarm ?,
matthew.hook
- MAC address in hardware?,
Jonas Aaberg
- Kernel image in jffs?,
Jonas Aaberg
- COM2 output,
Nkkkkkkk.at>
- Install stack on Devboard,
Alexander Gordon (QIC)
- RE: insmod ?? Anyone get it to work on ETRAX Dev board trying I P Masq andPPP,
ljackson
- High resolution timing,
matthew.hook
- RE: insmod ?? Anyone get it to work on ETRAX Dev board trying I P Masq and PPP,
Jonas Holmberg
- Connecting IO to the devel boards,
Bart Duchesne
- Trouble flashing the development board,
matthew.hook
- What steps should I take to building a new kernel?,
matthew.hook
- fork and vfork and daemon processes,
matthew.hook
- Multiple IP Addresses,
Marcelo Gomes de Souza
- problem in making image.romfs with genromfs_elinux,
Prabhat Avasare
- 2.4 Kernel Status?,
matthew.hook
- JFFS erase error,
Jonas Aaberg
- Sorry!,
Jonas Aaberg
- Backround process, fork & vfork, synchronization methods?,
Timo.Sakari
- <Possible follow-ups>
- RE: Backround process, fork & vfork, synchronization methods?,
Timo.Sakari
- RE: Backround process, fork & vfork, synchronization methods?,
Timo.Sakari
- RE: Backround process, fork & vfork, synchronization methods?,
Timo.Sakari
- RE: Backround process, fork & vfork, synchronization methods?,
Timo.Sakari
- RE: Backround process, fork & vfork, synchronization methods?,
Timo.Sakari
- Power supply,
Anders Blomdell
- JFFS trouble on new board,
Johann Dantant
- jffs_write_node errors,
Prabhat Avasare
- Question about the rescue code,
Jonas Aaberg
- USB Host or Slave?,
Simon
- ser3 as GP I/0,
Alexander Gordon (QIC)
- Parallell port timing,
Anders Blomdell
- 2.4 Kernel Makefile,
matthew.hook
- Oh and here is my current makefile for 2.4 linux,
matthew.hook
- Another compiling 2.4.2 kernel,
matthew.hook
- Yellow LED and Network.conf,
=?EUC-KR?B?wMy6uMjx?=
- Whole ETRAX 100LX Designer's Reference available?,
Simon
- Reloading the kernel,
Anders Blomdell
- trouble flashing my development board,
=?EUC-KR?B?wMy6uMjx?=
- pty.h missing?,
Patrick O. Murphy
- wireless LAN ?,
Henry Minsky
- Connecting more than one flash memory to the Etrax.,
Jonas Aaberg
- ATA + SyncSer + USB?,
Jyrki Petsalo
- SDRAM+ Flash memory over 64Mb,
Simon
- flash > 2MB,
Adam Felson
- Schematic and PCB,
Marcelo Gomes de Souza
- Buttons and Schmitt triggers,
Jonas Aaberg
- full directory information in prodspec,
=?EUC-KR?B?wMy6uMjx?=
- No file "math.h",
Sookniran Hoyingjarearn
- Journaling File System,
=?ks_c_5601-1987?B?UmFuZHkgTGVlXCjAzMO1uLhcKQ==?=
- Pins needed for serial boot?,
Jonas Aaberg
- Two SDRAM memories,
Jonas Aaberg
- Developer Board LX Software released,
Jonas Holmberg
- glibc,
matthew.hook
- Re: glibc,
Hans-Peter Nkkkkkkk.com>
- <Possible follow-ups>
- glibc,
Jonas Holmberg
- glibc,
Uwe Reimann
- IPTABLES ?,
ljackson
- makefile & include problems,
matthew.hook
- STL,
matthew.hook
- Connect with character LCD,
=?EUC-KR?B?wMy6uMjx?=
- RE: Reading data from parallel port,
Mikael Starvik
- mount /dev/flash2 problems,
Patrick O. Murphy
- gdb-cris?,
Patrick O. Murphy
- Etrax100LX vs. Etrax100,
=?ks_c_5601-1987?B?UmFuZHkgTGVlXCjAzMO1uLhcKQ==?=
- C library problem,
Dragan Stancevic
- weirdness with cris 1.11 compiler,
Adam Felson
- GDB for Developer Board LX released,
Orjan Friberg
- can't build lx developers tools,
Adam Felson
- Has anyone successfully compiled and installed IPTABLES?,
ljackson
- C++ compilation problem,
matthew.hook
- C++ linking problems,
matthew.hook
- Any sites or webring out there for ETRAX?,
Simon
- Problem compiling C++ with latest devboard & compiler,
matthew.hook
- Anyone using IrDA with the ETRAX devboard?,
Hampus Häggström
- Re: Has anyone successfully compiled and installed IPTABLES? ipchains: l: Syntaxerror: "(" unexpected,
ljackson
- turning off debug on com2?,
Patrick O. Murphy
- compiling and linking problems,
mschapira
- objcopy problem.,
=?ks_c_5601-1987?B?UmFuZHkgTGVlXCjAzMO1uLhcKQ==?=
- Axcessing *R_PAR1_CTRL_DATA from programs under Linux.,
Jonas Aaberg
insmod and Etrax 100LX,
Jonas Aaberg
nfs mounts,
Mark Schapira
samba+USB,
Dragan Stancevic
Compiling kernel modules,
Jonas Aaberg
Already 'APE Portable Environment' ported?,
Ortega, Artur
Installation DEV LX software,
Nkkkkkkk.se>
To make insmod work requires some work,
Jonas Aaberg
NFS Client,
briann
problem with fprintf(),
Prabhat Avasare
problem with 2.4 kernel and debug port,
matthew.hook
Cannot execute file in DEVB,
Nkkkkkkk.se>
RS485 9-bit networking,
Bart Duchesne
RE:,
Jonas Holmberg
Header file errors.,
Mark Schapira
undefined reference to `__pure_virtual' ?,
matthew.hook
2.4 kernel performance?,
matthew.hook
System V IPC on LX,
David Andersson
memory disappears and never returns,
Adam Felson
interesting bug,
matthew.hook
RAM and Flash extension,
Vincent Lenders
Problems compiling ppp for linux-2.4,
Hampus Häggström
compilation error at: How to write and build applications,
Vincent Lenders
image not flashing properly,
matthew.hook
Assembler compiler errors,
mark.hudson
kernel modules?,
matthew.hook
Interrupt driver serial IO,
Bart Duchesne
IRQ problem?,
ygpark
Two bugs in *scanf ?,
Sebastian Andersson
core files?,
Adam Felson
command line editing w/ the new 2.4 kernel,
Adam Felson
ETRAX100LX CACHE/MMU Interaction...,
tstephens
init 6 ?,
Sebastian Andersson
bypassing the MMU on the lx chip,
Adam Felson
Re: ETRAX100LX CACHE/MMU Interaction...,
tstephens
tar crashes while unpacking .var.tar,
Sebastian Andersson
interfacing 3.3v logic with 5v logic,
Bart Duchesne
Problems with Red Hat Linux 7.1,
Gould, Andrew
Why waiting on the parport?,
Jonas Aaberg
Debug messages on ser1,
Bart Duchesne
Socket programming with cLinux,
Nkkkkkkk.se>
RE: init 6 ?, RE: watchdog,
Jonas Holmberg
memory leaks when writing to a file,
Mark Schapira
using pthreads on the LX development board,
Ujwal Sathyam
elinux on LX devboard,
Hampus Häggström
Writing in flash from bootloader,
Jonas Aaberg
Developer Board LX and USB,
Magnus Mĺrtensson
Where is for example s0bsy in the internal registers?,
Jonas Aaberg
IrDA support in linux-2.4.3 ?,
Hampus Häggström
memory leaks when writing to a file in /mnt/flash,
Mark Schapira
FTP flash all doesn't work,
Nkkkkkkk.se>
Request for Configure.help texts for ETRAX config symbols.,
Steven Cole
Can't write in flash from boot loader!,
Jonas Aaberg
Example of resolv.conf,
Nkkkkkkk.se>
To Axis: plans of porting insmod?,
Jonas Aaberg
using __clone() system call on Etrax-LX with Linux 2.4.3,
Ujwal "S." Sathyam
problems with debug port,
matthew.hook
New version?,
Ujwal S . Sathyam
Recent replies to old messages,
Hans-Peter Nkkkkkkk.com>
Re: Problem on RedHat 7.1,
Simon
Unable to make 'hello' work on my Devboard,
Jean-Yves LUX
test,
Bart Duchesne
Re: ETRAX entries in Configure.help,
Bjorn Wesen
Flash upgrade on the board,
Vincent Lenders
Re: help with inline asm!!??,
Bjorn Wesen
About memory,
Yongtao Ye
SDRAM Design Guide,
Magnus Mĺrtensson
SDRAM with elinux ?,
Johann Dantant
memory leaks,
mschapira
pppd...,
Rafael Reinoso
Booting from the serial port,
Vincent Lenders
why is the symbol __errno not resolving from libm.a ?,
Henry Minsky
CGI-scripts for BOA under 2.4 kernel (LX-board),
Henrik Löfgren
how to restart the developer board from software,
Henry Minsky
Status LED,
Vincent Lenders
cannot open parallel port on 100LX board,
Henry Minsky
RE: Installation of Developer Board LX Software,
Jonas Holmberg
tar -xvf crashes,
Prabhat Avasare
Question from a newbie,
Rob Gaddi
ip-sysctl support and ip forwarding,
Daniel Ann
Shared libraries on Devboard LX,
Sampo Nkkkkkkk.net>
Interrupt latency question,
Robert D. Penny
Need SYSV IPC Supporto for MSG Queues,
Flavio Molinelli
Configuring sdram and serial ports,
Jarkko Tuomi
Problem settin Serial Asynch speed.. AND include/asm/serial.h missing??,
Flavio Molinelli
Accessing a UART on developer board,
Magnusson, Johan
ehternet boot with axis 2100,
Andrew Von Dollen
etrax100lx bogomips,
Jerome Lefranc
C++ compiling problems,
Jan-Peter Nkkkkkkk.com>
How long to start up,
Gregory Smith
Network connection,
Rob Gaddi
New compiler tools release: cris-dist-1.13,
Hans-Peter Nkkkkkkk.com>
Serial, DMA problem,
Petr Jerabek
devboard_lx 2.0.0 released,
Jonas Holmberg
problem with 'make xconfig' for devboard release 2_0_0,
Adam Felson
Problem building dev_etrax R2.0.0,
fmoli@mail.show.it
second flash bank,
Adam Felson
Include files?,
Ujwal S. Sathyam
How do I add to shared libs in image,
Ujwal S. Sathyam
image too big...,
Ujwal S. Sathyam
disable interupts,
Jan-Peter Nkkkkkkk.com>
Routing between ppp0 <-> eth0,
Marc Haase
Accessing 485 port,
Ujwal S. Sathyam
Kernel compile error with RS485,
Ujwal S. Sathyam
RE: Kernel compile error with RS485,
Jonas Holmberg
power pins abnormal!,
Ye Yongtao
ground pins floating on parallel port connector?,
Henry Minsky
device driver for new devboard_lx release,
Henry Minsky
parallel port driver in release 2_0_0 ?,
Henry Minsky
problems using localtime and gettimeofday,
mschapira
POSIX threads,
Andrew Von Dollen
Glibc update for cris-dist-1.13: cris-dist-glibc-1.13.1.tar.gz,
Hans-Peter Nkkkkkkk.com>
Compilation with devboard_lx 2.0.0,
root
Linux 2.4.5 & PPP...,
Rafael Reinoso
Second flash partition,
Adam Felson
Problems getting pppd to work over async devices,
Daniel Ann
Java ?,
Sebastian Andersson
Experiances adding a display?,
RCB
Bluetooth on Axis Devboard_LX,
Johnson Bao
Connecting AD-Converter to syncser0,
Claudius Moor
signal problem,
Jerome Lefranc
Silly question....,
RCB
RE: Silly question. Maybe not so silly?,
Jonas Holmberg
RE: .flashit problems,
Jonas Holmberg
Silly question solved.,
RCB
serial compile errors,
Dragan Stancevic
Re: Kernel module support.,
Sampo Nkkkkkkk.net>
Difference among CPU's,
Dragan Stancevic
Remotely Upgrading Dev Board,
Flavio Molinelli
Watchdog and RTC,
Henrik Löfgren
2490 Serial Server,
Henry Minsky
Ping does not work newbie,
=?ks_c_5601-1987?B?udq09rHZ?=
what happen when ifconfig is executed,
=?ks_c_5601-1987?B?udq09rHZ?=
SDRAM,
Petr Jerabek
setenv,
Peter Fredriksson
ARTPEC-1 compression chip,
Andrew Von Dollen
Compilation error development software arith.y:198,
=?ks_c_5601-1987?B?udq09rHZ?=
RE: devboard_lx2.0.0 kernel compilation error,
Jonas Holmberg
Update with FTP,
Park Duck Gun
Error: Remotely Upgrading Dev Board,
Nkkkkkkk.se>
RE: [bluetooth-dev] Making stack for Axis etrax lx board. newbie,
Marcus Jonsson
2100 reboot troubles,
Andrew Von Dollen
SDRAM modules,
Dragan Stancevic
flip buffer overrun!,
Magnusson, Johan
Rescue partition,
Dragan Stancevic
IDE,
Dragan Stancevic
- Re: IDE,
Jarkko Tuomi
- Re: IDE,
Dragan Stancevic
- Re: IDE,
Bjorn Wesen
- Re: IDE,
Dragan Stancevic
- Re: IDE,
Jarkko Tuomi
- Re: IDE,
Dragan Stancevic
- Re: IDE,
Bjorn Wesen
- Re: IDE,
Dragan Stancevic
- Re: IDE,
Dragan Stancevic
- Re: IDE,
Dragan Stancevic
- Re: IDE,
Bjorn Wesen
- Re: IDE,
Dragan Stancevic
- Re: IDE,
Bjorn Wesen
- Re: IDE,
Dragan Stancevic
- Re: IDE,
Bjorn Wesen
- Re: IDE,
Dragan Stancevic
- Message not available
- Re: IDE,
Dragan Stancevic
HTTP server question.,
Rafael Collantes
Problem with serial port,
Per-Ola Svensson
Re: HTTP server question (2),
matthew.hook
Program flash from serial connection?,
Ben Byer
addressing external memory,
Ben Byer
problem with serial driver,
Mariusz Matuszek
two ethernet,
Zbynek Drlik
General Purpose IO,
Marcus Jonsson
"Ethernet Tranceiver Out of Production?" Broadcom ethernet BCM5201 VS BCM5221,
Jakob Sandström
IDE - partially solved,
Jarkko Tuomi
error in devboard build-up,
Junedong Kim
Serial port handshake lines... (DTR),
Rafael Collantes
ATA Interface,
Chris
get image from devboard via ftp?,
Vladimir Bormotov
minimal feature EtraxLX100 board required,
Zoran Tomicic
Signal handler for SIGSEGV,
Nkkkkkkk.se>
Access to csp0,
Dragan Stancevic
Re: LX100,
Simon
Timer Interrupt,
Claudius Moor
Where is the chapter 19: Register definitions,
Nkkkkkkk.se>
Connect to 8 bus width?,
szlfc
New section on developer.axis.com: GUIs for GDB,
Orjan Friberg
New compiler tools release: cris-dist-1.14,
Hans-Peter Nkkkkkkk.com>
SSH,
Magnus Rosenquist
Problems 2nd Serial Port,
Magnus Rosenquist
Re:,
Ujwal S. Sathyam
Serial speed at etrax LX,
Peter Fredriksson
Necessary flash / ram size,
Pieter Grimmerink
non-prefixed symbols,
Marco Nkkkkkkk.ch>
Port speed,
Max Speransky
gethostbyname() problem,
=?ks_c_5601-1987?B?wMy47cjG?=
usleep seems broken,
Dragan Stancevic
DTR signal con serial ports ( COMs) ..... HowTO?,
Flavio Molinelli
HWTEST documentation ?,
Flavio Molinelli
Flash areas layout and size computation,
Flavio Molinelli
Access to R_PORT_PB_DATA,
Marco Nkkkkkkk.ch>
Devboard TCP performance,
Zoran Tomicic
R: External DMA,
Stefano Vicenzetto
Reset causes reset of RTC!,
Rafael Collantes
document error?,
szlfc
about document,
szlfc
Running on developer-board, OK! Running on camera2420, Failed!,
Zhao Lei
assembler compiling,
Petr Hanyk
=?gb2312?B?u9i4tKO6IFJF?=: Running on developer-board, OK! Running on camera2420, Failed!,
Zhao Lei
RE: ??: RE: Running on developer-board, OK! Running on camera2420, Failed!,
Jonas Holmberg
Errors in compiling devboard software,
Zhao Lei
Compact Flash,
Clive SIMMENkkkkkkk.com>
problem reading parallel port,
Thomas Hutterer
/lib/libucc.a not found,
Zhao Lei
User login from webpage using boa!,
Göran Hillebrink
Watchdog on ETRAX 100LX an devboard R_2_0_0,
Thomas Hutterer
Java news?,
Magnus Rosenquist
A universal pppd dialer?,
Peter Pang
interface?,
szlfc
PTZ camera drivers,
Shayne
New chapters in Designer's Reference published,
Nkkkkkkk.com>
how to port a thread-based app into Axis 2420?,
Zhao Lei
does elinux support the socket programming?,
Zhao Lei
R: ETRAX 100 EXT DMA,
Stefano Vicenzetto
ether and loadable module support,
Porlin Kang
Forking with Threads,
Greg Cannon
GDB Installation,
Greg Cannon
linux-2.4 and ethernet driver,
Porlin Kang
RE: Is flashrom died?,
Jonas Holmberg
IP masq. on etrax lx.,
Peter Fredriksson
Driver makes Linux crash,
Marco Nkkkkkkk.ch>
Parallel port,
ii.ss
Opinions about documentation,
Nkkkkkkk.com>
Downloading the executable into ETRAX-100,
Vilas Uchil
OS from flash?,
Marco Nkkkkkkk.ch>
Date and time,
Lukas
Problems with serial port,
Lukas
Problems when polling interrupt register,
Jonsson, Marcus
ppp-Connection,
Rafael Schwarze
porting "large" app,
RedHat
Problems in linking g++-objectfiles...,
Ortega, Artur
Porting Bluetooth Stack,
Vilas Uchil
chap parameter,
Rafael Schwarze
curses,
Szabo, Tamas
NAND Flash,
Petr Hanyk
head.S / make xconfig,
Marco Nkkkkkkk.ch>
zlib.h,
Szabo, Tamas
Silencing boot messages...,
Ujwal S. Sathyam
Serial port (again?),
Szabo, Tamas
RE: Serial port (next),
Szabo, Tamas
Serial port (correction) (see Serial port (again?),
Szabo, Tamas
serial port forever,
Szabo, Tamas
Serial port ;-),
Szabo, Tamas
porting app (again),
RedHat
RE: porting app with gnu configure,
Mikael Pahmp
SDRAM CONFIG help,
Magnus Mĺrtensson
flash file system lock up,
Peter Pang
serial port parity problem,
Lindberg, Magnus
ETRAX LX without Linux ???,
Marc Haase
How much flash?,
Ujwal S. Sathyam
JFFS question: Can I forcibly trigger a garbage collect?,
Ujwal S. Sathyam
Problem with install script,
Markus Roccaro
Memoryconfiguration,
Pijus Chanda
Dual-Ethernet,
Pijus Chanda
Connecting ATA-Drive,
Pijus Chanda
Bootblocktool and Rescue partition,
Henrik Löfgren
Interrupt driven serial driver,
Bart Duchesne
Serial communication,
Peter Fredriksson
New Kernel version,
Andy Preston
New chapters in ETRAX 100LX Designer's Reference,
Nkkkkkkk.com>
New compiler tools release: cris-dist-1.15,
Hans-Peter Nkkkkkkk.com>
ash on MMU-less systems,
Stefan Soucek
Parallel Port Driver with DMA,
Greg Cannon
DMA Channel Sharing,
Greg Cannon
Serial-break handling status?,
Sebastian Andersson
thread with SIGSEGV,
Jerome Lefranc
16M SDRAM & 32M SDRAM,
Jihoon Bang
Kaffe JVM for Etrax/CRIS,
Mikael Pahmp
2.4.10 Kernel,
Andy Preston
Additional interfaces,
Andy Preston
Axis 2191 audio module with developer board,
Vincent Lenders
Disabling debug-port affects flashing ofer serial port?,
Ortega, Artur
PortA Interrupt Handling,
Greg Cannon
devboard_lx as dialin server using mgetty,
joost
IDE on devboard_lx,
Szabo, Tamas
Connecting HDD to devboard,
Szabo, Tamas
translate automake/autoconf makefile to cris,
Pieter Grimmerink
pthreads and etrax 100 LX,
Pieter Grimmerink
EPP support in parport.c,
Bart Duchesne
Driver Linking Question,
Greg Cannon
back ground debug? IDE support?,
Margaret Ryan
bootloader images,
Ronny L Nkkkkkkk.se>
Bcc + nop,
Ronny L Nkkkkkkk.se>
Where can I get dev-boards with mor Flash/DRAM?,
Ortega, Artur
RTAI patch & ETRAX kernel?,
Pieter Grimmerink
modem login problem, hwtestserial -loopback fails,
joost
SNMP Client for Etrax 100LX,
Andreas Auer
New compiler tools release: cris-dist-1.16,
Hans-Peter Nkkkkkkk.com>
jump at boot,
Ronny L Nkkkkkkk.se>
SSH on ETRAX?,
Don Stocks
std c++ libraries,
mschapira
python inside axis ;),
Vladimir Bormotov
Watchdog & ./flashitall,
Jihoon Bang
BlueZ & ETRAX100LX,
Marc Haase
couldn't restrict write permission,
joost
GLib support for ETRAX ???,
Marc Haase
New releases,
Jonas Holmberg
Kernel 2.4.14 slow due to softirq daemon?,
Zoran Tomicic
partition tables on r2.1.0,
mschapira
Problem about boot,
Ye Yongtao
How to get output fromm bootloader,
Flavio Molinelli
etrax100boot - cleanup + support for Amtel Flash (AT49BV1614T),
Roger Larsson
EPP problem in LX,
Eric Tang
Complete code examples?,
Hans "Wänman
Flashit problem,
SWNkkkkkkk.hk>
EPP not working,
Eric Tang
Using ETRAX 100LX without an OS ?,
Sebastian Andersson
Debian package for cris-dist-1.16 compiler tools available,
Hans-Peter Nkkkkkkk.com>
Large Storage for Developer Board,
Gerhard Großberger
ETRAX USB HowTo ????,
Flavio Molinelli
RJ45 connector!,
Yongtao Ye
NET-SNMP,
Andreas Auer
connecting more then one DRAM memory,
Stefano Vicenzetto
Error mapping Toshiba flash,
Henrik Löfgren
easyedit,
Szabo, Tamas
compiler 1.16,
Jihoon Bang
Problem to reach my devboard 100lx,
Serge Gardien
Where is cu ?,
Charles Chiu
ucdsnmp package for uCLinux?,
Andreas Auer
librarys?,
Andreas Auer
Error!!!,
Andreas Auer
attempting service discovery,
Stephen Bardsley
Flashit problem!,
Ye Yongtao
serial driver problem ttyS1,
Lindberg, Magnus
Cross-compiling libgmp problems,
Jussi Alanara
concurrent LAN Access PPP connections?,
Stephen Bardsley
libtool,
joost
Trying to Compile Tcl 8.3.4 for the Etrax 100LX Linux 2.4.x,
Markus Meng
library!?!,
Andreas Auer
ERROR : giving up on rtx!,
Peter Fredriksson
USB on devboard LX,
Rodolphe Averty
math,
Ronny L Nkkkkkkk.se>
- <Possible follow-ups>
- RE: math,
Mikael Starvik
Make error on R2_1_0, Etrax 100LX Linux 2.4.x,
Stefan Koch
Semaphores,
Henrik Löfgren
mount nfs drive Etrax 100LX Linux 2.4.x,
Stefan Koch
RE: mount nfs ... re smb,
Shayne
sile of libm.so.6 ,Etrax 100LX Linux 2.4.x,
Stefan Koch
parallel port?,
Andreas Auer
External interrupt,
Petr Jerabek
USB Port??,
Andreas Auer
Checksum of file,
Yongtao Ye
Dev-TRAX-Serial-ttyS1,
Gopal Chandavarapu
Serialport problem,
Joakim Eriksson
USB How to??,
Andreas Auer
image too large!,
Serge Gardien
Using an Axis 5600+ Print Server for Development?,
Don Stocks
diff inside axis?,
Vladimir Bormotov
Fanout of the 74LCX245,
Bart Duchesne
Connecting IDE HD,
David Jones
serial port 2 (COM2/ser2),
Andreas Auer
LUA,
Bart Duchesne
RE: 16Mb DRAM and Bad swap file.,
Mikael Starvik
Re: [PATCH] USB CRIS host controller usb_submit_urb() changes,
Bjorn Wesen
Printserver binaries,
Pijus Chanda
IDE (again),
Sergio Ruocco
Flash and DRAM prices and suppliers ????,
Don Stocks
USB Drives with Etrax 100LX?,
Don Stocks
Problems with ranlib-cris,
Ano nymous
Axis 2490 Serial Server,
Ulises Ortiz
POSIX Threads?,
Andreas Auer
hwtestserial -d /dev/ttyS0 -loopback 1,
Vladimir Bormotov
Error in during makefile operation.,
Uchil, Vilas Ramappa (UMR-Student)
Printserver for ETRAX 100LX?,
Pijus Chanda
Enabling RS-485 and other serial ports,
Gerhard Großberger
Multiple interfaces and boa web server,
Jon Altuna
elf binary,
Ronny L Nkkkkkkk.se>
Ported librarys?,
Ano nymous
MCM Internal SDRAM Config,
Patrick O. Murphy
unexpected hard reset on devboard_lx,
Patrick O. Murphy
Howto replacing default network settings?,
Pijus Chanda
problem on porting existing c++ code to etrax,
Wei, Shi Hai
Flash problem,
Johannes Karlsson
Serial port blocks!!!,
Andreas Auer
Differenz between ser0 and ser2,
Andreas Auer
IDE diriver error message as "hda: lost interrupt",
Kim, Hyojun
MCM Power Control,
Patrick O. Murphy
ktest is not working,
Liliana Manolache
boot loader problems and full duplex ethernet on Broadcom 5221,
David Kilp
Memory left on ETRAX LX devboard for user programs?,
Pijus Chanda
Possible soldering problems with ETRAX 100LX Multi Chip Module (MCM)?,
Pijus Chanda
Pad Size for mounting MCM's,
Patrick O. Murphy
New design documents and documentation published,
Fredrik Nkkkkkkk.com>
incorrect result returned from 'gettimeofday',
Wei, Shi Hai
Timer Interrupt.,
Eric Tang
custom serial driver,
Ronny L Nkkkkkkk.se>
serial based driver,
John Bindby
8-Mbyte flash problems,
David Kilp
process in inittab does not respawn,
joost
How to boot from serial port ?,
Elco Bouma
Attach to direct to the databus,
Hans "Wänman
parallel port/printer,
Stefan Koch
modem program for extrax-lx board,
mschapira
Ramdisk on Etrax,
fjrg_cesinel
Startup scripts,
fjrg_cesinel
RE: Startup scripts (problem again),
fjrg_cesinel
multiple Axis boards running at the same time?,
Eric Tang
rootfs mount,
Ronny L Nkkkkkkk.se>
Compilation problem,
Gopal Chandavarapu
does anyone can help me ho do i install the open bt stack on the developer board?,
Michaela Bone
Makefile problem,
fredrik
Room Left in LX Flash,
David Kaplan
Increasing RAM on devboard,
Robert D. Penny
bluetooth stack on axis board - but no message during boot,
Michaela Bone
Anyone using nfs?,
Chris Nkkkkkkk.com>
can someone help me ? bluetooth stack on axis board - but no message during boot,
Michaela Bone
why a "make cris-axis-linux-gnu" build the stack for host???,
Michaela Bone
anyone have compiled the open bt satck for the developer board?,
Michaela Bone
RS485,
fredrik
=?gb2312?B?16q3ojog?=,
jwchang
=?gb2312?B?16q3ojog16q3ojog?=,
jwchang
putting image on axis device server platform,
Laurence
modules,
Ronny L Nkkkkkkk.se>
Preemptive patch for etrax kernel?,
Pieter Grimmerink
crontab on Etrax 100lx,
Stefan Koch
DEVBOARD LX and USB,
Rodolphe Averty
Connection problem!,
fredrik
error while compiling sdp_server for axis board,
Michaela Bone
Flashing Status LED on boot,
David Jones
CONFIG_FRAME_POINTER,
Keith Owens
my RAM disk is too big,
joost
2-wire rs-485 problem,
Halvar Helgöy
Could not open /dev/ttyBTC,
Michaela Bone
dealing with time zones and daylight savig offset on Etrax 100lx,
Stefan Koch
PCMCIA,
ben
devboard 100LX and SCSI,
Aurelio Marignoni
BCM 5221 supplier,
Margaret Ryan
New compiler tools release: cris-dist-1.17,
Hans-Peter Nkkkkkkk.com>
connector x14 (logic analyzer) of Axis Developer Board LX,
ben
open,
Hansen Martin
- Re: open,
Hans-Peter Nkkkkkkk.com>
- <Possible follow-ups>
- open,
Hansen Martin
- RE: open,
Hansen Martin
Recall: open,
Hansen Martin
R: BCM 5221 supplier,
Stefano Vicenzetto
Printk,
Hansen Martin
Etrax 100lx and Profibus.,
fredrik
how i made a ppp connection - which programs i have to start?,
Michaela Bone
ppp conenction - which kernel option i have to check?,
Michaela Bone
set/clear RTS,
Hansen Martin
error with ppp /dev/ttyBT0,
Michaela Bone
how i add an usb conenctor ?,
Michaela Bone
location of system headers,
Pieter Grimmerink
is there a routing programm for the developerboard?,
Michaela Bone
has anyone tried iptables?,
Michaela Bone
USB Master Implementation done so far ?,
Markus Meng
Etrax100 to Etrax100LX migration roadmap,
Johann Dantant
where i can buy only one "PDIUSBP11A" - usb tranceiver ???,
Michaela Bone
dyndns,
Hansen Martin
symbol and footprint ETRAX for Proteus,
ben
MCM and SDRAM 256Mbit,
ben
Ethernet Transceiver Replacements for BCM5201,
Nkkkkkkk.net>
PROBLEM : image is too large,
Michaela Bone
Re: [bluetooth-dev] PROBLEM : image is too large,
Jonas Holmberg
Boot fail,
Eric Tang
Interrupt on parallel port in manual mode?,
Anders Hasselqvist
Disable DMA channels in ttyS0 and ttyS3,
Kim, Hyojun
why does libraries (eg: libipt_MASQUERADE.so) doesnt appear on the developer board?,
Michaela Bone
RE: why does libraries (eg: libipt_MASQUERADE.so) doesnt appear onthe developer board?,
Peter Kjellerstedt
has anyone confirured iptables (ppp to eth0) ??? (no text),
Michaela Bone
How does clk gated work?,
Anders Hasselqvist
lib inclusion,
John Bindby
Memory-mapped A/D converter,
Rafael Collantes
Parallel port problem on LPT1,2, strobe signal, 100lx developer board,
Markus Meng
RAM chips and organization.. speed,
David Kaplan
USB usb mass storage driver,
Rodolphe Averty
Error in cgiparse.c,
Hansen Martin
Printing Problems using the development board,
Markus Meng
asprintf,
Hansen Martin
adding flash memory,
mschapira
Test msg,
mschapira
does anyone can send me a PDIUSBP11A ???,
Michaela Bone
diff gcc and gcc-cris,
Ronny L Nkkkkkkk.se>
fast blink on the yellow status led,
Pierre Filliolaud
ppp doesnt work ever!!??,
Semiz
ppp doesn't work!!??,
Semiz
PPP doesn't work evertime??!!,
Cem Semiz
insmod problem,
a.umurguiondo12477
root fs on flash which is not mapped in memory,
Pieter Grimmerink
flex,
Hansen Martin
RE: flex libraries,
Hansen Martin
usb-host.c - usb.c problem,
ogueta
Parallel port printing problem,
Kim Lester
has anyone connected a usb connector to the axis board? what kernel options i have to check?,
Michaela Bone
Porting OpenBT to the Etrax100Lx,
a.umurguiondo12477
Parallel port fails because /INIT held low,
Kim Lester
Problem with boot the Axis Developer Board,
Karel Šín
RS485 testing,
Hansen Martin
initializing DiscOnChip with etrax100boot?,
Pieter Grimmerink
Audio on the LX,
Ulrik Holmen
two small ones,
John Bindby
in which file i can write commands they went execute during boot? (nt),
Michaela Bone
Java on Etrax,
Peter Fredriksson
I found the kaffe app on your website, sorry.,
Peter Fredriksson
could not open boa.conf for reading,
a.umurguiondo12477
RE: Parallel portprinting problem,
Mikael Starvik
wired errors,
Hansen Martin
insmod QM_MODULES : Function not implemented,
Pierre Filliolaud
insmod: unresolved symbol,
Pierre Filliolaud
[no subject],
Jörgen Hägg
Module compilation problems / redefinitions of sigset_t,
christian
ipsetd / dhcp,
John Bindby
RE: Pid lkm,
Hansen Martin
Powered by axis,
Hansen Martin
uClibc support,
Jerome Lefranc
a little bug,
Hansen Martin
[no subject],
unaiuga
Problems with multipoint on btdm,
unaiuga
sys time to hw time WAS: two small ones,
Hansen Martin
Anyone konw how to implement PPPOE to Etrax100LX,
=?big5?q?Mr=20wing=20cheung=20chan?=
etrax & cs8900,
Max Speransky
Newbie "Hello" example problem. Help pls,
=?big5?q?Mr=20wing=20cheung=20chan?=
Adding a USB connecctor,
Randall Allen Holman
how to load html docs,
Ranganadh
R_WAITSTATES register,
Claude Girerd
"Hello" example Problem (2) help pls,
=?big5?q?Mr=20wing=20cheung=20chan?=
HDD on Etrax100LX IDE developer board,
Sangmoon Kim
Flashing via the Serial port,
Peter Fredriksson
rp-pppoe implementation,
=?big5?q?Mr=20wing=20cheung=20chan?=
uclinux and elinux difference.,
=?big5?q?Mr=20wing=20cheung=20chan?=
packet drops in the ETRAX100LX ethernet,
=?euc-kr?q?Kim,=20Hyojun?=
Bug report,
Hansen Martin
General IO Port A?,
Eric Tang
slow (really slow),
John Bindby
RS485 userspace test,
Hansen Martin
makespec,
Hansen Martin
Compiling Kernel 2.4.18?,
Anders Hasselqvist
Error with software installation,
Kangning
[no subject],
Andreas Auer
HELP!! serial port (ser2),
Andreas Auer
passwd command,
Peter Lo
Pb with ld-cris for compilation,
Pierre Filliolaud
Getting USB connector,
Eric Tang
insmod: unresolved symbol __copy_user,
Pierre Filliolaud
PPP segmentation fault,
franck.delpino
Missing files,
Kangning
Using other than kernel mentioned in devboard software,
Anders Hasselqvist
RE:,
Mikael Starvik
where i can find a 5v supply on the developer board lx?,
Michaela Bone
boa,
John Bindby
SW update trough modem,
Hansen Martin
?que?,
John Bindby
USB complete driver pre-realease for LX100,
Oscar Gueta
GCC 3.1,
franck.delpino
BGA Socket's : Anyone wants to share a minimum order for sockets forprototyping purpose,
Karsten Saunte
Porting app,
Per-Ola Svensson
Include lib,
Per-Ola Svensson
usb error : usb device is not claimed by any active driver,
Michaela Bone
Porting libpthread.so.0,
Kangning
USB Bluetooth error....but device detetcted,
Michaela Bone
NAND flash with ETRAX100LX,
Sangmoon Kim
attempt to access beyond end of device,
Sangmoon Kim
Intel Flash with ETRAX100LX,
Sangmoon Kim
has anyone tried the usb extension from axis with developer board and the follow system: ?,
Michaela Bone
Réf. : Re: PPP segmentation fault,
franck.delpino
ERROR usb-host.c: packet i greater then 64 for urb...????,
Michaela Bone
Add device,
Kangning
PCMCIA interface in software,
Pascal Buhler
SNMP and Cron scheduler on ETRAX,
Pálsson Karl
MCM: problem with booting,
Stefano Vicenzetto
Kernel panic caused by ping -f & iptables problems...,
polto
binaries,
Philip Pfisterer
BUGS in kernel / ethernet - CPU ...,
Alexandre Poltorak
Connector for logic analyzer (x14),
Rafael Collantes
Re. Add device,
Kangning
application compilation,
babulnat
Ethernet driver 10 not 100 Mbps,
polto
Promiscuous Ethernet problem,
ulf.sjostedt
AW: dealing with time zones and daylight savig offset on Etrax 100lx,
Stefan Koch
telnet,
Stefano Vicenzetto
CRTSCTS flag,
Johan Hallberg
newbie-help,
Ranganadh
design cycle,
Max Speransky
problems with netbooting and image file,
Jonathan Wilkinson
RE: AW: dealing with time zones and daylight savig offset on Etrax100lx,
Mikael Starvik
File date,
Hansen Martin
- <Possible follow-ups>
- File date,
Hansen Martin
SAMBA on etrax100lx,
Sangmoon Kim
Some thoughts on ethernet.c,
Jarkko Tuomi
File dates,
Hansen Martin
error : read only file system ....(network.conf),
michaela
<Possible follow-ups>
Fw: error : read only file system ....(network.conf),
michaela
com port DTR and RTS,
Murray Snowden
Where I can buy BCM5221,
Benoit COQUILLE
com port DTR and RTS - work around,
Murray Snowden
New compiler tools release: cris-dist-1.19,
Hans-Peter Nkkkkkkk.com>
Access to the RS485,
Kangning
RTC interrupts.,
Rafael Collantes
Time zone list,
Petr Hanyk
Problem booting devboard,
Randall Allen Holman
ETRAX 100 simulator?,
Rick Dean
ddr sdram,
Marcin Kozik
Re: After upgrade, Linux 2.4.14 refuses Telnet connections ?!,
Dave Chevalier
AGAIN: Serial ports non-standard speeds,
Rafael Collantes
cgi access,
Ranganadh
How to add library for iptables ???,
franck.delpino
nanosleep,
Marko Kurtto
Réf. : Re: How to add library for iptables ???,
franck.delpino
3 questions about iptables,
stadler stephan
Réf. : 3 questions about iptables,
franck.delpino
New compiler tools release: cris-dist-1.20,
Hans-Peter Nkkkkkkk.com>
Crystal Selection,
Gabriel Siftar
./ktest: boot_linux: command not found,
Ranganadh
Syncronous serial ports. Strange clock behaviour (3x),
Rafael Collantes
Fw: Re: USB host driver update,
Oscar Gueta
ECP support in parport.c,
Pieter Grimmerink
IPC MessageQueue problem??,
Johan Hallberg
#### BLUETOOTH SUCCESS #####,
franck.delpino
Kernel with module support,
Pieter Grimmerink
C++ standard library,
Tero Laitinen
Réf. : RE: #### BLUETOOTH SUCCESS #####,
franck.delpino
10base2 Ethernet bus architecture,
Claude Girerd
Math.h,
Rudy Fink
parport ECP & DMA,
Pieter Grimmerink
RE: Serial ports non-standard speeds,
Mikael Starvik
ruby python or perl for etrax?,
Joseph McDonald
parallel port programming,
Latha
R_PORT_G driver?,
Ronny L Nkkkkkkk.se>
Cron, SNMP and Perl again,
Pálsson Karl
Initialization for USB2?,
Matti Tikkanen
Internal Compiler Error,
Rick Luppino
Soldering a BGA,
Stewart Scott
Adding a battery,
Philip Pfisterer
SincSerial Port Interruptions,
fjrg_cesinel@infonegocio.com
Again with Syncronous Serial Port,
fjrg_cesinel@infonegocio.com
Top Level Makefile typo?,
Mike Sloman
kernel configuration,
Latha
network boot trouble,
Randy Scarborough
parllel port programming + ppdev,
Latha
sftpclient with get not implemented,
François Tičche
cannot run "mkprod,
=?big5?q?Mr=20wing=20cheung=20chan?=
help! cannot run "mkprod",
=?big5?q?Mr=20wing=20cheung=20chan?=
ECP problem,
Eric Tang
How to buy MCM ???,
franck.delpino
System bus developer board LX,
iflyer
ppp slows boot process,
Ken Klinner
caching mechanism,
Ronny L Nkkkkkkk.se>
usleep??,
Johan Hallberg
Bus connector,
iflyer
System bus on developboard LX,
ChelbanConstantin
Anyone know how-to Send E-mail from AXIS board ?,
=?big5?q?Mr=20wing=20cheung=20chan?=
Byte Mode w/ DMA?,
Polichar, Aaron R.
Latest kernel?,
Jarkko Tuomi
Using DMA with ECP ports,
Mike Sloman
network throughput,
Akshay Adhikari
libxml2 port for cris-axis-linux-gnu,
Ben Adams
ser2net port for cris-axis-linux-gnu,
Ben Adams
ETRAX 100LX Bus Status,
Chris Nkkkkkkk.com>
non-monotonic do_gettimeofday?,
Akshay Adhikari
Java RMI on etrax,
Peter Fredriksson
Ethernet thoughput limited,
Polichar, Aaron R.
kernel messages with usb driver,
Mathieu Berland - 77160
RS485 problem,
Karel Šín
ifconfig, vlan support,
Akshay Adhikari
Etrax and floating point emulation,
Oliver Jones
Problems with experimental developer board Etrax 100LX-IDE with 4MB Flash, 32MB DRAM,
Ortega
Real Time Clock on AXIS Developement board ETRAX 100 LX,
Etienne Julien
Flash recommendations for MCM design,
Patrick O. Murphy
malloc problem,
Akshay Adhikari
cached cramfs?,
Ronny L Nkkkkkkk.se>
Devboard LX-100 Hardware Upgrade,
Timothy Lock
stdout/console etc,
John Bindby
2.4.19 and ktest,
Anders Hasselqvist
(1 << -1) ?,
Sebastian Andersson
Changing flash,
Johan Gustavsson
MCM Linux on Chip?,
Eric Tang
Etrax 100 MCM SDRAM problem,
Nkkkkkkk.com>
iounmap,
Ronny L Nkkkkkkk.se>
Problems booting own linux kernel 2.4.19,
Ortega, Artur
New compiler tools release: cris-dist-1.22,
Hans-Peter Nkkkkkkk.com>
Change direction of a pin on GPIOA from an app???,
Johan Hallberg
cannot compile simple "Hello world" program,
Udo Giacomozzi
JFFS on ETRAX100LX,
Sangmoon Kim
ETRAX BUG, Linux 2.4.19 and cris-dist.1.22,
Stefano Vicenzetto
I/O hw issue,
Ronny L Nkkkkkkk.se>
pthreads + memory,
Akshay Adhikari
USB isochronous,
Rodolphe Averty
How to clear external interrupt by software ?,
Pavel Batian
devboard_lx installation,
Oliver Vecernik
compile problems with pppd,
Jonathan Wilkinson
System V Message Queues,
Timothy Lock
gethostbyname() : file not found,
Aurelio Marignoni
I need to configure serial port to send 5 bit characters,
Henry Minsky
'no such device' with the open function on RS-485 port,
dchambrelan
libjpeg,
Johan Hallberg
off topic: 9 bit serial communication,
Pieter Grimmerink
BootsTrap,
liesinger
Question about excluding modules in Makespec,
Javier Abarca
PPPD Problems,
Jonathan Wilkinson
building kernel with RS485,
dchambrelan
Re: R: cris-dist-1.22 and 2.4.19 (was: Re: R: network throughput),
Akshay Adhikari
ftp flash problem,
John Bindby
strace,
Bryan Hackney
Problems with uc-libc compilation,
Javier Abarca
ttyS2 ???,
Johan Hallberg
Changing priority?,
Johan Gustavsson
OpenSSH port,
Boris Visnjic
ETRAX 100LX OS-less: help needed,
ulf.sjostedt
FLASH replacing,
Szabo, Tamas
Packaging,
Szabo, Tamas
MCM Flash Problem,
Gabriel Siftar
FLASH replacing again,
Szabo, Tamas
DNS???,
0x90
FLASH replacing success,
Szabo, Tamas
device platform casing,
0x90
help with makefile,
0x90
Re-makefile,
0x90
Re: device platform casing is impossible to open,
0x90
is there a way to upload flash via comport?,
0x90
network boot mode?,
0x90
Libraries,
0x90
compile with configure,
0x90
unresolved __down_interruptible,
Pieter Grimmerink
CRTSCTS undefined?,
Pieter Grimmerink
cascaded timers,
Akshay Adhikari
kernel update,
u9900545
Oops in ethernet,
Bryan Hackney
Ethernet oops,
Bryan Hackney
problem when buid devboard_lx environement,
Nkkkkkkk.com>
Buildning tips for mgetty!,
Fredrik Davidsson
ETRAX 100LX OS-less: RS422 port problem,
ulf.sjostedt
USB camera,
Peter Fredriksson
Missing files?,
u9900545
Response time,
Arne Bockholdt
MCM and devboard types,
Szabo, Tamas
missing features.h,
Pieter Grimmerink
ELF: not found (after kernel recompilation),
silver
RE: Pthread, Stl and DDD,
Lars Viklund
Unable to build cris-gdb,
Arne Bockholdt
OpenSSL for LX?,
Ken Klinner
kernel 2.4.19,
Szabo, Tamas
execute program,
Johan Gustavsson
link integrity led for ethernet on MCM / devboard_lx?,
Dave Chevalier
MCM Availability,
Gabriel Siftar
diagnostic programs for the chip,
mschapira
2.4.19 and GDB 5.2.1 released at developer.axis.com,
Mikael Starvik
Problems with boot_linux,
u9900545
general purpose driver,
u9900545
Templates & shared libs,
Boris Visnjic
[no subject],
Barry Stander
Startup script problems,
Jonathan Wilkinson
[no subject],
Dörte Waldöstl \(Ident Technologies\)
RE:,
Fredrik Nkkkkkkk.com>
RE:,
Fredrik Nkkkkkkk.com>
Couldn't activate software flow control ?,
Nkkkkkkk.com>
I2C bus speeds,
Behan Webster
[no subject],
Christer Österlind
ETRAX 100LX OS-less: more problems,
ulf.sjostedt
Problems with lp0,
Jonathan Wilkinson
CGI programming problem,
=?big5?q?Mr=20wing=20cheung=20chan?=
Problem with ktest,
Antonio Redondo Mozos
FW: Problem with boot_linux, can you help me?,
Jonathan Wilkinson
shell problems: export segfaults,
DI Simon Vogl
Two Network Interface,
Sangmoon Kim
RE: Problem with ktest (UTF-8 problem solved),
Johan Adolfsson
Controlling pins,
Martin Oberhammer
Compiling error on demo "hello" application.,
Fredrik Davidsson
Compiling X applications,
Szabo, Tamas
ETRAX version,
Randy
problem booting up new board,
Dave Rovner
voltage at parallel port pins,
Latha
pcb test problem,
zhouguochao
USB kernel compilation error philips webcam 680,
Markus Nkkkkkkk.se>
Kernel oops on Etrax MCM,
Stefano Vicenzetto
RE: Par Port,
Mikael Starvik
graphics libraries in C,
Latha
Re: graphics libraries in C,
Terje Pedersen
Altera Acex EP1K50 and syncser0,
Terje Pedersen
Fw: 100MHz SDRAM clk,
Terje Pedersen
Framebuffer,
Szabo, Tamas
- <Possible follow-ups>
- Framebuffer,
Szabo, Tamas
- framebuffer,
Szabo, Tamas
- framebuffer,
Szabo, Tamas
- RE: framebuffer,
Mikael Starvik
- RE: framebuffer,
Jonas Holmberg
- RE: framebuffer,
Szabo, Tamas
- FW: framebuffer,
Mikael Starvik
- RE: framebuffer,
Peter Kjellerstedt
- RE: framebuffer,
Szabo, Tamas
- RE: framebuffer,
Peter Kjellerstedt
- RE: framebuffer,
Mikael Starvik
using parapin freeware on etrax100lx,
Dave Rovner
- <Possible follow-ups>
- RE: using parapin freeware on etrax100lx,
Mikael Starvik
- RE: using parapin freeware on etrax100lx,
Mikael Starvik
- RE: using parapin freeware on etrax100lx,
Mikael Starvik
- RE: using parapin freeware on etrax100lx,
Mikael Starvik
- RE: using parapin freeware on etrax100lx,
Mikael Starvik
- boot loader not working after reboot host,
Dave Rovner
- RE: boot loader not working after reboot host - more info,
Dave Rovner
- Re: boot loader not working after reboot host - more info,
Hans-Peter Nkkkkkkk.com>
- RE: boot loader not working after reboot host - more info,
Dave Rovner
- RE: boot loader not working after reboot host - more info,
Dave Rovner
- RE: boot loader not working after reboot host - more info,
Dave Rovner
- RE: boot loader not working after reboot host - more info,
Lars Viklund
- RE: boot loader not working after reboot host - more info,
Dave Rovner
- RE: boot loader not working after reboot host - more info,
Dave Rovner
- Re: boot loader not working after reboot host - more info,
johana
- RE: boot loader not working after reboot host - more info,
Dave Rovner
Connecting a modem to the devboard.,
fdqps@alfaproject.com
Master Clock,
Leonardo Salomone
mcm_boot: "Bootloader corrupt...",
Sergio Ruocco
Kernel driver initialization sequence,
Szabo, Tamas
Reconfigure memory,
Alex Raimondi
execution time,
Szabo, Tamas
tmpfs size,
John Bindby
/dev/gpiog ???? one bit??,
Antonio Redondo Mozos
memory hunt,
John Bindby
/dev/gpiog ???? one bit ??,
Antonio Redondo Mozos
mknod /dev/video0,
Markus Nkkkkkkk.se>
boa 0.94 + authorization port?,
Dave Chevalier
LCD timing,
Szabo, Tamas
cannot flash devboard,
Akshay Adhikari
[no subject],
Charles Chiu
RE: boot loader not working after reboot host - more info,
Mikael Starvik
printk(),
Szabo, Tamas
Upgrade to 2.4.19,
silver
dma 8 bit peripheral,
Steve Jones
Impossibility to flash via ethernet port,
Benoit COQUILLE
PortA interrupt busy?,
Terje Pedersen
USB,
Szabo, Tamas
DEVBOARD_BT and kernel 2.4.19,
Marco Gönne
I2C and Peneral Purpose Port,
Steve Jones
open video0 trouble,
Markus Nkkkkkkk.se>
checking available memory,
Szabo, Tamas
User Memory available,
Steve Jones
Memory leakage?,
Szabo, Tamas
- <Possible follow-ups>
- RE: Memory leakage?,
Mikael Starvik
- RE: Memory leakage?,
Szabo, Tamas
- RE: Memory leakage?,
Szabo, Tamas
- RE: Memory leakage?,
Szabo, Tamas
- RE: Memory leakage?,
Mikael Starvik
- RE: Memory leakage?,
Szabo, Tamas
SDRAM in line resistors,
Steve Jones
Solder Etrax MCM,
unaitxe
leave unconnected pins open?,
Alex Raimondi
USB mass storage,
Szabo, Tamas
gpio pin not toggling,
silver
devboard_et software on Axis 9010 hardware?,
Sebastian Andersson
embedded beginner. :),
Eric Persson
etrax100boot error,
John Bindby
MCM: problems using DMA,
Stefano Vicenzetto
RE: problems using DMA,
Mikael Starvik
Battery powered ram,
Pieter Grimmerink
unable to create file "network.conf",
Latha
AXIS you received a greeting card created by Charles.,
Charles Chiu
socket leak?,
Akshay Adhikari
RS-485 port using on ETRAX LX and RS-485-to-RS232 converter by Moxa...,
Vladimir Bormotov
9 bit serial communication,
Szabo, Tamas
synchronous serial bidirectional master mode,
Pieter Grimmerink
unsubscribe,
Holger Kling
- <Possible follow-ups>
- unsubscribe,
Charles Chiu
- unsubscribe,
Wang Kangning
- unsubscribe,
Johan Hallberg
- unsubscribe,
dchambrelan
- unsubscribe,
Matthew Eash
- unsubscribe,
Hassan Mansouri
- unsubscribe,
Dave Rovner
- unsubscribe,
Janne
- unsubscribe,
Dalton Hamilton
- unsubscribe,
Tim
- unsubscribe,
semiz
- Unsubscribe,
Dhaval
- unsubscribe,
keparker
- unsubscribe,
Frank Brown
- unsubscribe,
Liesinger - www.lssystems.at
- unsubscribe,
Steve Gulick
- UNSUBSCRIBE,
Felipe Malzoni Mattos Oliveira
- UNSUBSCRIBE,
Felipe Malzoni Mattos Oliveira
- UNSUBSCRIBE,
Felipe Malzoni Mattos Oliveira
- UNSUBSCRIBE,
Felipe Malzoni Mattos Oliveira
- unsubscribe,
jo
- unsubscribe,
dhaval_shah
- unsubscribe,
Christoph Leitner
- unsubscribe,
Handschin Gerold
- unsubscribe,
Listas de Correo
- unsubscribe,
Andreas Wally
- unsubscribe,
Francisco Javier P˙ffffffffffe9rez Sancho
- unsubscribe,
Jesús Manuel Conejo Sarabia
- unsubscribe,
José Antonio
- unsubscribe,
shurik32
- unsubscribe,
Albert Wan
- unsubscribe,
Falcon, George
- RE: unsubscribe,
Karl-Johan Perntz
- RE: unsubscribe,
Karl-Johan Perntz
- unsubscribe,
bpostma
- unsubscribe,
shurik32
- unsubscribe,
=?koi8-r?Q?=E0=D2=C9=CA?=
- unsubscribe,
Leonardo Salvatore
- unsubscribe,
Heinrich E. Seifert
- unsubscribe,
Keith Guerin
- unsubscribe,
wem
- unsubscribe,
Heinrich E. Seifert
- unsubscribe,
Alex
- unsubscribe,
Magnus Ivarsson
- unsubscribe,
Keith
- unsubscribe,
Markus Zingg
- unsubscribe,
Andrea Partinico
- unsubscribe,
Andrea Partinico
- unsubscribe,
debbo82@libero.it
- unsubscribe,
Dave Whittaker
- unsubscribe,
Dan Nelson
- unsubscribe,
Mutti Kocbayindiran (mkocbayi)
- unsubscribe,
Christian Leu
RE: 9 bit serial,
Szabo, Tamas
More faster Etrax100LX,
Sangmoon Kim
custom made devboards,
Akshay Adhikari
can't edit network.conf!,
Eyal Katz
Asynch Serial Port 1 FIFO,
Leonardo Salomone
MCM boot-up problems - possible filesystem or flash issues?,
Fettahlioglu, Mahmut
synserial max speed,
Pieter Grimmerink
What's left of the 100MIPS,
Peter van Duijn
problem with the boot_linux perl script,
mschapira
USB-Server?,
Dag Brattli
problems building a kernel for cris,
Eyal Katz
Fast responce (Interrupts),
Peter Fredriksson
New compiler tools release: cris-dist-1.24,
Hans-Peter Nkkkkkkk.com>
storing images in RAM instead of Flash,
Latha
how to link special libraries while cross compiling,
Latha
Kernel oops using DMA on MCM,
Fettahlioglu, Mahmut
- <Possible follow-ups>
- RE: Kernel oops using DMA on MCM,
Mikael Starvik
- RE: Kernel oops using DMA on MCM,
Fettahlioglu, Mahmut
- RE: Kernel oops using DMA on MCM,
Fettahlioglu, Mahmut
- RE: Kernel oops using DMA on MCM,
Mikael Starvik
- RE: Kernel oops using DMA on MCM,
Phoenix
- RE: Kernel oops using DMA on MCM,
Mikael Starvik
- RE: Kernel oops using DMA on MCM,
Fettahlioglu, Mahmut
- RE: Kernel oops using DMA on MCM,
Mikael Starvik
- RE: Kernel oops using DMA on MCM,
Fettahlioglu, Mahmut
- RE: Kernel oops using DMA on MCM,
Mikael Starvik
FTP and network problems.,
Henrik Löfgren
usleep() timing problem,
Latha
Dual MAC,
Sangmoon Kim
Creatin' n' linkin' shared libs with cris-g++,
Sampo Nkkkkkkk.fi>
PAR0,
Michael Boeck
A few newbie questions,
Cliff Bryant
Floppy Disk Boot,
B.Ashraf
Serial 9bit (mark / space parity),
Szabo, Tamas
mcm ethernet address,
unaitxe
ftp flash still flaky,
Akshay Adhikari
e2fsprog and fdisk...,
=?ks_c_5601-1987?B?UmFuZHkgTGVlXCjAzLvzv6xcKQ==?=
Serial 9bit (mark / space parity) update,
Szabo, Tamas
disabling the debug port,
mschapira
Sersrvd Source,
Gabriel Siftar
Send data on serial port!,
Goran Hillebrink
Réf. : RE: Send data on serial port!,
dchambrelan
RE: [2.5 patch] small cleanups for arch/cris/drivers/serial.c,
Mikael Starvik
RE: Réf. : RE: Send data on serial port!,
Szabo, Tamas
Question about uClibc/uC-libc,
Javier Martinez
Why do I have to ping before telnet?,
Terje Pedersen
verify problem,
B.Ashraf
Linux 2.4.19 and PAN profile for devboard_bt-R1_0_0,
Jonas Holmberg
Delay in millisecond,
Nkkkkkkk.com>
Pin PLLVSS,
Alex Raimondi
RE: Memory test for etrax,
Mikael Starvik
ISA bus type in etrax,
Saiful
problem with installing the Dev. Kit,
R
Serial port,
Henrik Johansson
Ethernet Latency,
Marco Gönne
some general question,
Gangmeng Ji
How to boot from serial port with Etrax MCM and etrax100_boot,
Arne Bockholdt
how to control JFFS garbage collection?,
Ken Klinner
Conflict between Serial Boot port and Debug port ?,
Arne Bockholdt
USB problems,
Peter Fredriksson
[dev-bluetooth] AXIS 9010 Flashing,
Bertrand Payet
Power Management using Etrax 100LX,
Tim Meese
C++ linking problems with MCM dev issue.,
Mike Sloman
Timer interrupts,
ulf.sjostedt
Ethernet controller hangs?,
ulf.sjostedt
mmu setup for custom board,
Randy
linux-2.4.19 & devboard lx,
wem
SDRAM config,
Alex Raimondi
MCM harware implementation,
Claude Girerd
e100boot for Windows available?,
David Kilp
Problem with Ethernet and Etrax 100LX on our own board,
Alex Raimondi
Problems with new tools,
Alex Raimondi
[Bluetooth-dev] Problem during l2ca connection,
Bertrand Payet
Network boot problem...,
=?ks_c_5601-1987?B?UmFuZHkgTGVlXCjAzLvzv6xcKQ==?=
board release 2.2,
Ronny L Nkkkkkkk.se>
RTC not keep the date,
Szabo, Tamas
kernel panic addon,
Alex Raimondi
PostgreSQL,
Szabo, Tamas
RE: e100boot for Windows UPDATE,
David Kilp
Network speed,
Terje Pedersen
kernel panic: Attempted to kill init!,
Alex Raimondi
external peripheral access csp4,
Claude Girerd
New compiler tools release: cris-dist-1.25,
Hans-Peter Nkkkkkkk.com>
mii-tool,
Akshay Adhikari
debug port,
mschapira
Serial communication without DMA/FIFO. (Low latency),
Henrik Löfgren
Debian packages of cris-dist-1.25 available,
Hans-Peter Nkkkkkkk.com>
MAC address / serial number,
ulf.sjostedt
integrated HUB repeater with MCM,
Claude Girerd
Debugging on etrax,
Alex Raimondi
MAC address,
Pieter Grimmerink
RE: e100boot for Windows UPDATE AGAIN,
David Kilp
Change init sequence of driver modules,
Arne Bockholdt
Booting trouble, help me!,
luca.guerrini@poste.it
GP-IB (7210 or 9914),
Szabo, Tamas
Any sample code or suggestions for Serial Port input process,
Jack Liang
Problem with ktest and flashit on RH8,
David Vogt
question about init_ioremap,
Alex Raimondi
Ethernet speed,
Alex Raimondi
Adding a camera to the LX100,
Keith W. Guerin
ioremap and iounmap,
Alex Raimondi
How much ROM and RAM?,
luca.guerrini@poste.it
Axis' 2.4.10 patches to correctly run the KVM?,
luca.guerrini@poste.it
Problems with FTP,
fjrg_cesinel@infonegocio.com
SDLC/HDLC on sync serial port,
Björn Gabrielsson
waitpid sdpserver:no child processes,
(alumno) unai garcia
serial spewing garbage,
Randy
request of help with GPRS & ppp on ETRAX-LX box,
jo
Reducing appication size for non-lx platforms,
David Vogt
Reply:RE: Ethernet speed,
Terje Pedersen
AutoPPP for agetty,
Pieter Grimmerink
kernel messages on debug port,
Pieter Grimmerink
Releasing RTS in RS485 mode,
Steen Jansdal
cannot create MTD RAM device, parital line at end ...,
Nkkkkkkk.de>
IRQ problem,
Nkkkkkkk.com>
dev software install problem,
Rob Lepage
ATA on axis,
kjj
new index.html,
B.Ashraf
Memory corrupt?,
Aron Wieck
issue with DTR on devboard_lx,
Dave Chevalier
corrupt flash chip,
Alex Raimondi
AW: new index.html,
Baab, Ingo
Fw: USB problem on devboard_lx,
kangjerjyh
TCP, UDP and multicast,
Stefano Vicenzetto
External DMA driver,
Arne Bockholdt
E1 (PRI ISDN) interface,
w.e.baertsch
Connecting a monitor to the etrax,
Alex Raimondi
Placing data section to fix address,
Bodolai Tibor
serial port loop,
Szabo, Tamas
Using external DMA in output direction,
Arne Bockholdt
adding modules to the kernel,
Amit Kucheria
USB Mass Storage device,
Sangmoon Kim
FTP flash problems,
Fettahlioglu, Mahmut
External DMA interrupts,
Arne Bockholdt
mechanical drawings of developer board,
Szabo, Tamas
Dev board USB problem,
Quinton Jansen
A question about bootstrap,
John_Pham
Problem with latest GCC,
Arne Bockholdt
The flash file system!,
Göran Hillebrink
gcc-cris linking problem,
Paul Krause
NFS-Root,
Uwe Reimann
serial ports on devboard_lx,
Amit Kucheria
Schematics,
Aron Wieck
MMapping the SRAM into user space,
Arne Bockholdt
SSH/SFTPD port for devboard,
Paul Krause
Elementry Problem,
Hassan Mansouri
RE: AXIS ETRAX 100LX ethernet speed,
Mikael Starvik
keyboard on serial port,
Szabo, Tamas
Downloading problem,
Hassan
Downloading Target,
Hassan Mansouri
Attention HW and SW consultants,
Fredrik Nkkkkkkk.com>
zlib, ktest, console (newbie),
Peter Zankl
axis82 /etc directory,
W. E. Masson
/etc symbollic link not a problem,
W. E. Masson
crash in c++ library (sstream),
Thomas Meier
Ethernet transceiver - PHY address,
Pieter Grimmerink
axis82 flashitit,
wem
Linux 2.4.20 for developer board lx,
Hassan Mansouri
2.4.20 doesn't compile,
John Bindby
Modem Driver,
Dan Nkkkkkkk.au>
response problem.,
jjhwang
ktest problem,
Robert Hibberdine
Axis 2100 web server question,
Uros Kotnik
axis82,
wem
cris-dist-glibc,
Uwe Reimann
upgrating soft for windows ? (e100boot),
Alexandre Poltorak
Problem with flashit script/bootloader,
dhebert
devboard_lx don't boot afrer flashing to 2.11,
Alexandre Poltorak
BOUNCE dev-etrax@xxxxxxx.fi>],
owner-dev-etrax
problem to flush ...,
Alexandre Poltorak
GCC or AS error,
Uwe Reimann
debugging on devboard82,
Akshay Adhikari
Checking Available Free Space in Memories,
Hassan Mansouri
rp-pppoe compile ?,
jjhwang
Chat On ttyS0,
Dan Nkkkkkkk.au>
Cannot Load Image To Dev Board,
Dan Nkkkkkkk.au>
utelnetd,
John Bindby
Perl,
Szabo, Tamas
make modules and make modules_install,
Michael T. Francis
I2C on devboard 82,
Martin.Daublebsky
USB Isochronous Traffic,
Michael T. Francis
Bluez on etrax?,
JOHANkkkkkkk.za>
Gentoo for cris,
Uwe Reimann
Can't load boot code - "Bootloader corrupt." message,
Sid Mayer
USB Keyboard and Devboard82,
Dave Matlock
NTP Client,
Dan Nkkkkkkk.au>
FW: NTP Client (rdate),
Szabo, Tamas
IDE: unknown partition table,
Stefano Vicenzetto
Kernel compilation,
Murat Loo
RE: unknown partition table,
Mikael Starvik
ktest errors,
Murat Loo
Syntax error in executable on AXIS,
Matthew Eash
snmp port for Axis,
David Kaplan
Memory Usage,
Dan Nkkkkkkk.au>
Shared object on etrax,
Patrick Riphagen
Problem with external dma and linked lists.,
Arne Bockholdt
GCC 3.2.3,
bh
Interfacing Axis to 8/16 bit device,
John_Pham
C++,
Dan Nkkkkkkk.au>
- <Possible follow-ups>
- RE: C++,
Mikael Starvik
- C++,
Jeremy Turner
- RE: C++,
Peter Kjellerstedt
- C++,
Dan Nelson
Interpreter / dynamic C libraries (.so),
Szabo, Tamas
Kernel panic when using USB,
Peter Fredriksson
Still Getting Errors With C++,
Dan Nkkkkkkk.au>
unsubscribe name_of_mailing_list,
LE CALVE, Laurent
devfs,
Uwe Reimann
AW: Interpreter / dynamic C libraries (.so),
Baab, Ingo
License of downloadable sources,
Uwe Reimann
Com 1,
Lennart Benoot
- <Possible follow-ups>
- RE: Com 1,
Magnus Mĺrtensson
Hanging with data on COM0,
Patrick Riphagen
adding a peripheral?,
Kevin Wooley
insmod: unresolved symbol: __down_interruptible,
timjvoss
Problem running kflash,
Lennart Benoot
Serial boot problems,
Pieter Grimmerink
RE: Problem with Developer Board (My own version of the problem),
Magnus Mĺrtensson
IDE-Benchmarks,
Uwe Reimann
Re: Possible memory leak in ethernet driver,
Christer Weinigel
No hostname in DNS,
keparker
RS-485 vs 232,
Patrick Riphagen
Schematic Library,
Uwe Reimann
installling OPC Server in Axis 83,
Saiful
ATA devices on Etrax,
Uwe Reimann
proc file sytem,
Saiful
hwtestio problems,
Doane,Jeffrey A.
booting question,
Kevin Wooley
Problems with installing DevBoard82 Software,
Thomas Brehm
Updated reference design for the MCM,
Fredrik Nkkkkkkk.com>
problem with <unistd.h>,
Kevin Wooley
make files question,
Kevin Wooley
ETRAX MCM running warm,
dhebert
serious problems with the Top-Level Makefile,
Kevin Wooley
now problems with kflash,
Kevin Wooley
I2C & Power supply,
Peter Mueller
Fiber Optic Connection?,
Thomas Brehm
PPP dialin server,
Martin Persson
getting other libraries onboard,
Patrick Riphagen
serial port response time,
Kevin Wooley
FW: Axis 2100 letter,
Philip Pfisterer
glibc-2.3.1 for cris,
Uwe Reimann
kernel 2.5.x,
Szabo, Tamas
Setting priorities of tasks,
Doane,Jeffrey A.
Etrax100LX SDRAM problem,
Pieter Grimmerink
problem with gdb-cris,
Schachner Thomas
Memory available?,
JOHANkkkkkkk.za>
Re: AW: problem with gdb-cris,
Orjan Friberg
AW: AW: problem with gdb-cris,
Schachner Thomas
AW: AW: AW: problem with gdb-cris,
Schachner Thomas
serial port write slowness??,
Kevin Wooley
Using HDD 160GB ?,
jjhwang
AW: AW: AW: AW: problem with gdb-cris,
Schachner Thomas
porting pthread for ETRAX BT board,
Aneesh M Raj
porting lpthread.so to BT board,
Aneesh M. Raj
Problems compiling pppd,
Lennart Benoot
running pppd,
Lennart Benoot
Break Root Password,
Dalton Hamilton
8bit SRAM howto,
Pieter Grimmerink
Shut down the memory bus (for a while),
Bernhard Mäder
Problems booting kimage on new ETRAX100LX Dev Board,
Linas Petras
termcap file?,
Kevin Wooley
problem with ioctl call,
Schachner Thomas
AW: problem with ioctl call,
Schachner Thomas
AW: AW: problem with ioctl call,
Schachner Thomas
Etrax MCM Power, Power Management & Errata,
Wayne Radochonski
gpio question on Axis82,
Kevin Wooley
Errata update, ETRAX 100LX and the MCM,
Fredrik Nkkkkkkk.com>
Optimizing libraries for Etrax LX,
Johann Dantant
pcf8563.o missing in Makefile,
Pieter Grimmerink
AW: AW: AW: AW: AW: problem with ioctl call,
Schachner Thomas
external NMI howto,
Pieter Grimmerink
AW: AW: AW: AW: AW: AW: problem with ioctl call,
Schachner Thomas
undefined references (__raw_readb),
Pieter Grimmerink
Debug port speed!,
Göran Hillebrink
/dev/console,
Pieter Grimmerink
AW: AW: AW: AW: AW: AW: AW: problem with ioctl call,
Schachner Thomas
Flashing the board from Linux,
Uwe Reimann
reset button on the devboard82,
Kevin Wooley
USB storage on Axis 82/83,
jansenq
Boot kgdb kernel problem,
Linas Petras
[no subject],
icadi
16 KHz timer,
Mathieu Berland - 77160
Kernel 2.4.19 on Axis83?,
Unai García
parallel port pin voltages,
Doane,Jeffrey A.
rs485 2-wire on devboard 82?,
Ken Klinner
libm trig functions,
Tariq Azwaz
Problem with DGRAM multicasting,
Johan Nkkkkkkk.be>
pcf8563.c bug,
Pieter Grimmerink
I2C ACK/NACK,
Pieter Grimmerink
Another I2C issue,
Pieter Grimmerink
pcf8563 init called twice,
Pieter Grimmerink
synchronous port : clock rate in slave mode,
Mathieu Berland - 77160
problem with usleep?,
Kevin Wooley
MCM flash from Windows,
Nkkkkkkk.com>
symbolic links in the ROM system?,
Kevin Wooley
Solder ball U12,
Brian Millar
PCF8563 once more,
Pieter Grimmerink
MP3 software decode on MCM?,
James Finnie
linker problem with c++ exception,
Thomas Schwere
Oops,
jansenq
Cannot load code on my Dev 82 Board,
Phil Sutter
Help porting net-snmp agent,
Daniel Fraile Vergel
Norton AntiVirus detected and quarantined a virus in a message you sent.,
Nkkkkkkk.it>
segmentation fault in std::vector...,
Thomas Schwere
82 Kernel Build Error,
Dave Matlock
precision timer?,
Kevin Wooley
Reading data from par0,
Ion
I2C problem,
fjrg_cesinel@infonegocio.com
segmentation fault in multithreaded application with c++ stl,
Thomas Schwere
Devboard_82 corrupt bootloader,
Robert Hibberdine
Math.h functions,
Doane,Jeffrey A.
RTC Trickle Charge Value,
Dave Matlock
Installing DevBoard LX SDK,
fjrg_cesinel@infonegocio.com
Problem Installing DevBoard LX software,
fjrg_cesinel@infonegocio.com
Reading input data from par0,
Ion Cadierno
USB Keyboard-Wedge Barcode Reader,
Dave Matlock
ppp packet filtering,
Phil Sutter
uClibc and devboard82,
Simon Posnjak
General architecture questions,
Anwer Bashi
problem with telnet,
Daniel Rudelstorfer
missing files for ppp,
Phil Sutter
sh: can´t access tty; job control turned off,
Unai García
2.4.20 & 2.4.21 kernel support for etrax/cris?,
chris
axis 2490 flashing,
Vladimir Bormotov
RE: devboard LX 8-bit interface,
Mikael Starvik
Q: ethernet.c changes from 1.33 (e100lx_mcm) -> 1.39.2.2 (devboard_82),
Dave Chevalier
RE: ethernet.c changes from 1.33 (e100lx_mcm) -> 1.39.2.2 (devboard_82),
Mikael Starvik
RE: ethernet.c changes from 1.33 (e100lx_mcm) -> 1.39.2.2 (devbo ard_82),
Mikael Starvik
uClibc,
Simon Posnjak
C++ -fhuge-objects RTTI problem,
Bryan Hackney
Flash problems with MCM,
Eric Lane
usb-host.c assert failed (Barcode Scanner Issue),
Dave Matlock
Unable to flash mcm,
keparker
Power supplying with 24V AC,
Steen Jansdal
SDRAM question,
Eric Lane
IDE unable to read partition table,
codedrone
ifconfig limitations on etrax100; how to determine current IP on Axis 2120 camserver?,
Scott Prive
Flashing MCM,
Eric Lane
Re: USB mass storage - JetFlash,
Orjan Friberg
Problems booting Devboard82,
Eric Lane
32 Meg sdram,
mschapira
Using ttyS1,
Unai García
How to get an Interruption in par0,
Ion Cadierno
ktest,
leopaul
programming I2C,
fjrg_cesinel@infonegocio.com
USB Keyboard,
Dave Matlock
Interruption in par0,
Ion Cadierno
MCM flashing problem,
Nkkkkkkk.com>
multiplxed data/address bus interface,
Abdul R Rafiq
Programming driver for etrax100lx,
Daniel Fraile Vergel
Bridge utilities,
Eric Lane
devboard_82 problems with etrax100LX,
Pieter Grimmerink
Software-Versions for devboard_lx,
Achim Lehmkuhl
MCM chips flash problem?,
Fettahlioglu, Mahmut
synchronous serial port doumentation,
dwshento
Problems changing debugger to serial0,
Ion Cadierno
cgi-video problem with Mozilla/Netscape,
dvilla
Axis 82 sechmatics and layout,
Phil Sutter
problems with synchronous serial DMA,
dwshento
GCJ CRIS port,
Andrew Radford
R_WAITSTATES not set properly by kernel,
Pieter Grimmerink
Linux 2.6,
Mikael Starvik
2100 and boa AccessLog,
Tuc
RE: Using external library (zLib),
Mikael Starvik
Kaffe on Devboard 82?,
Andrew Radford
Can't read from pin g24,
Christer Weinigel
Rs485 problems,
Robert Hibberdine
2 Questions on 2100,
Tuc
problem with boa & long passwords,
Stefano Vicenzetto
Gpio ports,
Robert Hibberdine
usb flash drives - scsi,
Akshay Adhikari
i/o on Par0,
Robert Hibberdine
Devboard LX and RTC,
Uwe Reimann
Kernel panic when high network traffic,
Kenny Nkkkkkkk.com>
Enable PCI,
Karel Šín
accessing csp0 thru /dev/mem,
Abdul R Rafiq
IDE on AXIS 82,
Kenny Nkkkkkkk.com>
RE: ARTPEC and GPL,
Mikael Starvik
/dev/lp0,
(Walter Harms)
Bluetooth and Dev 82,
jansenq
Debugging ld.so.1,
Uwe Reimann
Error Building The Kernel in SDK,
Richard Bush
Bluetooth Axis 83,
Lieven Govaerts
RE: My AXIS BT board has problem?,
Peter Kjellerstedt
usb-host rev. 1.19 with kernel 2.4.19,
Peter Fredriksson
Problems with the sync serial interface,
Benjamin Wilms
Ethernet stopped working,
Bernhard Mäder
Allocating memory with alloc_bootmem_pages,
Arne Bockholdt
Serial number SERNO not found at MCM boot,
girerd
[no subject],
Iain McKay
I2C EEPROM handling 2.4.19 vs 2.4.20,
Szabo, Tamas
RE: FW from info-nl: Problem flashing images to the axis 83 device server,
Jagoub Shamekhi
RE: [bluetooth-dev] Problem deleting file in /mnt/flash,
Peter Kjellerstedt
Problem deleting file in /mnt/flash,
Fabio Cornevilli
Etrax100LX Dev board USB Host interface,
=?big5?q?Mr=20wing=20cheung=20chan?=
[no subject],
icadi
Telnet Problem in COM1 and ethernet,
icadi
Problem: Flash doesn't get mounted while booting,
Vasant Shembekar
smbfs mount fails,
Vasant Shembekar
Compiling the ethernet driver as a module,
Martin Andersson
Cannot allocate memory,
Daniel Fraile Vergel
How to invert pa4 interrupt,
icadi
Problem of debug on a design with MCM,
girerd
automake / autoconf,
John Bindby
How can I use gpio port A?,
Carlos Ojea
Using ISDN with Devboard 82.,
Robert Hibberdine
unsuscribe,
Ulises Ortiz
Java VMs again ?,
Iain McKay
Sync serial interface as SPI,
keparker
Serial and sync serial use,
keparker
4MB flash Howto,
ik3huk\@libero\.it
Interprocess communications,
Daniel Fraile Vergel
cross compiling openssl.,
Eric Tang
I2C multimaster with devboard 82,
Martin.Daublebsky
Sleep mode for 100LX MCM?,
Martin Osmundsvĺg
Par port DMA,
Yuriy Prokazov
RE: Linux not boot,
Jonas Holmberg
Problem: Configuring RTC,
Vasant Shembekar
stopping the kernel from hogging /dev/ttyS0?,
Iain McKay
USB card reader,
Kenny Nkkkkkkk.com>
Newbie question: ktest and flashit,
u9900670
stv680 camera,
Karel Šín
usb-host.c 1.13 vs 1.19,
Saet IS
Flash boot problem,
Peter Severa
prototype not working,
Abdul R Rafiq
Network boot,
_VJ_
gettimeofday on cris-1.25 distribution,
Mathias Haage
use ttyS1 as normal serial port on devboard82?,
Henrik Jönsson
RV: Re: Network boot,
Carlos Ojea
Upgrading flash image,
Simon Posnjak
Problem with Parallel port,
Alok Damle
RS485 interface,
John Bindby
how to restore ftp flash update factory behaviour,
olivier Billard
Which License is used for flash tool,
Simon Posnjak
problem with cross compile,
(Walter Harms)
How do I compile PHP for Etrax,
Matthew Hook
nfs-mount problem,
(Walter Harms)
Image compression on etrax,
Peter Fredriksson
Notes about syncser0 (SPI),
Carlos Ojea
Atmel flash,
Phil Sutter
Problem with kernel configuration: fork() function,
Unai García
Problems with Software install,
Christoph
ttyS0,
Yuriy Prokazov
RV: ttyS0,
Carlos Ojea
Sound with Etrax,
Martin.Daublebsky
SSP in MASTER_BIDIR mode,
Carlos Ojea
Only 2MB external Flash with MCM2+8,
Bernhard Roessmann
RE: SSP in MASTER_BIDIR mode. New driver,
Carlos Ojea
RV: SSP in MASTER_BIDIR mode,
Carlos Ojea
MCM Flashing problems on custom hardware,
Stefan Mahlknecht
RE: SPI driver,
Carlos Ojea
SPI,
Carlos Ojea
ethernet code,
wem
Developer board hangs after ktest and flashit,
u9900670
porting BlueZ to Etrax 100LX MCM,
Stefan Briese
MCM2+8 with external Flash,
Bernhard Roessmann
slow parallel port,
Peter van Duijn
2.4.19. kernel problem,
Karel Šín
RV: SPI,
Carlos Ojea
RV: 2.4.19. kernel problem,
Carlos Ojea
RE: [bluetooth-dev] ktest problem...! (uploading new image),
Peter Kjellerstedt
Cron and crontab,
keparker
Kernel panic,
Uwe Reimann
boa webserver and ser0,
Martin.Daublebsky
read 5V signal on parport0,
Henrik Jönsson
2.4.19 kernel panic,
Karel Šín
- <Possible follow-ups>
- RE: 2.4.19 kernel panic,
Mikael Starvik
- Re: 2.4.19 kernel panic,
Orjan Friberg
- Re: 2.4.19 kernel panic,
Karel Šín
- Re: 2.4.19 kernel panic,
Orjan Friberg
- Re: 2.4.19 kernel panic,
Karel Šín
- Re: 2.4.19 kernel panic,
Orjan Friberg
- Re: 2.4.19 kernel panic,
Karel Šín
- Re: 2.4.19 kernel panic,
Orjan Friberg
- Re: 2.4.19 kernel panic,
Karel Šín
- Re: 2.4.19 kernel panic,
Orjan Friberg
- Re: 2.4.19 kernel panic,
Karel Šín
- Re: 2.4.19 kernel panic,
Orjan Friberg
- Re: 2.4.19 kernel panic,
Orjan Friberg
sftpclient problems,
Matthew Hook
GPIO,
Dave Matlock
Can I use binfmt_misc ? php with BOA?,
Matthew Hook
reset signal (Y10),
phil
GPIO driver support,
Phil Sutter
USB Hot Plugging Issue.,
=?ks_c_5601-1987?B?wMzH9sH4?=
semget not working,
Ajay Kolambekar
Flash compatibility,
Bernhard Mäder
semget( ) failes,
Ajay Kolambekar
Axis 82 Serial Debug Port,
Cedric Stevens
Re: Semget() fails,
Ajay Kolambekar
BUSCLK,
Ing. Eugenio Sabatella
Installation sequence,
B.Ashraf
standard libraries,
silver
Missing library??,
keparker
Axis as NFS server,
Sampo Nkkkkkkk.fi>
USB device not claimed by driver,
Karel Šín
HELP needed,
B.Ashraf
MPEG over 1394,
Phil Sutter
par0 interrupt,
Yuriy Prokazov
Will not boot w/out flash installed,
Bryan Hackney
bootstraping HOWTO ?,
(Walter Harms)
USB device is not claimed by any active driver,
Karel Šín
Assembly Language example,
brian
devboard_82-R1_90 boa compile fails on SuSE Linux 8.2,
Friedrich Lobenstock
Booting without flash,
Randy
sftpclient : get not implemented,
Ajay Kolambekar
[PATCH] patch-01-boa for devboard_82-R1_90 (was Re: devboard_82-R1_90boa compile fails on SuSE Linux 8.2),
Friedrich Lobenstock
DHCP Client Problem,
Arne Bockholdt
Kernel messages --> serial debug port,
Bernhard Roessmann
Assembly Language Question,
brian
Bootloader problems,
Bernhard Roessmann
timing bus status / reset network Flash mode on MCM,
girerd
where can I find glibc and ld-linux for etrax ?,
Albert Wan
Re: Assembly Language Programming Question,
Hans-Peter Nkkkkkkk.com>
parport statusbits,
(Walter Harms)
adding users,
mschapira
Direct PPP connection,
(Walter Harms)
compiling busybox-1.00-pre3,
Friedrich Lobenstock
solved: pppd on nullmodem,
(Walter Harms)
G++ 3.2,
Johan Nkkkkkkk.be>
Is this the USB problem from the errata? (long),
Friedrich Lobenstock
[APPS] preliminary busybox-1.0.0-pre3 for devboard_82,
Friedrich Lobenstock
Memory & MCM,
ndaher
RS 485 with Fast Timer API ???,
Christian Hoffmann [Nkkkkkkk.de>
Pascal on CRIS,
Bill Florac
kernel 2.6.0-x on devboard,
Szabo, Tamas
New compiler tools release: cris-dist-1.54,
Hans-Peter Nkkkkkkk.com>
New Devboard 82/83 SDK release,
Anders Torbjorn Johansson
Devboard 82/83 and serial modems,
Koen Pellegrims
RS 485 with Fast Timer API ??? Part 2,
Christian Hoffmann [Nkkkkkkk.de>
Missing headers,
Cedric Stevens
Java with GCJ?,
Andrew Radford
Fast serial respones, RTAI,
Bernhard Roessmann
ethernet frame errors,
William E. Masson
Mhonarc,
Berland, Mathieu
GDBM source code,
=?ks_c_5601-1987?B?wMzH9sH4?=
Crash when use of gcc-cris v1.22 but not with 1.24,
Göran Hillebrink
GPIO LPT1 and LPT2 Acting Differently,
Dave Matlock
Errors,
Murat Loo
[PATCH] busybox-1.00-pre3 "fix" procps/top.c when -O2 used on crisarch,
Friedrich Lobenstock
usb isochronous devices,
Fettahlioglu, Mahmut
Parallel port Input in Manual mode,
Alok
RE: Compile a.out,
Mikael Starvik
Kernel and filesystem image for testing without flashing?,
Wojtek Zabolotny
IBM/Hitachi Microdrive,
Nkkkkkkk.de>
[APPS] busybox-1.00-pre3 on devboard_82 R1_91,
Friedrich Lobenstock
devboard_82 R1_91 references to https://wwwint.axis.se/....,
Friedrich Lobenstock
flash_loading is a non valid led,
Friedrich Lobenstock
Errors Help need.,
Murat Loo
- <Possible follow-ups>
- RE: Errors Help need.,
Mikael Starvik
- RE: Errors Help need.,
Murat Loo
- RE: Errors Help need.,
Mikael Starvik
- RE: Errors Help need.,
Murat Loo
- RE: Errors Help need.,
Mikael Starvik
- RE: Errors Help need.,
Murat Loo
- RE: Errors Help need.,
Mikael Starvik
- RE: Errors Help need.,
Murat Loo
- RE: Errors Help need.,
Mikael Starvik
- RE: Errors Help need.,
Murat Loo
- RE: Errors Help need.,
Alexander Eder
Network boot mode,
Marcus Andersson
Windows version of flashit?,
Matthew Hook
RE: ftp update (was Re: Windows version of flashit?),
Matthew Hook
SSH on ETRAX,
keparker
[APPS] preliminary dropbear-0.38 (SSHD) for devboard_82 R1_91,
Friedrich Lobenstock
Problem with Sync. Ser. Slave Ouput,
dwshento
Auto-IP Address,
Gabriel Siftar
Socks library for etrax?,
Matthew Hook
System Quota,
Hwang JaeJoon
system hang + kernel oops because of high usb load?,
Friedrich Lobenstock
RE: system hang + kernel oops because of high usb load? (seems to be reproducable) (followup),
Mikael Starvik
USB 802.11 adapter,
Berland, Mathieu
[APPS] dropbear-0.39 (SSHD) for devboard_82 R1_91,
Friedrich Lobenstock
Linux 2.6.0,
Mikael Starvik
[APPS] bridge-utils with startscripts for devboard_82 R1_91,
Friedrich Lobenstock
jffs2 root partition,
Marcus Andersson
Joana iooioç/,
starvik
The current software for the Etrax 100 LX platform,
mschapira
Oops: bitten by watchdog,
Cedric Stevens
RE: 100Mbit Ethernet probelm,
Magnus Mĺrtensson
g++-cris - multiple call to virtual thunk across shared library causes SEGV,
Tobias Schütte
New compiler tools release: cris-dist-1.55,
Hans-Peter Nkkkkkkk.com>
[no subject],
mschapira
SSL/SSH on Axis 83 Device Server,
Erich W. Gunther
SSH/SSL/TLS SFTP HTTPS suite needed for on Devboard_82,
Erich W. Gunther
synchronous serial port IRQ,
dwshento
Use of parallel port for gpio,
phil
RE: developer kit with more security (was Re: SSH/SSL/TLS SFTP HTTPS suite needed for on Devboard_82),
Erich W. Gunther
Contributions,
Fredrik Nkkkkkkk.com>
Help portint SSL,
Daniel Fraile Vergel
Serial Latency Issues, Baud Rate Affects Buffering,
Eric Sorton
ifconfig resets the Etrax MCM CPU,
Arne Bockholdt
[APPS] dropbear and busybox updated for devboard_82 R1_91,
Friedrich Lobenstock
PPPOE client on 2100 camera,
gerencia
devboard_83 with R1_91 + patches01-05,
Johan Nkkkkkkk.be>
boa web-server,
Johan Nkkkkkkk.be>
[jonashg@xxxxxxx.com: Re: devboard_83 with R1_91 + patches01-05],
Jonas Holmberg
MAC address Filtering with Developer board and 2.4.14 Kernel ???,
Gopal Chandavarapu
using editcgi,
mschapira
[Fwd: Re: [conspire] MAC address filtering with 2.4.14 ????] -- DevBoard LX,
Gopal Chandavarapu
RE: [Fwd: Re: [conspire] MAC address filtering with 2.4.14 ????] -- Dev Board LX,
Mikael Starvik
RE: PCMCIA interface or CompactFlash or general I/O,
Mikael Starvik
Symbols not stripped ?,
Arne Bockholdt
Boa BASIC_AUTH,
Gabriel Siftar
LX - 82 - IDE - Compiler version - kernel version and Ebtables -RE: [Fwd: Re: [conspire] MAC address filtering with 2.4.14 ????] -- Dev BoardLX,
Gopal Chandavarapu
RE: Ethernet congession,
Mikael Starvik
Interrupts on PAR0 in manual mode,
Johan Nkkkkkkk.be>
External NMI handler,
Arne Bockholdt
dev83 serial boot,
Phoenix
clock drift?,
Ronny L Nkkkkkkk.se>
Etrax BGA reflow profile,
Pieter Grimmerink
parse error before "u32",
Stefan Olsson
Device server in outdoor environment,
Bjorn Gabrielsson
1.91 Dev 82 software with Cris 1.55 and Kernel 2.4.22 --------> make: *** [fimage] Error 2 <------- ( goal is to get to working with devlx board),
Gopal Chandavarapu
[no subject],
mschapira
[no subject],
mschapira
USB device not accepting new address,
Berland, Mathieu
RS-422 Port as GPIO,
Dave Matlock
What's the purpose of the NETWORK variable in network.conf ?,
Steen Jansdal
Use DMA and/or IRQ on serial port,
Philippe Frossard
Library ld.so.1, libcrypt.so.1 ...,
Philippe Frossard
Daylight Savings,
Dave Matlock
Design hint wanted...,
Stefan Olsson
LCD-driver: head.S:582: Error: Illegal operands,
u9900670
Problem with DMA registers with module driver,
Arne Bockholdt
rescue code / partition table bugs,
Ted Merrill
Toolchain building problems,
Simon Posnjak
JFFS2 problem,
Nkkkkkkk.com>
RE: Ported Version of e2fsck ..,
Mikael Starvik
Lock-up on MCM,
Eric
[Fwd: Re: LX - 82 - IDE - Compiler version - kernel version and Ebtables- RE: [Fwd: Re: [conspire] MAC address filtering with 2.4.14 ????] -- DevBoard LX],
Gopal Chandavarapu
Library libm and libncurses ...,
Philippe Frossard
Make images Error,
Philippe Frossard
LC_MESSAGES,
Philippe Frossard
termios.h,
Philippe Frossard
ptablespec,
Philippe Frossard
Re: ptablespec (I lost 1Mb in the flash3 partition),
Philippe Frossard
Software reboot problem,
Arne Bockholdt
- RE: Software reboot problem,
Pieter Grimmerink
- <Possible follow-ups>
- RE: Software reboot problem,
Mikael Starvik
- Re: Software reboot problem,
Arne Bockholdt
- RE: Software reboot problem,
Mikael Starvik
- RE: Software reboot problem,
Mikael Starvik
- RE: Software reboot problem,
Mikael Starvik
- RE: Software reboot problem,
Mikael Starvik
- Re: RE: Software reboot problem,
(Walter Harms)
- Re: Software reboot problem,
Pieter Grimmerink
- SV: Software reboot problem,
Mikael Starvik
- RE: SV: Software reboot problem,
Mikael Starvik
- RE: SV: Software reboot problem,
Mikael Starvik
- RE: SV: Software reboot problem,
Mikael Starvik
Problem with padflashimage,
Simon Posnjak
NO_DMA and ser0,
Simon Posnjak
Re: Building shared library with libtool (fwd),
Aymeric MOIZARD
GPIO PA1 erases the flash after result,
Peter van Duijn
termcap building...,
richard
./configure --host=cris-axis-linux-gnu once more...,
Pieter Grimmerink
Accessing image data on the Axis 2120 camera server,
Robert Reynolds
Kernel_panic_after_configuring_the_kernel,
Petter Hofverberg
RE: Kernel_panic_after_configuring_the_kernel,
Mikael Starvik
IP Forwarding on Devboard 82,
Lars Stahre
CGIC104,
Christoph
CGI again,
Christoph
problem_receaving_data_via_serial_port,
Petter Hofverberg
bootlinux error messages,
Ted Merrill
dev board keeps reseting to factory defaults!,
Richard Teltz
__USE_ISOC99,
Philippe Frossard
External interrupt order problem,
Arne Bockholdt
New compiler tools release: cris-dist-1.56,
Hans-Peter Nkkkkkkk.com>
eth1 : unknown error 524,
leopaul
flash questions,
phil
Unable to execute a shell script by setting a PATH variable,
Ajay Kolambekar
Etrax 100Lx MCM8+2 + 2 external flashes,
Johann Dantant
system time command with millisecond for Etrax 100LX-linux 2.0.38,
Philippe BRUYANkkkkkkk.edu>
CGI, XML, dynamic data,
Bilal Ashraf
Bluez USB device,
Alexander Eder
Re: preferred toolchains...,
richard
Can you attach an USB-hub to the Axis 82 develop board?,
newslist
USB Module Hangs,
Eric Chapman
Connecting Peripheral to system bus,
valentin tihomirov
Axis Device Server linux version 2.4.?,
Kiran Rama
GNU gettext & Etrax,
Pieter Grimmerink
devboard-82 software installation problems,
Rick Luppino
availability for etrax,
(Walter Harms)
problem installing cris-dist-1.56.tar.gz,
Kiran Rama
mcm memory test,
Vadim
[no subject],
Unknown
test, please ignore,
root
System time problem,
Zavaleev Igor
RE: USB Audio,
Henrik Eriksson
RE: connect serial port with ethernet port,
jose amador
problem install devboard_82,
jose amador
Test please ignore,
Anders Elvin
Images on BOA Webserver on the axis board,
Christoph
where can you retain original kernel image installed,
Kiran Rama
Question regarding ReiserFS support,
Anthony Russello
USB problem,
Stefan Briese
Devboard 83 ktest KERNEL PANIC,
Michael Boehmer
Testmail, pls ignore,
Johan Nkkkkkkk.com>
This is a test,
Olof Larsson
Help with boa server,
Christoph
Developer tools on mac OSX,
Robert Hibberdine
sending_mail_throug_Devboard82,
Petter Hofverberg
MMU Bus fault,
cedric.stevens
- Re: MMU Bus fault,
Orjan Friberg
- <Possible follow-ups>
- Re: MMU Bus fault,
Orjan Friberg
- Re: MMU Bus fault,
cedric.stevens
- Re: MMU Bus fault,
Orjan Friberg
- Re: MMU Bus fault,
cedric.stevens
- Re: MMU Bus fault,
Orjan Friberg
- Re: MMU Bus fault,
cedric.stevens
- Re: MMU Bus fault,
cedric.stevens
- Re: MMU Bus fault,
cedric.stevens
- Re: MMU Bus fault,
cedric.stevens
- Re: MMU Bus fault,
Orjan Friberg
- Re: MMU Bus fault,
cedric.stevens
- Re: MMU Bus fault,
cedric.stevens
- Re: Something wrong with DMA descriptor contents Panic,
cedric.stevens
- Re: MMU Bus fault,
cedric.stevens
- RE: MMU Bus fault,
Mikael Starvik
Sync Serial 1,
Peter van Duijn
RS485 lock up,
Chris Poole
Fw: Configuration of Baud Rates > 115200,
Martin Dittmer
problem with librarys,
amine
ktest and kflash,
amine
[no subject],
Andan Andan
RE:,
Mikael Starvik
Library ld.so.1, libcrypt.so.1 (make images),
amine
Not reboot after FTP upgrade,
Nkkkkkkk.com>
Reboot problem with ftp put fimage flash,
Wade Franklin
USB storage and Linux 2.4.22,
Faisal Alquaddoomi
Configuring Boa Web Server,
Daniel Fraile Vergel
2100 Questions,
Tuc
Parallel hard drive on devboard,
Jonathan Grettner
USB Bluetooth crash,
Alexander Eder
C++ and pthread,
Mario Viara
serial port DTR RTS direct control failed !!,
Pin Yang Ang
Embedded database recommendation?,
Randy Graham
Compiling for devboard LX with the devboard 82 package?,
Andrew Radford
Reserved Memory,
Mario Viara
Problems with Samba,
arussello
"File not found" problem,
chuckm
network setup,
bijou.abraham
RE: Execlp,
Mikael Starvik
Devboard 82 Release,
Anders Torbjorn Johansson
Devboard LX release,
Anders Torbjorn Johansson
reboot problem,
amine
Connecting to SyncSerial-Interface,
Markus Wentker
Axis Developer Board LX,
Frossard Philippe
Sending SMS from the devboard 82,
Emiliano Muńoz Vicente
IPC - semget() not working.,
Randy Graham
Again: SyncSerial Measure,
Markus Wentker
convert raw image data file,
P.Y.Ang
Access to BS2,
Phil Sutter
Ethernet problem on MCM,
Nkkkkkkk.com>
Carrier Detect with PPP,
Sinclair Hansen
Programming for RS-485 port on devboard_82.,
Randy Graham
Problem booting ETRAX100LX,
Oscar Elfving
synchronising frames,
Phoenix700
iproute2 Makefile,
Oscar Elfving
openssh for etrax,
mschapira
email messages * 3,
mschapira
Flash-Problem / No startup,
Markus Wentker
ETRAX 100LX MCM 4+16,
Fredrik Nkkkkkkk.com>
Rather odd request,
chuckm
Latest devboard_lx release fails to boot using "ktest",
Eric Sorton
Linker question,
Ronny L Nkkkkkkk.se>
building the boot loader,
mschapira
disable irq 25,
Kiran Rama
Axis 82 Devboard with Bluez or Affix,
Dirk de Jager
devboard_82 flash utility,
Phil Sutter
Flashing Axis 82,
Dirk de Jager
Mounting USB error,
Kiran Rama
Kernel Crashes,
Dirk de Jager
[no subject],
Koljadow Alex
LED and buttons,
Frossard Philippe
Rs485 connector,
Robert Hibberdine
cannot delete file,
P.Y.Ang
cannot delete file - 2,
P.Y.Ang
Detecting Ethernet link and setting TCP timeout,
Phillip Moore
2120 camera problem,
Robert Parkin
flashit with two network,
girerd
SERNO on MCM,
girerd
SERNO and MCM (solution found),
girerd
PCB and Schematic help,
Nkkkkkkk.com>
Axis 82 Developer Board with MCM 4+16,
rquan
100 MB Ethernet problem,
Zhuorong Deng
Devboard 82 R1.92,
Bernhard Roessmann
MCM16+4 Crash And Burn,
Darrell Hodge
GPIO select() and poll(),
Darrell Hodge
ping -b => DUP !,
girerd
20 MHz clock oscillator,
girerd
large flash ram and devboard_lx version 2.2.0,
mschapira
Compile errors building Etrax 82 tools,
Mark Richards
[Fwd: Re: 20 MHz clock oscillator],
girerd
Field Frame in ifconfig not 0 ?,
girerd
Bug in linux-2_4_26.diff in combination with a Deboard LX?,
Ferdy Hanssen
Curious flash messages,
Bernhard Roessmann
adding boot option hda=ide-scsi to boot of etrax 100LX IDE,
arussello
RE: RE: RE: Compiling for and using etrax 82,
Nkkkkkkk.gov
RE: Serial port config - kernel,
Mikael Starvik
RE: "Autostart",
Anders Torbjorn Johansson
MCM2+8 and BCM5221,
girerd
Wireless G USB Network Adapter,
wem
Hardware support in,
girerd
MCM4+16 and PHYSRST,
girerd
Modify the fstab file,
Rasmus Oudal Edberg
Axis 2100 compilation problem,
Borja Rodríguez Diliz
MCM 2+8 and MCM 2+4 latest software release,
girerd
usb-irda and etrax usb driver or how quicky we oops,
Simon Posnjak
program using RPC,
Bernd Schmitt
Hwclock Axis 83,
Nkkkkkkk.gov
readonly file system,
Mark Richards
Re: Boot process,
Nkkkkkkk.gov
RE: Static .v. shared - how to choose?,
Mikael Starvik
RE: Strange query on Axis devboard,
Mikael Starvik
Filesystems,
Eric Chapman
MAC-Adress,
Phoenix700
RE: Query related to finding memory leaks,
Peter Kjellerstedt
RTOS / RTAI on Axis Etrax,
Frossard Philippe
HD IDE: EXT2-fs error,
Stefano Vicenzetto
Dropbear sshd, adding users,
Nkkkkkkk.gov
Executable strip cris-strip,
Nkkkkkkk.gov
Cygwin compilation for cris tools,
Gurkan, Ozzie [ERS/ATL]
Com1 settings freezing board.,
Matt Montwill
sys/timeb.h,
P.Y.Ang
wrong read : readbits,
Sébastien LICHT
'which' command segmentation fault,
Nkkkkkkk.gov
mount nfs,
girerd
Battery backup pin,
Frossard Philippe
RTC I2C with battery and crystal,
Frossard Philippe
MCM 4+16 pin compatible with MCM 2+8,
Peter van Duijn
MCM 4+16 with a 4 port hub,
Phil Sutter
reading flash memory to file,
Eric
kflash & ktest problems,
Frank Brown
PPPD dialin server,
Damle Alok
Configuring,
Frank Brown
CCD sensor data processing,
P.Y.Ang
setting BS1 and BS2 pins,
Akshay Adhikari
RE: Struggling with "snatty" beast,
Henrik Eriksson
flashing via serial port,
Akshay Adhikari
Etrax Lock up,
Jeremy Turner
How to stop kernel dump to serial ports,
Gurkan, Ozzie [ERS/ATL]
Compiling libgphoto and gphoto2-2.1.4,
Nkkkkkkk.gov
Shared libraries,
Frank Brown
jumping to bootstrap code,
Akshay Adhikari
Newbe problem with ktest,
jim.deas
Serial Double buffers,
Frank Brown
Problem flashing axis 82,
Gurkan, Ozzie [ERS/ATL]
Flashing user files,
Gurkan, Ozzie [ERS/ATL]
flashing from ftp,
Marco Nkkkkkkk.com>
using jffs2 on platform deboard_lx 2.1.0,
mschapira
access file above document root,
P.Y.Ang
Linux code for Axis 2400+ or 2401+,
Oliver Jones
DMA and manual parallel port,
Jeremy Turner
Devboard82: problems when making images,
"Daniel Würfel"
ServerManager.srv,
P.Y.Ang
I2C bus,
Jeremy Turner
Boot problem,
Frossard Philippe
Re: More: new busybox on Axis 82,
Nkkkkkkk.gov
[no subject],
valentin tihomirov
I need two files: ld-2.3.2.so and libusb-0.1.so.4.3.0,
"Daniel Würfel"
Serial port ttys0 and ttys2,
Frossard Philippe
Gphoto2 using pkg-config during configure libgphoto2 notrecognized,
Nkkkkkkk.gov
Etrax 100 generate image file,
P.Y.Ang
Important changes to ETRAX 100LX MCM 4+16,
Fredrik Nkkkkkkk.com>
patch of ethernet.c,
Randy
0 byte cgi files,
P.Y.Ang
RS485 line turnaround,
Frank Brown
ARTPEC chip driver,
P.Y.Ang
Cross-compiling gphoto2-2.1.4,
Nkkkkkkk.gov
RS485 ninth bit works,
Frank Brown
Using GCJ,
Gurkan, Ozzie [ERS/ATL]
OPC-Server,
Martin Daublebsky
reduce image size,
Benjamin Klimpel
RE: Cross-compiling gphoto2-2.1.4 - adding libs to Axis?,
Nkkkkkkk.gov
RE: Compile directly on target?,
Gurkan, Ozzie [ERS/ATL]
Axis camera IO connector,
P.Y.Ang
BOA web server docs,
chuckm
Again: RS485 line turnaround,
Frank Brown
Strace for Axis?,
Nkkkkkkk.gov
Checksum of image is wrong !,
Randy Graham
DateTime lost between reboots.,
Randy Graham
Re: [gphoto-devel] cross-compiling for Axis 82,
Nkkkkkkk.gov
ktest works, but kernel panic after kflash,
"Daniel Würfel"
Offshore Wind Turbines,
Bryant Eadon
External memory,
Marek Pałka
Odp: RE: External memory,
Marek Pałka
Image checksum is wrong.,
Randy Graham
Better way to access list archive?,
Randy Graham
Use of GPIOG driver on g8-g23,
Jon Möller
[no subject],
gianmarcoromano
Lithium battery on Developer Board LX,
Frossard Philippe
What kind of flash on the MCM?,
Christer Weinigel
FW: Technique for field updates,
Mark Richards
dev/gpioa HIGHALARM,
P.Y.Ang
Interrupt latency problem,
Eric Dönges
Stack and interrupt question,
Daniel Fraile Vergel
Compilation of gnuTLS,
"Ken A. Redergĺrd"
compiling ghostscript,
Benjamin Klimpel
File in wrong format,
Benjamin Klimpel
RE: [PATCH] superflous do_softirq invocation in cris do_IRQ(),
Mikael Starvik
linux 2.4.22 vs. 2.4.26,
Fettahlioglu, Mahmut
Regarding looping mails over the weekend,
Fredrik Nkkkkkkk.com>
eCos on Cris,
Simon Posnjak
4M flash writes failing,
David Whittaker
Fujitsu flash,
Michael Boehmer
restart.cgi board malfunction,
P.Y.Ang
Who is stealing my cpu cycles,
Peter van Duijn
flash_all,
Marco Natali
- <Possible follow-ups>
- flash_all,
Marco Natali
Flash ROM disappears?,
Michael Boehmer
[no subject],
Unknown
Strange File system,
Alok Kumar Damle
LCD controller&Etrax connection,
Ferit Coşan
Execute-in-Place (XIP) from flash?,
Fettahlioglu, Mahmut
- Re: Execute-in-Place (XIP) from flash?,
Jonas Holmberg
- <Possible follow-ups>
- RE: Execute-in-Place (XIP) from flash?,
Fettahlioglu, Mahmut
- RE: Execute-in-Place (XIP) from flash?,
Mikael Starvik
- RE: Execute-in-Place (XIP) from flash?,
Fettahlioglu, Mahmut
- RE: Execute-in-Place (XIP) from flash?,
Mikael Starvik
- RE: Execute-in-Place (XIP) from flash?,
Fettahlioglu, Mahmut
- RE: Execute-in-Place (XIP) from flash?,
Mikael Starvik
- RE: Execute-in-Place (XIP) from flash?,
Fettahlioglu, Mahmut
Kernel module complying and unresolved symbol(s),
Simon Posnjak
MySQL on Devboard82,
"Daniel Würfel"
RS-485 problem,
Jayson Ingels
Crystal Controlled Oscillator,
Ferit Coşan
jffs2 scan CRC fails,
Alok Kumar Damle
ETRAX 100LX MCM 2+8 & cris-dist-1.56-1,
Andrew
sqlite on devboard82,
"Daniel Würfel"
2490 and devboard_lx-R2_2_0,
Scott T. Hardin
RE: Software equivalent BURN mode?,
Mikael Starvik
MCM 4+16 R_WAITSTATES,
Arne Bockholdt
PHP on devboard82,
"Daniel Würfel"
[offtopic] Small backtrace tool, betatesting,
Ronny L Nilsson
gdb,
Jeremy Turner
Retrieving PNG images from Axis camera/server,
Alan Perrott
Timers,
Dan Nelson
alternative to PHP?,
"Daniel Würfel"
/mnt/flash almost full, but no files in it,
Anders Blomdell
usb memory stick,
Akshay Adhikari
jffs/jffs2 patch [aka: /mnt/flash almost full],
Anders Blomdell
file i/o,
Jonathan Makofske
Processes being killed (kernel: __alloc_pages: 0-order allocation failed (gfp=0x1f0/0)),
Randy Graham
Boehm GC,
Simon Posnjak
dropbear v0.40,
mschapira
Fault addres from sigcontext,
Simon Posnjak
apache on devboard82,
"Daniel Würfel"
Alignment of the pointers,
Simon Posnjak
Error in syscall(2) ?,
Eric Dönges
New compiler tools release: cris-dist-1.59,
Hans-Peter Nilsson
busybox 1.00-rc3,
mschapira
DMA and the cache,
Ronny L Nilsson
fimage problem,
Robert Hibberdine
configuring dropbear,
mschapira
libffi,
Simon Posnjak
RE: Known DMA Bugs in MCM 4+16 (was : DMA and the cache),
Mikael Starvik
Bug in gcc,
Simon Posnjak
How to change the initial baud rate for the serial console ?,
Eric Dönges
Fwd: Re(2): Known DMA Bugs in MCM 4+16 (was : DMA and the cache),
Arne Bockholdt
external DMA peripheral to Ethernet,
Johan Bernspĺng
R_GEN_CONFIG,
Philippe Frossard
compiling libupnp,
Anthony Russello
[SPAM] Re:,
Bjornw
AMD Flash question,
Phil Sutter
ash & variable indirection,
Borja Rodríguez Diliz
kernel panic ?,
Hwang J.S
Dev Board 82/83 and RTAI,
Giovanni Sora
New versions of gdb-cris and the gdbserver,
Orjan Friberg
GPIO question,
Jayson Ingels
writing to R_GEN_CONFIG and compile problems with svinto,
Johan Bernspĺng
Serial port echoes?,
Randy Graham
hi,
Frank Legas
flashit and ktest problem (help me!),
Frank Legas
Etrax100LX crash :|,
Frank Legas
kernel compile problem,
Hwang J.S
OpenSSL on devboard82,
"Daniel Würfel"
libupnp port,
Fredrik Svensson
Problem with struct alignement,
Simon Posnjak
MCM Prototype Problem,
Mario Viara
New compiler tools release: cris-dist-1.60,
Hans-Peter Nilsson
Updated requirement question for cris-dist RPM:s: RH 7.3 ok?,
Hans-Peter Nilsson
network boot problems,
Johan Bernspĺng
Debian packages for cris-dist-1.60 now available,
Hans-Peter Nilsson
Cross compiling linux source tarballs.,
Randy Graham
NFS on the LX IDE,
Anthony Russello
memory to memory transfer,
Jonathan Makofske
how to use i/o ports on devboard82,
"Daniel Würfel"
AXIS 2420 PPP Packet Forwarding,
jecottrell
starting up using busybox v1.0.0-rc3,
mschapira
Problem with Multicast.,
Antonio Redondo Mozos
Problems with install script.,
Steve Terry
Re: Thread-capable gdbserver now available on developer.axis.com,
Jeremy Turner
Similar problem with ktest,
Steve Terry
data from external DMA,
Johan Bernspĺng
problem with libcrypt.so,
(Walter Harms)
How to cross compile TCL for axis devboard.,
Randy Graham
RE: peek / poke command,
Mikael Starvik
DEVBOARD_LX vs. MCM software,
girerd
external DMA with CSP4 peripheral,
girerd
Reading Registers from CGI script,
Jonathan Makofske
Out of Memory,
Philippe Frossard
solution: busybox1.0 with devboard_82,
(Walter Harms)
RE: Serial Driver,
Mikael Starvik
Re: Problem booting ETRAX100LX -- /mnt/flash ; jffs2_scan_eraseblock; magic bitmask,
Steve Terry
USB WLAN/802.11 adaptor?,
Neil Stewart
Limit Ftp / Telnet and Web connection ...,
Frossard Philippe
Newbie question on kflash,
Theresa Gamboa
Changing MAC adress, IP address on-the-fly?,
Jonathan Makofske
Help with R_SDRAM_CONFIG,
Bryan Hackney
firmware upgrade & agetty conflict,
Stefano vicenzetto
Console on an serial usb,
Marco Natali
GPIO driver API or sample code?,
Steve Terry
GPL,
John Bindby
- <Possible follow-ups>
- RE: GPL,
Mikael Starvik
USB client?,
Ronny L Nilsson
gcc-cris sprintf bug?,
Pieter Grimmerink
Problems with usb drivers,
Marco Natali
driver question,
Mikael Ainalem
dev-etrax mail history.,
Steve Terry
ptable and MCM 4+16(22545),
Andrew
Reducing image to fit into internal flash.,
Steve Terry
R_SDRAM_TIMING& 4+16 dafault value,
Andrew
Linker error with cross compiler,
Kiran Kumar R V L
Flash writing problems on Developer board LX IDE,
Kiran Kumar R V L
device driver loaded at boot,
Johan Bernspĺng
Soldering profile for Air Vac station,
Sam Silverstein
kernel 2.6,
Marco Natali
[no subject],
Andan Andan
gphoto2,
jct42
Change in DHCP default setting for 82/83,
Mikael Ainalem
old uC-libc compilation issues,
ShackaN
AXIS RoHS compliance,
Omer Zeharhary
Change size of file buffers,
Arne Bockholdt
ipsetd script,
Bernhard Roessmann
Rs485 and serial port 3,
Mario Viara
flash issue - top level makefile,
Mark Richards
rp-pppoe,
Nick B
no space left on device,
Stefano vicenzetto
Strange GDB behaviour with KGDB,
Marco Matarazzo
MCM 4+16,
girerd
problems installing the devboard 82 sdk,
Mark Meyer
GPIO speed,
Bernhard Roessmann
EEPROM driver,
Pieter Grimmerink
4+16MCM startup problem,
jct42
[no subject],
Kiran Kumar R V L
problem building full image (error during apps/samba),
Kiran Kumar R V L
News about kernel 2.6.10 ?,
Marco Natali
problems testing kernel image on axis board,
Kiran Kumar R V L
Using ttyS0,
wink
ATAPI error during mounting of CD-ROM / DVD-ROM,
Kiran Kumar R V L
Error -3 while decompressing,
the wretch
library ?,
Jayson Ingels
Don't receive Multicast,
Antonio Redondo Mozos
settings bits on parport,
Johan
installing MCM software with CRIS R60/1.60,
Sam Silverstein
boot mode on device server 83?,
Nick B
iptables problems,
Nick B
4+16 MCM Dead or alive?,
Mikko Saarnivala
GPIO pins?,
farukk
device server performance issues,
Nick B
JFFS on MCM,
Sam Silverstein
[SPAM] Your Refill is Ready to Ship,
Canadian Viagra, Cialis, Soma, Valium...
Behavior as flash becomes exhausted.,
Randy Graham
Does anybody working already on USB device mode "gadget" implementation?,
Nick Maximov
temperature range,
walter harms
Autoconf and Automake.,
Marco Matarazzo
Building kernel with bluetooth for devboard_82,
Joe Sloan
Hardware support for USB device mode, A-to-A cable on devboard,
Nick Maximov
LOCALS sections,
Joe Sloan
rc*.d basic question,
girerd
Problems compiling pthread.h in C++,
G.Worley
Etrax Framebuffer,
Bernhard Roessmann
screw makefile ?,
walter harms
basic question linux librairies and images,
girerd
SRAM driver?,
Sam Silverstein
Kernel panic - usb,
Joe Sloan
External DMA problems,
Wojciech Zabolotny
ktest works, but kernel panic after kflash - tunning hcid,
Joe Sloan
Problem with eth0/eth1 link,
Ajay Kolambekar
Problem related with the disk space,
Ajay Kolambekar
ifaddrs.h,
Jayson Ingels
Problem with an usb to RS232 converter,
"Daniel Würfel"
netpbm - out of memory,
Nigel Carpenter
rescue not build: (was srewed makefile),
walter harms
Install Failure,
Dan Nelson
Devboard 83 mounting screws,
cedric.stevens
checking images,
walter harms
Still Fails Install,
Dan Nelson
synchronous serial modeselection,
also
Threads receiving SIGTERM,
Ajay Kolambekar
Linux 2.6 support?,
Development
Questions about the MCM 4+16 bus interface,
Sam Silverstein
Bus interface questions,
silver
Kernel panic: Attempted to kill init!...,
Ben Jafari
Rescue image - how to?,
Mark Richards
USB-SCSI emulation problem,
Marco Matarazzo
Running Snmpd on Axis,
Ben Jafari
Serial and Parallel Ports???,
Eric Fernandez
Reduce serial port latency?,
Randy Graham
Cannot Load Code,
Dan Nelson
Internal Connector for pin headers,
Eric Fernandez
Adding a partition,
Hannes Mayr
Devboard 82 5 VDC,
Joe Sloan
flash, flashit or flashitall utility needed,
Neal Baer
pppd trouble,
walter harms
from MCM2+8 to MCM4+16,
wretch
Support for the MCM 2+8 and 4+16,
francois.p.gallichand
devboard82 SDK on MCM2P8 with no external memory,
girerd
still pppd trouble,
walter harms
Compiler bug in cris-gcc release R60/1.60,
Eric Dönges
How to handle input through serial port 2,
Ben Jafari
pppd and ip-up,
Dan Nelson
r.e. from MCM2+8 to MCM4+16,
bryanmcm
smtpclient: email trouble.,
Robert Hibberdine
Odd word addresses on the interface bus,
Sam Silverstein
TFTP,
Henrik Löfgren
[no subject],
Dhaval Shah
Problems with a 4+16 MCM device,
Mikko Saarnivala
pppd dialin trouble,
walter harms
flashing issue,
Jeremy.Thompson
Developer board and device server update,
Jens Johansson
SDK Patch for Linux 2.6?,
Eric Fernandez
make mgetty compile,
walter harms
Device driver and watchdog in R1.92,
francois.p.gallichand
Getting Started Guide typo,
John Bindby
Sending E-Mail from a Devboard82,
"Daniel Würfel"
info on moving from MCM2+8 to MCM4+16,
Mikael Ainalem
Re: Sending E-Mail from a Devboard82 - Porting Fetchmail,
"Daniel Würfel"
Small C Compiler,
Bernhard Roessmann
Small mechanical problem - star screws on devboard 83,
Joe Sloan
devboard_82 install error.,
Randy Graham
setserial low_latency?,
Randy Graham
Isdn modems for Devboard.,
Robert Hibberdine
Bootloader problem,
jano
Fortran cross,
Matthew Fowler
crosscompiling howto,
walter harms
NOP_DI,
jano
developer board release 2.00,
Mikael Ainalem
ttyS0 problem with select-function,
"Daniel Würfel"
Delayed reading from serial device,
Udo Giacomozzi
Re: Delayed reading from serial device,
cedric.stevens@oss.co.za
<Possible follow-ups>
Re: Delayed reading from serial device,
bob.hibberdine
Simple Parallel Port IO question...,
Eric Albers
interrupt priority,
Randy
Increasing flash and RAM size,
Daniel Fraile Vergel
axis compiler build on PPC arch,
Anthony Russello
utelnetd configuration,
ccoughlin
RE: Socket ioctl,
Lars Viklund
support for kernel 2.6.11,
Eric Fernandez
Why is the C++ so huge?,
Vladimir Boroda
Increasing security on the flash file system,
Udo Giacomozzi
USB1.1 PHY,
habib_at_betula
gpiog input/output,
Petter Hofverberg
setting/clearing GPIO bits at once,
Udo Giacomozzi
SFTP client locking up,
Josh Baird
New compiler tools release: cris-dist-1.61,
Hans-Peter Nilsson
problem adding file,
Petter Hofverberg
ttyBTx and ttyBTC,
habib_at_betula
path mtu discovery,
phil
Axis 83 server,
prabu venkat
problem flashing board,
Petter Hofverberg
bluetooth support visible in kernel menuconfig,
habib_at_betula
Kernel panic when flashing devboard82 with kernel 2.6.11,
"Daniel Würfel"
MCM 4+16 boot problem with SDK R2_0_0,
Chris Poole
flashit message,
habib_at_betula
Problems starting Linux on own card,
Nickolay Maximov
Kernel panic after flashing devboard82 with kernel 2.6.11,
"Daniel Würfel"
flash failures,
Phil Sutter
counting on serial port,
walter harms
Unable to ping boards after arp -s,
Philippe Frossard
COM1 not reading,
brenokastrup
Problem on booting from serial port....,
Eric Fernandez
Strange behavior after booting kernel 2.4.26,
habib_at_betula
help installing dropbear,
Petter Hofverberg
problem linking dmx4linux 2.5,
jeroen visser
oops message when using kernel 2.6.11!!!,
Eric Fernandez
Where is the new 'devboard 2.00" SDK mentioned on the home page?,
Randy Graham
devboard R 2.00 kernel menuconfig crashes.,
Randy Graham
Debug port changes between 2.4.26 and 2.4.29,
Simon Posnjak
How to build kernel with devboard 2.00?,
Randy Graham
uClibc && libstdc++,
Pieter Grimmerink
kernel 2.6 config,
Pieter Grimmerink
unable to build devboard-R2.00 for devboard_lx,
mschapira
Flash memory size is exceeded in R2.2.0 (linux-2.4.26),
fjmartin
building and using a shared library,
mschapira
net-snmp-5.2.1,
Ben Jafari
OOPS: CF-635 USB LCD using: ftdi_sio usbserial modules,
Ronnie Pettersson
- Re: OOPS: CF-635 USB LCD using: ftdi_sio usbserial modules,
Henrik Eriksson
- Re: OOPS: CF-635 USB LCD using: ftdi_sio usbserial modules,
Ronnie Pettersson
- Re: OOPS: CF-635 USB LCD using: ftdi_sio usbserial modules,
Ronnie Pettersson
- Re: OOPS: CF-635 USB LCD using: ftdi_sio usbserial modules,
Henrik Eriksson
- Re: OOPS: CF-635 USB LCD using: ftdi_sio usbserial modules,
Ronnie Pettersson
- Message not available
- Message not available
- Re: OOPS: CF-635 USB LCD using: ftdi_sio usbserial modules,
Henrik Eriksson
- Re: OOPS: CF-635 USB LCD using: ftdi_sio usbserial modules,
Ronnie Pettersson
- Re: OOPS: CF-635 USB LCD using: ftdi_sio usbserial modules,
Ronnie Pettersson
- Re: OOPS: CF-635 USB LCD using: ftdi_sio usbserial modules,
Marco Matarazzo
- Re: OOPS: CF-635 USB LCD using: ftdi_sio usbserial modules,
Marco Matarazzo
- Axis build system for R2,
Marco Matarazzo
- Re: OOPS: CF-635 USB LCD using: ftdi_sio usbserial modules,
Ronnie Pettersson
- How does one blick LEDs?,
Vladimir Boroda
- Re: How does one blick LEDs?,
wretch
<Possible follow-ups>
RE: OOPS: CF-635 USB LCD using: ftdi_sio usbserial modules,
Mikael Starvik
2100/206W questions,
HH
Can't open /dev/rtc with R2_00, 83 + ?,
Randy Graham
FTDI USB-RS232 converter and usb hub problem,
"Daniel Würfel"
Developer 82+ SW installation problems!,
Matthias Rötzer
Kernel panic when booting devboard82 with kernel 2.6.11,
"Daniel Würfel"
FTP image flash no longer works?,
Randy Graham
- Re: FTP image flash no longer works?,
wretch
- Re: FTP image flash no longer works?,
Randy Graham
- Re: FTP image flash no longer works?,
Ronnie Pettersson
- RE: FTP image flash no longer works?,
Mark Richards
- Re: FTP image flash no longer works?,
Randy Graham
- Re: FTP image flash no longer works?,
Andrew
- Re: *SPAM* Re: FTP image flash no longer works?,
Eric Dönges
- Re: *SPAM* Re: FTP image flash no longer works?,
Jonas Holmberg
- Re: *SPAM* Re: FTP image flash no longer works?,
Andrew
- Re: *SPAM* Re: FTP image flash no longer works?,
Jonas Holmberg
- Re: *SPAM* Re: FTP image flash no longer works?,
Marco Matarazzo
- Re: *SPAM* Re: FTP image flash no longer works?,
Jonas Holmberg
- RE: FTP image flash no longer works?,
David Whittaker
- RE: FTP image flash no longer works?,
Andrew
build mkfs.jffs2,
also
How to kick off tasks on 82,
Ben Jafari
How stable is R2_00 ?,
Randy Graham
Ethernet Transceiver Connections,
Gabriel Siftar
How to change hardware parameters in fimage ???,
Eric Fernandez
MCM 4+16 problems with SDK R2_0_0 - success story,
Sergey B. Khvatov
Problem booting a custom board....,
Eric Fernandez
libgphoto, gphoto2 and libptp,
cedric.stevens@oss.co.za
Problem with internal flash,
Simon Posnjak
Memory bus peek/poke utility?,
Mike Ciholas
gcc-cris parse error,
cedric.stevens@oss.co.za
io_remap_page_range -> ...,
Simon Posnjak
RE: How does one blick LEDs?,
Mikael Starvik
accessing internal register,
Eric Fernandez
RE: Any way to halt or power-off,
Mikael Starvik
Problem compiling dash shell,
Borja Rodríguez Diliz
New driver for cris,
Hinko Kocevar
16550 UART serial driver needed,
Mike Ciholas
http on port 80,
archi12
swap space,
cedric.stevens@oss.co.za
SDRAM Configuration,
Stefan Giacomozzi
CF compact flash schematics available !?,
Matthias Rötzer
COM2 Configuration,
brenokastrup
regarding mail with subject "vorbildliche action",
Jeroen Visser
Need your help about how to build a embeded application for AXIS 241Q,
Sun Tomy
Need your help about how to build a embeded application for AXIS 241Q.,
Sun Tomy
Bluetooth dongle.,
Fabrizio Sciarra
http://developer.axis.com/download/ -> Forbidden ???,
Andrew
Synchronous slave mode and multiword frames,
Christer Weinigel
image to large!,
Eric Fernandez
SDK 2.00 + telnet on windows,
Bernhard Roessmann
GPIO g1 - g4,
Hinko Kocevar
RE: Typo in ELF_DATA define in asm-cris/elf.h,
Mikael Starvik
ioctl question about sync_serial,
habib.bouaziz-viallet
Hardware problem with USB Ethernet?,
Vladimir Boroda
TCPDUMP ?,
Eric Fernandez
How to preserve /var/directories after reboot?,
Ben Jafari
Applying net.eth0 changes,
Robert Hibberdine
VFTPD,
Zavaleev Igor
scratchbox,
walter harms
gpio pins,
Hinko Kocevar
etrax i2c,
Marco Matarazzo
RE: etrax i2c, second act,
Mikael Ainalem
Calculate flash life.,
Randy Graham
Sockets,
Dan Nelson
[att. Phil Sutter] compiling tcpdump for ETRAX,
Udo Giacomozzi
running e100boot twice without rebooting target in between,
Pieter Grimmerink
boot_linux problem,
Alexandre Poltorak
colour lcd on etrax,
Udo Giacomozzi
RE: DQ5,
Mikael Starvik
- <Possible follow-ups>
- RE: DQ5,
Bernhard Roessmann
client crashing,
brenokastrup
struct alignment with gcc-cris,
Andy
make menuconfig crash,
jeroen visser
Gateway not getting set for eth0 ?,
Randy Graham
scattered printout on console,
Hinko Kocevar
sync serial woes,
Hinko Kocevar
Node totlen on flash (0xffffffff) != totlen from node ref (0x00000044),
Eric Fernandez
fstat and fstat64 in uclibc,
Simon Posnjak
cris-dist-1.6.1 broken,
richard
fox etrax SDK on mandrake 9.1 question,
Helmut Hissen
SPF and mailing lists,
Simon Posnjak
Etrax100LX Built-in Interfaces,
habib.bouaziz-viallet
axis connecting,
brenokastrup
Strange,
habib.bouaziz-viallet
RE: Make error - will not create hard link,
Mark Richards
pmake problem (compiling dash),
Helmut Hissen
Bad bad bad... Kernel crash when not quoting net.eth0 and net.eth1 entries,
Mark Richards
More on kernel crash with eth1,
Mark Richards
SV: LF/CR etrax100lx,
Mikael Starvik
SV: More on kernel crash with eth1 (request for assistance),
Mikael Starvik
RES: axis connecting,
brenokastrup
Trouble getting SDRAM working!,
Udo Giacomozzi
[patch] netconsole,
Hinko Kocevar
A solution for the Linux 2.6 USB problems,
Mikael Starvik
SDRAM resistors: required or not?,
Udo Giacomozzi
SDRAM as peripheral chip?,
Thomas Brehm
RE: Anyone know what this means?,
Mark Richards
Instructions for Axis 83+ Device Server...,
Jay Shah
hotplugging in cris,
Hinko Kocevar
Graphic Displays,
Dan Nelson
Partition resizing how to?,
Mark Richards
Easy C++ help,
brenokastrup
fox board gone silent,
Jeroen
RES: Easy C++ help,
brenokastrup
support of Micron chips (newbie),
Peter Apian-Bennewitz
Synch serial DMA,
Hinko Kocevar
Flash boot problems,
Hannes Mayr
libupnp respource file,
Mark Richards
Another usb-related kernel crash,
Mark Richards
Typo error in Axis hardware documentation and problems on gpio g28 g29 out,
Roberto Asquini
Remote upgrade via http,
Mark Richards
Fox-Board and SDK R2.00,
Robert Parusel
Rescue devboard 83+,
Mark Richards
New compiler tools release: cris-dist-1.62,
Hans-Peter Nilsson
mmap() kmalloc'd memory,
Jachym Holecek
Network interface eth0 stopped working,
wretch
lowest level interrupts,
Udo Giacomozzi
install SDK on a 64 bit system,
nereal
Hangup during flash write, anyone?,
Jachym Holecek
USB Freeze,
szabot
Compiling with uClibc,
Daniel Fraile Vergel
unittest-verbose? What's that??,
Mark Richards
Devboard R-2: strange problem,
Mark Richards
dirent.h missing,
Pieter Grimmerink
SDK R2.00 error compliation on the SUSE 9.3 host,
ndaher
Readonly filesytem and /dev,
Mark Richards
SDK devboard-R2_00,
also
crashme crashes devboard 82,
Hĺkan Johansson
- RE: crashme crashes devboard 82,
Mark Richards
- <Possible follow-ups>
- RE: crashme crashes devboard 82,
Mikael Starvik
- RE: crashme crashes devboard 82,
Mikael Starvik
- RE: crashme crashes devboard 82,
Hĺkan Johansson
- RE: crashme crashes devboard 82,
Mikael Starvik
- RE: crashme crashes devboard 82,
Mikael Starvik
- RE: crashme crashes devboard 82,
Mikael Starvik
- RE: crashme crashes devboard 82,
Mikael Starvik
- RE: crashme crashes devboard 82,
Mikael Starvik
- RE: crashme crashes devboard 82,
Mike Ciholas
Building kernel modules with 2.6,
Marco Matarazzo
new SDK devboard-R2_00,
also
Serial DMA irq warnings,
Andy
RE: Building kernel modules with 2.6 [follow-up],
Mikael Starvik
SDK Install Error,
Dan Nelson
Kernel Builds,
Dan Nelson
C++ and cris compiler,
Massimo Piovera
Debian packages for cris-dist-1.62,
Hans-Peter Nilsson
Boot from USB?,
Randy Graham
Makefile with gnuuclibc,
Marco Matarazzo
i2c driver,
Andy
Dynamic Web Content,
Dan Nelson
Some Newbie Questions,
Herwig Huber
USB problems, again,
Marco Matarazzo
license question,
Udo Giacomozzi
Re: AW: Some Newbie Questions,
Christian Hoffmann [Niechoj electronic GmbH]
dropBear simple doubts,
Breno Tiberio
reading from serial port blocks after repeated usage,
Petter Hofverberg
Cannot open /dev/rfcomm0 and /dev/ttyUB0,
Fahad Khowaja
ETRAX 1000Lx,
Robert Parusel
free serial flash utility for custom ETRAX boards (not only),
Udo Giacomozzi
Use a USB Hub for developer 82+,
Fahad Khowaja
Perl for Axis Device Server,
Chris Gurtler
Dealing with blocking sockets,
Naved Aziz
Kernel,
Dan Nelson
- <Possible follow-ups>
- RE: Kernel,
Mikael Starvik
- kernel,
hinko.kocevar@cetrtapot.si
pppd is not talking to me...,
Herwig Huber
compiling modules,
Gerd Dietrich
Using different Ethernet PHY with the ETRAX100LX,
Zhuorong Deng
openswan ipsec,
Phil Sutter
#include header files,
Dan Nelson
flash access time,
walter harms
ram size question,
walter harms
How to increase throughput while communicating over a serial link,
Ajay
Video Frame Buffer Devices,
Dan Nelson
missing char on serial port,
Eric Fernandez
flash problem ?,
walter harms
Fresh Install Fails,
Dan Nelson
ftp client,
Robert Hibberdine
problems while compiling aconf, mconf and dash,
Matthias Rötzer
R2_00 + Linux 2.6: Some helpful hints,
Dave Van den Eynde
format USB flash drive??,
josh_baird
Problem wikth R2_00 fimage on devboard82,
Robert Hibberdine
devboard_83+ ethernet problems,
Vladimir Boroda
Including your own apps in the toplevel makefile (R2_00),
Bob Hibberdine
Board is getting hanged,
Ajay Kolambekar
[re: ncluding your own apps in the toplevel makefile (R2_00)],
Bob Hibberdine
pmake problem (distributions different from debian,fedora),
fabio.sfuncia
Kernel panic - not syncing: No init found.,
Philippe Frossard
staircase effekt while booting,
walter harms
How to set high baudrate in serial port ?,
Ermes Viani
Bluetooth - hciconfig timeout,
Marco
I: Kernel panic - not syncing: No init found.,
Massimo Piovera
SMB client on devboard..,
Bob Hibberdine
Kernel write error: bad flash?,
Randy Graham
Disable debug port,
Philippe Frossard
smbmount on devboard 82 works..,
Robert Hibberdine
open: No such device or address,
Philippe Frossard
Link Fails,
Dan Nelson
arch/cris/kernel/head.S,
Jachym Holecek
Direct memory access in kernel module,
Udo Giacomozzi
Build Problem,
Dan Nelson
2.4 Or 2.6,
Dan Nelson
Need help with SMSC-PHY,
Pflug Christian
Lost eth1.,
Randy Graham
Long request header,
archi12
Device 82/83 discovery on a network.,
Randy Graham
flashing an image over ftp,
mschapira
[SPAM] Watchdog timer - reset time,
Brendan See
IPSEC - OpenSwan,
phil
ptablespec for MCM4+16 (from MCM2+8),
Ricky Luppino
Busybox,
Dan Nelson
Flash over Internet,
ccoughlin
Installing Files And Software,
Dan Nelson
SDRAM problem,
Thomas Brehm
MCM4+16 Ethernet Link LED,
Ricky Luppino
Developing for many board types,
Robert Hibberdine
Routing Problems,
Dan Nelson
/etc,
Dan Nelson
- <Possible follow-ups>
- RE: /etc,
Karl-Johan Perntz
eth1 under stress,
Dave Van den Eynde
Lithium battery on the developer board LX,
Philippe Frossard
eraseflash problems,
Akshay Adhikari
Bluetooth,
Marco
nmi handler,
Eric Fernandez
SDK errors on make,
tjue1
Make Images Is Extremely Slow,
Dan Nelson
Numeric keypad,
Emiliano Muńoz Vicente
TUN device support,
Brendan See
Synchronous port in slave mode,
Christer Weinigel
long header,
archi12
flashing image on multiple board,
Eric Fernandez
SNMP agent implementation,
Marco
ttyS3,
Dan Nelson
Serial Port Echo,
Dan Nelson
question on watchdog,
Eric Fernandez
Lost eth1 port.,
Randy Graham
Alignment complier options,
Brendan See
'make kernel' error with devboard_82,
Randy Graham
PXE for the Axis 83+?,
Wayne Feick
Write errors and warnings in /var/log/messages file.,
Randy Graham
New SDK release (2.01),
Karl-Johan Perntz
ipsetd and dhcp,
habib.bouaziz-viallet
RTC resets on reboot,
Daniel Bray
SFTPCLIENT,
Breno Tiberio
etrax100boot over USB network adapter,
Pieter Grimmerink
devboard-R2_01-distfiles.tar.gz == distfiles-R2_01.tar.gz ?,
John Bindby
crosscompile gnupg-1.4.2,
Walter Harms
USB problems with 82+ and low speed devices ?,
rimas
FOX: password issue and partition flash info,
Aldo Seb
Possible bug in SDK 2.01 !?,
Matthias Rötzer
mass-storage dongle on usb,
habib.bouaziz-viallet
serial port strangeness ...,
rimas
RE: password issue and partition flash info,
Karl-Johan Perntz
AW: Possible bug in SDK 2.01 !?,
Matthias Rötzer
Note about scp and devboard SDK,
John Bindby
LD_LIBRARY_PATH for us with CGI in boa,
John Bindby
RE: Shared library won't install,
Mark Richards
IDE on 82+ developer board,
michael.firth
Loading kernel modules on Etrax,
michael.firth
/dev/console behavior on 2.6 kernel ?,
rimas
RE: readline and termcap,
Karl-Johan Perntz
I2C link problem,
debbo82@libero.it
Peripheral on ETRAX system bus,
Mark Warburton
DSP STA013 on Sync Serial,
habib.bouaziz-viallet
ftpd problem,
walter harms
How to setup an interrupt handler in Axis Boards,
Ermes Viani
Sync serial port pins on devboard_lx,
habib.bouaziz-viallet
MCM dead stock?,
Barkaszi Mihaly
Eth1 not enabled?,
Randy Graham
GPIO Dir in kernelconfig,
habib.bouaziz-viallet
devboard-R2_01 Ncurses libraries,
Breno Tiberio
__get_free_pages() troubles,
Spectr
how to set custom baudrate for serial port,
Lapo TIN
mv bug !?,
John Bindby
Installing Busybox Changes,
Dan Nelson
GCC 4,
Dan Nelson
ipsec-tools,
Sergio Dominici
83+ flash recovery,
Brad House
Eth0 responds to pings to Eth0 and Eth1 IP addresses?,
Randy Graham
Port G I/O,
Dan Nelson
unsubscribe dev-etrax martin.landolt@exor.ch,
ur
events/0,
John Bindby
Yet another question about GPIO,
habib.bouaziz-viallet
Wiki announcement,
Karl-Johan Perntz
Java/JVM on Etrax?,
Eric Albers
New compiler tools release: cris-dist-1.63,
Hans-Peter Nilsson
JPEG problems with boa web server,
Borja Rodríguez Diliz
telnetd bug,
John Bindby
Forth on 100LX?,
otc
Does anyone know these values??,
Matthew Fowler
Porting Java kvm,
Ruud Vlaming
DevboardLX Flash size too small for "devboard-R2_00 / R2_01"?,
Stefan Schober
Problem on Sync serial,
habib.bouaziz-viallet
Using the readbits/setbits tool for GPIO.,
Adam
flashing SDK2.01 problem,
Breno Tiberio
NFS rootfs,
hinko.kocevar@cetrtapot.si
A configure script and gcc-cris,
Matthew Fowler
Interfacing STA013 results,
habib.bouaziz-viallet
Dual ethernet device by connecting 2 devboard_lx,
szabot
kernel modules,
hinko.kocevar@cetrtapot.si
Yet another WiKi page,
habib.bouaziz-viallet
Devfs for Etrax,
michael.firth
sync serial frame output on LX100,
hinko.kocevar@cetrtapot.si
Serial 0 falling back to non-DMA mode ???,
Christian Hoffmann [Niechoj electronic GmbH]
RE: one more,
Karl-Johan Perntz
System Bus Interface,
habib.bouaziz-viallet
unresolved symbols,
Andrea Partinico
Problem with image from new SDK 2.01,
Johan Andersson
SDK 2.01 on Debian.,
Robert Hibberdine
RE: Reducing Executable Size,
Mikael Starvik
can't access tty; job control turned off,
Aldo Seb
Bluetooth problems,
Nilsson, Markus
2.6 interrupts,
Randy
Issues with the flash application,
Johan Andersson
Group E signals,
hinko.kocevar@cetrtapot.si
DMA-SERIAL 485 ,ETRAX 100LX,
Iztok Fekonja
rdate,
Breno Tiberio
few more,
Breno Tiberio
Using the Paralellport,
Adam
Problem with building image,
bernard ghestin
SSER without frame strobe,
hinko.kocevar@cetrtapot.si
How to compile kernel modules for Etrax?,
Jonas A
Inner working of the toolchain build process?,
Ronny L Nilsson
Building bluez,
Jonas
installing files on devboard-R2_01,
Petter Hofverberg
RS485 serial over DMA , receiving,
iztok
VGA Controller,
habib.bouaziz-viallet
ETRAX FS,
szabot
memory allocation fails, I think, or kernel bug??,
Matthew Fowler
devboard 82+: mgetty,
Patrick Gionet
checksum error on flash of fimage,
Andrew Jennings
RE: Error -5 while decompressing,
Karl-Johan Perntz
Readind RS485 serial over DMA,
iztok
Statusled of for 5 min when boot,
Ronny L Nilsson
FW: Odgovori: RE: RS485 serial over DMA , receiving,
Mikael Starvik
Axis 2120 image update,
Erik Weissenborn
Boa login,
gwithrow
network flash hangs,
Petter Hofverberg
lpthread,
Jonas
aquire mac range ?,
walter harms
SCP script,
Breno Tiberio
Integrating a Prism2 based 802.11 radio with Etrax,
phil
SSH script howto,
walter harms
Board refuses to boot,
wretch
Serial console login,
Jeremy Turner
Raise/lower RTS problem,
John Bindby
Increase stack size.,
Randy Graham
How to build gdbserver?,
Randy Graham
upgrades of SDK on remote devboards,
Petter Hofverberg
Adding user for FTP,
Andrew Jennings
No sync serial driver in 2.6?,
Ronny L Nilsson
Modify hard-reset behavior.,
Randy Graham
Kernel 2.6 serial fast timer options,
John Bindby
DS2401,
Benjamin Klimpel
Power consumption MCM?,
Ronny L Nilsson
linux embedded programing,
walter harms
PPPoE,
Breno Tiberio
RE: USB device drivers,
Mikael Starvik
System unresponsive, dynamic linker failures,
John Bindby
umount/remount usb mass storage,
Habib Bouaziz-Viallet
MMAP & SDRAM,
Thomas Brehm
DMA based ECP driver forETRAX 100LX,
Benjamin Klimpel
PortA Interrupt Handling Driver,
Andrea Partinico
RE: Changing HZ value,
Mikael Starvik
Re:Changing H2,
Robert Hibberdine
start-stop-daemon and stdout and stderr,
Philippe Frossard
Iptables problem; can't find nat table,
willie wortel
Starting pppd from user login,
Patrick Gionet
[Axis Communications] December 2005 - Technology eNewsletter,
Jens Johansson
FS based board,
Emiliano Muńoz Vicente
Image exceeds alignment, but same file copies to live system,
Mark Richards
Re: Image problem,
willie wortel
RE: Image problem > GOT IT!,
willie wortel
Request for techincal information on serial ports,
Fulvia
ld cant find -lz (zlib),
Mark Richards
devboard 2.01 / glibc issues,
Stefan Schober
compiling smbmount,
willie wortel
Flash1 & flash2 partitions size,
Habib Bouaziz-Viallet
Initial compiler tools release for ETRAX FS: cris-dist-1.63-v32,
Hans-Peter Nilsson
Default pthread schedule policy.,
Randy Graham
Creating kimage in fimage,
hinko.kocevar@cetrtapot.si
ftp /flash_all - netout: broken pipe,
Philippe Frossard
SDK Install Errors,
Dan Nelson
tmpfs,
Philippe Frossard
Download kernel image FROM board,
Matteo
Still unsure of mkptable,
Ronny L Nilsson
Fasttimer documentation wanted,
Ermes Viani
Compiler bug?,
Simon Posnjak
rs485 serial port configuration,
Christophe GIAUME
flashing the board does not work,
mschapira
Chapter 20?,
Eric Albers
Rapidly flashing LEDs,
Mark
Activating framebuffer support in kernel,
Udo Giacomozzi
devboard error,
hinko.kocevar@cetrtapot.si
mmap problems (accessing wrong physical address),
Udo Giacomozzi
<Possible follow-ups>
RE: Re[2]: mmap problems (accessing wrong physical address),
Mikael Starvik
RE: Re[4]: mmap problems (accessing wrong physical address),
Mikael Starvik
RTC time drift,
hinko.kocevar@cetrtapot.si
MCM 4+16 Ethernet Transceiver,
Rick Luppino
unsubcribe,
Adam
- <Possible follow-ups>
- unsubcribe,
teppi4u@gmail.com
(kein Betreff),
Paul Pridt
How to unsubscribe...,
Karl-Johan Perntz
[no subject],
Habib Bouaziz-Viallet
PCB microstrip width,
Habib Bouaziz-Viallet
Compiling Kernel with CONFIG_BINFMT_MISC=y,
Matthias Rötzer
Kernel AI/O,
tjue1
Size of file is different from "apps" to "target" ...,
Philippe Frossard
Configuring for custom board...,
michael.firth
MCM4+16 Parallel Port,
Ricky Luppino
linux >2.6.12,
Andy
Power supply for ETRAX 100LX,
Eric Albers
Known libpthread problems?,
Hannes Mayr
devboard-R2_01 small problem with configure -u,
Tomasz Motylewski
image with uid,
walter harms
Serial port programming,
Eric Albers
Serial port ttyS2...,
Eric Albers
Threads...,
Eric Albers
FTP Flash Upgrade Failure - Step 2,
Vladimir Boroda
Using Axis SDK under VMware player,
Ermes Viani
ttyS2 problems,
Eric Albers
Warning: "csum_partial" undefined!,
Andy
AW: Compiling Kernel with CONFIG_BINFMT_MISC=y,
Matthias Rötzer
ethernet throughpout and other matters,
Mickaël FORET
https, openssl and stunnel,
Matthias Rötzer
Interfacing problems with external companion chip (EPSON LCD controller),
Udo Giacomozzi
test proggy,
hinko.kocevar@cetrtapot.si
MCM4+16,
Mickaël FORET
Possible memory leakage in the 2.4.26 kernel?,
Christian Hoffmann [Niechoj electronic GmbH]
MCM 4+16 flash lost,
Iztok
Use of watchdog,
RIEM-VIS Ruud
The system is slow with IDE enabled,
Giovanni Giovannozzi
Latest developer board (MCM) power usage,
tjue1
Serial port hanging...,
Eric Albers
Serial Port issue,
Eric Albers
enable parallel port,
Pin Yang Ang
Compiling kernel question,
Eric Albers
pmake?,
Eric Albers
Static linking of pthreads,
Eric Albers
Re: pmake?],
Roberto Asquini
Bad documentation on Axis developer server?,
Eric Albers
[OT] hire a linux embedded developer,
Roberto A. Foglietta
Error compiling,
Eric Albers
AXIS-82 no parallel port option?,
Pin Yang Ang
How to add a library,
Eric Albers
AXIS + shared-libs,
iztok
Device Server Platform question...,
Eric Albers
Default images for Etrax LX100...,
Eric Albers
Power supply on serial port,
Eric Albers
Download image from board?,
Eric Albers
MTBF,
mickaël foręt
kernel 2.4.26 bug: /proc/scsi/scsi,
walter harms
Enabling RS485 (ttyS3) under SDK R201.,
Robert Hibberdine
scripting languages for devboards,
Robert Hibberdine
reboot problem after fimage,
Pin Yang Ang
can't reboot after fimage,
Pin Yang Ang
TCP-IP,
Dan Nelson
PHY problems using MCM in place of 100LX,
michael.firth
Simulating the ETRAX LX100 MCM 4+16 using SID,
Simon Clubley
two LEDs flash rapidly --- how to fix ?,
Pin Yang Ang
Amps pulled by Etrax?,
Eric Albers
AXIS-82 or AXIS-82+,
Pin Yang Ang
setbits on AXIS-82,
Pin Yang Ang
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found.,
Steve Terry
- Re: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found.,
Udo Giacomozzi
- Re: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found.,
Pieter Grimmerink
- Re[2]: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found.,
Udo Giacomozzi
- Re: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found.,
Pieter Grimmerink
- Busybox update,
Mark Richards
- Re: Busybox update,
walter harms
- Re: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found.,
Jonas Holmberg
- Re: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found.,
Pieter Grimmerink
- Re: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found.,
Jonas Holmberg
- Re: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found.,
Pieter Grimmerink
- Re: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found.,
Jonas Holmberg
- Re: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found.,
Pieter Grimmerink
- Re: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found.,
Johan Adolfsson
- Re: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found.,
Pieter Grimmerink
- Re: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found.,
Jonas Holmberg
- Re: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found.,
Pieter Grimmerink
- <Possible follow-ups>
- RE: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found.,
Mikael Starvik
- RE: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found.,
Mikael Starvik
- Re: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found.,
Pieter Grimmerink
`if_par_0' and `if_par_1' errors,
Pin Yang Ang
[ANN] KLone web application framework ported to AXIS Cris platform,
Stefano Barbato
Failed to boot after Fimage flashing,
pbucolo
GPIO (select or poll),
Eric Fernandez
AXIS-82 gpiog pin number,
Pin Yang Ang
eth1 green led,
ed
Is the I2C driver for 2.4.X kernels broken ?,
Eric Dönges
Connecting irda to USB under 2.6 kernel,
Simon Posnjak
ETRAX-FS Memory Configuration,
Ricky Luppino
Etrax flash configuration,
michael.firth
New Linux 2.6 USB driver for ETRAX 100LX,
Karl-Johan Perntz
New iptables package available,
Karl-Johan Perntz
smtpclient authentication,
Breno Tiberio
iptables compiling infinite loop,
Vlad Bistea
Broken flash? Uncompressing Linux... crc error... system halted,
Dave Whittaker
Cris compiler isn't ANSI compliant ?,
Vodafone
Debugng the flash watchdog problem,
Mikael Starvik
- Re: Debugng the flash watchdog problem,
Pieter Grimmerink
- Re: Debugng the flash watchdog problem,
Pieter Grimmerink
- <Possible follow-ups>
- RE: Debugng the flash watchdog problem,
Mikael Starvik
- RE: Debugng the flash watchdog problem,
Mikael Starvik
- RE: Debugng the flash watchdog problem,
Mikael Starvik
- RE: Debugng the flash watchdog problem,
Mikael Starvik
- Re: Debugng the flash watchdog problem,
Pieter Grimmerink
- RE: Debugng the flash watchdog problem,
Mikael Starvik
- Re: Debugng the flash watchdog problem,
Pieter Grimmerink
- RE: Debugng the flash watchdog problem,
Mikael Starvik
- RE: Debugng the flash watchdog problem,
Karl-Johan Perntz
MCM Crashes,
wretch
RE: Flash with 128K sectors,
michael.firth
Ser1 w/ DMA and USB2,
Udo Giacomozzi
[PATCH] 2.6.15 warnings with CONFIG_ETRAX_NO_LEDS,
Andy
Reboot at out of memory (CONFIG_OOM_REBOOT),
Udo Giacomozzi
NET-SNMP on Axis 83+ Device Server,
Patrick Gionet
Ethernet only works at 10baseTX-FD,
Dave Whittaker
can't mount USB mass storage device,
Pin Yang Ang
RTC and getting system time,
hinko.kocevar@cetrtapot.si
mounting USB storage device failed,
Pin Yang Ang
[SPAM] How to clone the firmware between boards,
Toy Lim
USB slave,
Simone Vellei
MCM footprint?,
Sam Silverstein
Re: Lua on Cris,
Robert Hibberdine
How to use watchdog in user application,
RIEM-VIS Ruud
Re: R: R: MCM Crashes,
wretch
CGI howto,
willie wortel
Problem with libmod-1.5,
antonio.fonseca
ACM modem immediately disconnected, I cannot use the device,
World Wide Web Server
ET100LX DMA problem, a chache problem?,
mark
ECPW + DMA on ET100LX,
mark
DRAM Size,
Brian
SDK 2.01 and different configurations,
Hannes Mayr
Test - Excuse me - Please ignore,
Vodafone
2.4.31 kernel config question,
Mark Mason
Scheduling in interrupt,
Udo Giacomozzi
Help! Program running in the background is eating up file system space,
Toy Lim
Socket Errors,
Dan Nelson
USB driver,
hinko.kocevar@cetrtapot.si
partition table checksum error,
Hannes Mayr
Encryptation,
Breno Tiberio
Heavy USB transfers darkens the sky,
Ronny L Nilsson
problems with /dev/ttyUSBx (2.6.15),
Matthias Rötzer
AW: Heavy USB transfers darkens the sky,
Matthias Rötzer
Reading /irq pin from userspace via gpio,
Ronny L Nilsson
AW: problems with /dev/ttyUSBx (2.6.15),
Matthias Rötzer
[OT] Flashing AXIS camera?,
Udo Giacomozzi
ASM preprocessor oddity (bug?),
Udo Giacomozzi
Bug in the serial driver kills performance,
Ronny L Nilsson
USB driver timers (2.6.15),
Andy
Flash detection problem,
Udo Giacomozzi
SDK, how do you use it!?,
Toni Röyhy
vftpd bug,
walter harms
dropbear key format,
RIEM-VIS Ruud
dropbear key formt (typos corrected),
RIEM-VIS Ruud
POSIX Mutexes for work inter-process?,
Vladimir Boroda
SDRAM errata,
Udo Giacomozzi
Extrax SDK reboot/halt,
michael.firth
Conflict ttyS1 - USB1,
Ermes Viani
flash update from /var/tmp,
RIEM-VIS Ruud
Memory leak or pppd issue or both?,
phil
MCM not responding,
hinko.kocevar@cetrtapot.si
USB CD/DV drive interface,
Farshad :: Farco
Switch IC from Micrel as Phy-chip with the Etrax 100LX MCM 4+16,
Markus Peter
port g direction,
Andrea Partinico
Compiling net-snmp on Axis 83+ Device Server,
Patrick Gionet
I would like to unsuscribe,
Francois-Xavier Bas
I need FOX Boards: “AXIS VAPIX AP I, HTTP - Interface Specification”,
Magnus Ivarsson
flash images too big?,
Toni Röyhy
[PATCH] for serial ports sending fake breaks,
Ronny L Nilsson
Mounting rootfs failed (2.6 Kernel),
Rick Luppino
RE: possible partition size issue,
Karl-Johan Perntz
Patch to make netkit telnetd become daemon,
michael.firth
Funny overruns in the network driver,
Ronny L Nilsson
RE: BOA .v. thttpd,
Peter Kjellerstedt
Alternatives to the browser / webserver interface.,
Robert Hibberdine
[PATCH] for removing serial driver latency,
Ronny L Nilsson
parport Linux 2.6,
Christoph Bacher
Large file issue > 2 Gb,
PBUCOLO@vodafone.it
Using Etrax without operating system?,
Markus.Bauernfeind
USB serial throughput,
phil
Disabling serial debug port in Linux 2.6,
Ricky Luppino
SIGNAL issue kernel 2.4.x,
PBUCOLO@vodafone.it
Error Compiling the Fox Image during SDK installation,
Ermes Viani
USB problem on K2.6.15,
Andrea Partinico
Cross-compiling GPSD,
Iván Sánchez Ortega
Making modules..,
Robert Hibberdine
RTS low when serial port is not opened for the first time?,
Rene
Connecting with an Microsoft SQL database,
Borja Rodríguez Diliz
Compiling customized kernel,
Rene
remap_pfn_range in 2.6 Kernel,
Ricky Luppino
Unbootable device,
ivrelk
Serial latency test and scheduling policies,
praude
Axis 83+ and phtreads,
Dr. Walfred Tedeschi
fpu code,
Andrea Partinico
Installing,
Dr. Walfred Tedeschi
How to link kernel module,
Hannes Mayr
ATA bus speed,
Giovanni Giovannozzi
Flashing,
Dr. Walfred Tedeschi
udp speed,
Dr. Walfred Tedeschi
Bug in Linux 2.4 and 2.6,
Karl-Johan Perntz
Installing a newer glibc,
Robert Hibberdine
Kernel 2.4 oops in usb serial driver,
ivrelk
AXIS ETRAX FS,
wretch
additional external SDRAM memory in 16 bit mode,
Matthias Rötzer
AW: additional external SDRAM memory in 16 bit mode,
Matthias Rötzer
Etrax FS - USB,
also
Etrax FS - PHYRST,
also
Dev. board 82 and IDE,
wretch
Porting Iperf traffic generator on FOX board,
seoli
Getting ttys1 going once and for all,
Daniel
Batch 0441,
wretch
AW: Batch 0441,
Matthias Rötzer
FS: SSI and slave,
also
RE: SSI and slave,
Mikael Starvik
Write to socket error...,
Eric Albers
ETRAX100LX board pinout graphic,
Eric Albers
Question on GPIO port G,
Eric Albers
Mathematical library for Etrax,
Emiliano Muńoz Vicente
Pin Order,
Dr. Walfred Tedeschi
Linux-2.6.15/ USBHID,
ICMdesign
network speed testing,
walter harms
Direct access to the images,
Gabriel Dominguez
cris-dist-1.63-v32.tar.gz and R2_01 (devboard) SDK?,
Ari Sinivaara
Adjustment of TMPFS and flash partition sizes,
tjue1
permanent changinng the net configuration,
Dr. Walfred Tedeschi
pa0 interrupt,
Christoph Bacher
How to forward packets from eth0 to eth1,
Eric Albers
Pinouts for the 82+ board!,
Eric Albers
syncser Master bidir mode on ETRAX,
Habib Bouaziz-Viallet
mini rcs ident for criss ?,
walter harms
Reading and writing to a register,
Walfred tedeschi
Registers,
Dr. Walfred Tedeschi
CPU ID,
hinko.kocevar@cetrtapot.si
- Re: CPU ID,
Ricard Wanderlof
- Message not available
- Message not available
- Message not available
- Re: CPU ID,
hinko.kocevar@cetrtapot.si
<Possible follow-ups>
RE: CPU ID,
Mikael Starvik
RE: Register,
Dr. Walfred Tedeschi
Just PAR0, not PAR1?,
=?iso-8859-15?Q?Michael_K=F6nig?=
Kernel Devellopment and Register,
Dr. Walfred Tedeschi
Maximum SDRAM on MCM4+16,
wretch
Kernel dev.,
Dr. Walfred Tedeschi
Kernel module compilation errors, but binary created.,
Dr. Walfred Tedeschi
Case report with flash utilities,
Dr. Walfred Tedeschi
where to buy the 100LX MCM 4+16,
Markus Peter
Problems compiling nbench,
Jochen Walter
Etrax FS - NAND,
also
Etrax FS NAND Bootstrap,
also
Etrax MCM 4+16 availability,
Arne Bockholdt
Boot problem with the devboard LX and SDK 2.01,
Philippe Frossard
External DMA and IRQ,
Dr. Walfred Tedeschi
[Sligltly OT] Limiting process ressources,
Udo Giacomozzi
Micrel 8721BT PHY,
michael.firth
USB to Eth question,
wretch
ssh keygen,
John
solution for working TTYS1 ??,
Daniel
Include usb PEN DRIVE into fimage,
Nicolas Oudard
Etrax FS <> LX,
also
GNU Pth/Threading help,
John Mackenzie
/dev/jpegX Invalid argument,
Maik Mory
Parallel port initialization,
Dr. Walfred Tedeschi
[no subject],
Maik Mory
cris strace,
Andy
usb bandwidth problem?,
Giuseppe Rota
Device drivers for lpt2 ...,
Philippe Frossard
net.eth1,
Andy
Signal or ITIMER_REAL problem,
Toni Röyhy
Parallel port on devboard_lx,
SZABO Tamas
Connectiong 8bit peripheral,
hinko.kocevar@cetrtapot.si
dma acquisition then direct to the net.,
Dr. Walfred Tedeschi
Supported USB-Ethernet devices,
cedric.stevens
USB hub chipsets,
=?iso-8859-15?Q?Michael_K=F6nig?=
PPP on ETRAX,
hinko.kocevar@cetrtapot.si
developer wiki down,
Mark Richards
dreq DMA operations,
Dr. Walfred Tedeschi
Problem with usb-host.c?,
=?iso-8859-15?Q?Michael_K=F6nig?=
How Can I set serial port baud rate to 50 baud,
Torsten Krieger
Memory advice needed (SDRAM & Flash),
=?iso-8859-15?Q?Michael_K=F6nig?=
93c46 EEPROM content,
wretch
Current Status on 4+16 and details for moving to using e100lx,
cacook
MII mode in SDK,
michael.firth
Running custom script at startup,
Ricky Luppino
network-usage limited,
Maik Mory
Increase flash from 4 to 8 Mb,
Göran Hillebrink
100LX + MCM4-16,
also
alsa - glibc problem ?!?,
John
RE: etrax boot on Fedora 5,
Karl-Johan Perntz
Wiki?,
Daniel Nyström
TX_ER, PHY and Mii mode,
John Mackenzie
Re: About ETRAX-100LX,
Hans-Peter Nilsson
foxboard / dma / epp question(s),
Kyle.Blay
More on par0->dma module,
Kyle.Blay
Re: [Fwd: Re: About ETRAX-100LX],
Hans-Peter Nilsson
EPP->DMA flow control problems?,
Kyle.Blay
Confirm csp0 access,
Daniel Nyström
PCF8563 once again,
Udo Giacomozzi
Etrax100LX and I2C linux subsystem,
Salvatore Benedetto
Etrax FS Development Environment?,
Vladimir Boroda
I2C sending multi-byte commands also Dallas 1-wire?,
Lee McLoughlin
Cannot Install SDK,
Dan Nelson
MCM 4+16 board not working on 10Mbit network,
wretch
Ethernet Problem with ETRAX LX,
Stefan Giacomozzi
USB1 and GPIO-Pins,
Stefan Giacomozzi
ptz-inspection-methods,
Maik Mory
Serial Problem,
Christoph Bacher
video4linux,
Salvatore Benedetto
linux kernel,
Salvatore Benedetto
Falsing MCM problem,
Andrew Andreev
Top level Makefile vs Make menuconfig,
Cedric Stevens
RE: [2.6 patch] include/asm-cris/: parisc: "extern inline" -> "static inline",
Mikael Starvik
dumb question,
Kyle.Blay
Boa BASIC_AUTH how can I enable ?,
Pierluigi Bucolo
foxboard and motion,
TruFF
Etrax FS Design,
also
Wiki,
Jason Melton
ETRAX FS Development Board,
Jason Melton
usb port,
Salvatore Benedetto
garbage collection logging,
Eric Perraud
PHYTER interfacing,
Habib Bouaziz-Viallet
New Discription for compiling LCD Device Driver?,
Wolf M. Asgard
Kernel BUG?,
Salvatore Benedetto
New kernel,
hinko.kocevar@cetrtapot.si
MMC 2.4 kernel module,
TruFF
Patch for e100boot, try all windows interfaces,
Ronny L Nilsson
R: Patch for e100boot, try all windows interfaces,
PBUCOLO@vodafone.it
Flashing the ETRAXv10 chip w ext FLASH,
hinko.kocevar@cetrtapot.si
MMC Memory,
TruFF
Season greetings,
Karl-Johan Perntz
Initial boot problem with fresh ETRAX 100LX,
=?UTF-8?Q?Michael_K=C3=B6nig?=
wrong checksum for os-linux-2.6-tag--devboard-R2_01.tar.gz,
richard -rw- weinberger
MMC problem,
TruFF
TCP Works But UDP Fails,
Dan Nelson
Dead Thread,
Dan Nelson
Threads And Processes,
Dan Nelson
busybox update,
Markus Peter
Flash is too small message using MCM 4+16 from new factory,
wretch
http autentization in boa server running on foxboard,
Jiri Pittner
Failing flashitall on new design,
wretch
Flashitall,
wretch
inconsistent operand constraints in an `asm',
Cedric Stevens
HELP: moving SDRAM chip selects,
wretch
System slowdown w/ kernel 2.4.31,
Jarkko Tuomi
Cross-compiling issues (autoconfigure settings),
Daniel Nyström
libtool problems,
Daniel Nyström
MCM 4+16 W10 not connected (floating),
Dr. Walfred Tedeschi
Port G Configuration,
Dan Nelson
Generating Images 16 bits and 32 bits,
Dr. Walfred Tedeschi
make menuconfig breaks with "missing separator",
Fahad Khowaja
Port G,
Dan Nelson
Increasing RAM on my FOX board by using a USB pen drive,
Salvatore Benedetto
Shared interrupt line,
hinko.kocevar@cetrtapot.si
Get IP from a Bonjour device,
Gerardo Rodríguez Visus
pmake/bmake problem compiling dash,
Arvid Brodin
zigbee support,
Vlad Bistea
ETRAX 100LX MCM available again?,
=?UTF-8?Q?Michael_K=C3=B6nig?=
how does test -z "$(var)" || $(mkdir_p) work!?,
Fahad Khowaja
sdk R2.01 Under gentoo,
Dr. Walfred Tedeschi
hcid can't open PIN file,
Fahad Khowaja
devboard-R2_10-RC2,
also
usb gprs modem: crisv10_irq warn: 3rd error for epid,
[MWV] Acquistapace Yuri
ETRAX FS - How do I use the JTAG TAP debugger?,
r.murphy2
GPS PPS signal for 'clock' on foxboard,
Kyle.Blay
VAPIX API, RTSP-Interface Specification,
cavit gül
Technical question about Axis-241QA videoserver,
BuFran
Real stupid question about system startup :),
Kyle.Blay
Webcam and driver recommendation for custom app development?,
Randy Graham
Flashing multiple devices,
hinko.kocevar@cetrtapot.si
iptables,
hinko.kocevar@cetrtapot.si
USB Modem,
Dan Nelson
Username/Passwords,
Chris Gurtler
Flash problem Fox board,
Per Fransson
Linking Errors,
Chris Gurtler
Uclibc and C++,
Chris Gurtler
Kernel Version,
Dan Nelson
Supported gcc version,
John Bindby
About new kernel...,
Fabrizio Guglielmino
R_WAITSTATES,
Dr. Walfred Tedeschi
Undefined references linking to libjpeg.,
Randy Graham
CP2102 Problem,
webmaster @ elnportal.it
TR: zd1211b driver,
BARREAU Pascal
Iptables 1.3.7, uClibc on cris,
hinko.kocevar@cetrtapot.si
Dump fimage?,
Anders Hilmersson
Image Access,
Johannes Caff
DMA data strange,
Dr. Walfred Tedeschi
<Possible follow-ups>
RE: DMA data strange,
Mikael Starvik
Migration from 4+16 MCM to 100 LX,
Arne Bockholdt
Data Strange II,
Dr. Walfred Tedeschi
[Fwd: Re: Data Strange II],
Dr. Walfred Tedeschi
New compiler tools release: cris-dist-1.64,
Hans-Peter Nilsson
CSP4 / 2.6 access issue,
Bryan Hackney
eth1: Tx time out.,
Fahad Khowaja
Oops tracing,
Daniel Nyström
tty/Serial Errors,
Siftar, Gabe
D-Link DWL-G122 Wifi USB,
Dan Nelson
Release of software distribution 2.10,
Karl-Johan Perntz
how to read directly bmp images,
Paolo Prete
RE: [CRIS] [PATCH] Fix implementation of atomic_inc/dec_return(),
Mikael Starvik
SDK 2.10/linux-2.6.19 notes,
Andy
e100boot on 64-bit arch,
hinko.kocevar@cetrtapot.si
SDK 2.10 Release problems,
Vladimir Boroda
SDK 2.10 and devboard 82,
Andy
SDK 2.10, missing fimage?,
Pauli Mikkonen
rtnet on ETRAX 100 LX,
Paolo Prete
usb-serial broken in SDK 2.10,
Andy
RE: [2.6 patch] arch/cris/arch-v32/kernel/fasttimer.c: remove kernel 2.0 code,
Mikael Starvik
SDK 2.10 problem,
Habib Bouaziz-Viallet
RE: Getting into network boot mode,
Jesper Bengtsson
Re: LX sync serial,
also
Quick question... automounting usb drives,
Kyle.Blay
ETRAX design won't boot,
Daniel Nyström
NAND flash configuration.,
Göran Hillebrink
Foxboard 8+32 and SDK2.01,
TruFF
U-Boot ported to EtraxFS,
Jachym Holecek
building optimized cris crosstools,
Pieter Grimmerink
etrax FS, framebuffer and mpeg,
Pieter Grimmerink
IP removed, problem during boot,
TruFF
raw asynch serial errors,
Kyle.Blay
Starting "flash" from shell script?,
=?UTF-8?Q?Michael_K=C3=B6nig?=
<Possible follow-ups>
RE: Starting "flash" from shell script?,
Karl-Johan Perntz
RE: Starting "flash" from shell script?,
Jesper Bengtsson
Voltage on GPIOs on startup?,
Robin Lorke
spca5XXLE output format,
TruFF
Adding extra serial ports,
John Mackenzie
devboard 88 flashing,
Pieter Grimmerink
DMA & debug port,
Andy
Re: devboard 88 flashing (fwd),
Ricard Wanderlof
/dev/ttyS1 wiring on original red Foxboard,
Kyle.Blay
etrax fs and bridging,
Pieter Grimmerink
New MCM4+16 Units,
Rick Luppino
AW: New MCM4+16 Units,
Matthias Rötzer
devboard 88 SD Card socket,
Pieter Grimmerink
devboard_88 USB, Bluetooth PAN, crisv32_hc crisv32_hc.0: Internalerror in HC, resetting.,
Ari Sinivaara
Reason of corrupted flash,
Christian Hoffmann [Niechoj electronic GmbH]
RE: dropbear SSH client can not connect to OpenSSH server,
Jesper Bengtsson
xon/xoff issue,
phil
Fiber optics connection on the eth0,
Dr. Walfred Tedeschi
Installation of new libraries to Axis build system,
Daniel Nyström
erasing flash,
Randy Scarborough
Compiler tools cris-dist-1.64 as Debian package?,
=?UTF-8?Q?Michael_K=C3=B6nig?=
RTC on foxgm problem,
TruFF
Debian packages for cris-dist-1.64,
Hans-Peter Nilsson
Cris compiler 1.64 on Gentoo?,
Göran Hillebrink
status of USB on EtraxFS,
Spectr
SDK 2.10 oddities,
=?UTF-8?Q?Michael_K=C3=B6nig?=
Fast Timers and RS-485,
Siftar, Gabe
Control button and ctrl_btn,
John Mackenzie
SDK R2.10: FTP and HTTP_POST upgrade fails?,
=?UTF-8?Q?Michael_K=C3=B6nig?=
gcc-4.1.2 & uclibc 0.9.28.2,
John Crispin
Problems with Axis 89 + SDK 2.10 + USB hard disks,
Borja Rodríguez Diliz
Problem with uncompressing files on new MCM4+16,
Ricky Luppino
SDK Error Using Ubuntu,
Dan Nelson
RE: compiling iptable,
Jesper Bengtsson
Problem flashing etraxfs 88 board,
Henrik Algestam
PPPD & fork() & exec() ...,
Mag. Herwig Huber
multiplexing serial driver for telit gsm module on fox board, CMUX protocol,
Mag. Herwig Huber
usb wifi problem,
TruFF
bad MCM,
hinko.kocevar@cetrtapot.si
- Message not available
- <Possible follow-ups>
- RE: bad MCM,
Jesper Bengtsson
EAGLE library for Etrax FS,
Chris Verges
kernel slab caused oom?,
hinko.kocevar@cetrtapot.si
Trouble with math.h,
John Mackenzie
WebDav,
Michael Maymann
e100boot sources,
hinko.kocevar@cetrtapot.si
Problem with named pipes in Linux 2.6.19 (SDK 2.10)?,
=?UTF-8?Q?Michael_K=C3=B6nig?=
small delay,
hinko.kocevar@cetrtapot.si
kernel module,
hinko.kocevar@cetrtapot.si
Wrong content type on MD5 files on server?,
michael.firth
run over the end of the erase block,
walter harms
CRAMFS: Possible problem with named pipes,
=?UTF-8?Q?Michael_K=C3=B6nig?=
multi threaded profiling,
Eric Perraud
Problems with USB GSM/GPRS modem,
hinko.kocevar@cetrtapot.si
asm-specifier for variable `__a' conflicts with asm clobber list,
Jochen Walter
RE: use of IP Config Utility,
Jesper Bengtsson
Wireless Modems,
Dan Nelson
FW: BOA + PHP,
Pierre Martignon
unsubscribe dev-etrax,
Collin Marc
inittab respawn not working as expected (?),
John Bindby
GUI backend for 100LX applications?,
Daniel Nyström
RE: input overruns on /dev/ttyS0 console port,
Jesper Bengtsson
Troubles with cris compiler,
Carlos Augusto Jimenez Millan
troubles installing CRIS compiler on Debian,
Carlos Augusto Jimenez Millan
Run Time Error,
Dan Nelson
serial port errors,
Alexey Luchko
eth0 Configuration,
Dan Nelson
unable to flash custom board,
Habib Bouaziz-Viallet
low-latency serial driver patch for devboard 2.10,
Martin Mörth
Another Wiki page,
Habib Bouaziz-Viallet
insmod Error,
Dan Nelson
<Possible follow-ups>
Re: insmod Error,
Antonio Galea
Package diagram for ETRAX FS,
Chris Verges
2.6.19 oops,
hinko.kocevar@cetrtapot.si
Devboard 88 mount of ext2 mmc fail,
Cedric @ OSS
cris-gdb: problems debugging the kernel,
Martin Mörth
boot flash problems,
Dr. Walfred Tedeschi
sleeping function called from invalid context,
hinko.kocevar@cetrtapot.si
Problem upgrading system to SDK 2.10,
Magnus Särnqvist
a name service just as sambas nmbd?,
mark
config kernel within the new SDK,
Habib Bouaziz-Viallet
Question about default IP adress,
Habib Bouaziz-Viallet
Advantages to switch newer Linux-kernel-2.6,
Habib Bouaziz-Viallet
USB Errors,
Dan Nelson
Cannot create directories in /mnt/flash,
Habib Bouaziz-Viallet
Problem with JFFS2 ?,
Habib Bouaziz-Viallet
Port B and USB,
John Mackenzie
[Problčme résolu],
Habib Bouaziz-Viallet
Parallel Port in MCM4+16 kernel 2.6 Sdk 2.01 & sdk 2.10 MCM4+16,
Dr. Walfred Tedeschi
Syncserial port question,
Habib Bouaziz-Viallet
RE: cris port lacks a merge?,
Mikael Starvik
ftstab: problems mounting mmc after cold start,
Mag. Herwig Huber
DMA on serial port /dev/ttyS2?,
Vladimir Boroda
RE: Function profiler for CRIS?,
Mikael Starvik
RE: Function profiler for CRIS?,
Mikael Starvik
RE: Function profiler for CRIS?,
Peter Kjellerstedt
VS1002 Interfacing succeedeed,
Habib Bouaziz-Viallet
Error while building kernel for Axis88 board,
Rahul D. Ghanate
sdk 2.10 on dev82,
hinko.kocevar@cetrtapot.si
Statistics about new MCM(22546 E2 NoPb),
Andrew Andreev
AW: Statistics about new MCM(22546 E2 NoPb),
Matthias Rötzer
Compiling ipsec-tools,
Cedric @ OSS
IP Tables issues on 2.10,
Phil Sutter
Access to camera operations,
Carlos Sánchez
memory of the ETRAX,
Nicola Brandonisio
GDBM package,
webmaster
[no subject],
Nicola Brandonisio
memory for the ETRAX 100LX,
Nicola Brandonisio
802.1q on the devboard,
Richard Nelson
Bus Interface basic questions.,
kordi kordi
problems with zd1211rw usb wlan adapter using 2.6.19,
Tero Laitinen
question about inittab,
Habib Bouaziz-Viallet
RE: error with R2_10 and MCM2+8,
Jesper Bengtsson
Etrax Board for sale.,
Tom Audenaert
R: Re: question about inittab,
PBUCOLO@vodafone.it
Updated Cris V32 Eth driver patch,
Jesper Bengtsson
/dev/fbx driver for EPSON S1D13505,
Habib Bouaziz-Viallet
configuration for 32MB of memory,
Bernd Schmitt
Updated 100LX USB driver,
Jesper Bengtsson
Installing shared library included as a plugin!,
Göran Hillebrink
Kernel upgrade via USB drive,
John Mackenzie
Config.in related to FrameBuffer,
Habib Bouaziz-Viallet
Apache fails to cross-compile,
Cedric @ OSS
Development on Etrax 100,
Jean-Marc Beaune
FS Device Drivers,
Gary Embler
TCP/IP performance of etrax100LX,
Bernd Schmitt
MPEG4 and MJPG stream generation,
Ricard Royo
I/O-Processor on Etrax FS...getting started,
Prantl Matthias
Meaning of "Error -3 while decompressing",
Habib Bouaziz-Viallet
compiling devboard-R2_10,
willie wortel
Slab leak?,
hinko.kocevar@cetrtapot.si
Serial comms receive delayed 2.4 kernel,
John Mackenzie
HTTPS, SSL with Foxboard,
willie wortel
Problem with setting DTR low on AXIS 223M Camera,
Mathiopoulos
ETRAX FS flow control, routing,
Göran Hillebrink
Programming Multiple ETRAX FS Boards,
r.murphy2
Programming Multiple ETRAX FS Boards (non-HTML sorry),
r.murphy2
vftpd problem with non root users,
Göran Hillebrink
libpthread don't copy to image,
PBUCOLO@vodafone.it
R: RE: libpthread don't copy to image,
PBUCOLO@vodafone.it
R: RE: RE: libpthread don't copy to image,
PBUCOLO@vodafone.it
IDE + kernel 2.6.15,
André van der Meer
2.6.19 USB problems (memory stick corruption),
Tero Laitinen
Etrax MCM4+16 layout,
Vit Mares
flash fail & speedgrades,
wretch
Ethernet flashing fail,
Tamas Szabo
problems with USB host controller,
Paul Osmialowski
Ethernet traffic stall / hang problem.,
Steve Terry
Fwd: etrax fs / linux 2.6.19: ethernet can't receive but still transmits,
Jason Holt
lazy relocation bug in 1.64?,
Joakim Tjernlund
ETRAX FS load from Windows,
Kenth Eriksson
cris-dist(gcc) PATCHES,
Joakim Tjernlund
Boot endless using USB and SDK 2.10,
PBUCOLO@vodafone.it
BOA added REMOTE_USER,
Pierluigi Bucolo
RE: [Patch 4/8] CRIS: Remove 'TOPDIR' from Makefiles,
Mikael Starvik
CRIS V32 serial driver patch,
Jesper Bengtsson
USB mount / umount,
Kate Stedman
Some questions about assembler on old Elinux (axis camera 2100).,
kas1e
flash sector erase error,
hinko.kocevar@cetrtapot.si
cris-dist melinux crosscompiler compilation questions,
kas1e
problems on cross compiling commoncpp 1.5.6,
Jan Wittorf
Problems on assembling ETRAX 100LX MCM 4+16,
Roberto Roberti
newer version of libstdc++,
Jan Wittorf
axis devBoard 82 flashit/flashitall no response,
stephan stadler
WG: axis devBoard 82 / fresh SDK v201 / USB errors on debug port,
stephan stadler
RE: axis devBoard 82 / fresh SDK v201 / USB errors on debug port,
Jesper Bengtsson
PHP compiling problem,
maurizio bertero
AW: axis devBoard 82 / fresh SDK v201 / USB errors on debug port,
stephan stadler
Fwd: Changing factory defaults,
maurizio bertero
GPIO and Preemptible Kernel Question,
Tristan Dargay
Alternate Ethernet (RJ-45) Jack/Connector,
Siftar, Gabe
remote debugging,
eperraud
RE: PoE Connectors [Was: Re: Alternate Ethernet (RJ-45) Jack/Connector],
Jesper Bengtsson
2.6.25-rc1,
hinko.kocevar@cetrtapot.si
Re: cris/arch-v10/lib/memset.c compile error,
Jesper Nilsson
[PATCH] CRIS: Import memset.c from newlib, fixes compile error with newer (pre4.3) gcc.,
Jesper Nilsson
Re: cris/arch-v10/lib/string.c compile error,
Jesper Nilsson
How to get MMC via SPI working on ETRAX FS and how to get USB working,
Martin Mikusek
Re: How to get MMC via SPI working on ETRAX FS and how to get USBworking,
Hans-Peter Nilsson
[PATCH] CRIS: Import string.c (memcpy) from newlib: fixes compile error with gcc 4,
Jesper Nilsson
Syntax error "(" unexpected,
Ramu
IDE HDD problem on ETRAX FS,
Martin Mikusek
Compiling Errors on Etrax 100LX V2,
Casey Annis
Re: [2.6 patch] cris: proper defconfig setup,
Jesper Nilsson
Re: [2.6 patch v2] cris: proper defconfig setup,
Jesper Nilsson
FTP Flash update doesn't work, or does it?,
Vladimir Boroda
Etrax FS and SPI,
Teddy
Iptables problem with SDK 2.10 and Etrax FS,
Göran Hillebrink
Re: [PATCH] arch/cris: Use mutex_unlock rather than spin_unlock,
Jesper Nilsson
Intel 3945 PC Express Wifi card,
Phil Sutter
Reboot on panic,
TruFF
IP Tables port forwarding issue in 2.6.19,
Phil Sutter
axis 82+/83+ cannot get factory setup back,
Chafik Driouichi
RE: strange code in crisv10.c,
Mikael Starvik
implicit declaration of poll(),grantpt() and unlockpt(),
willie wortel
Problem changing from 32MB to16MB SDRAM,
John Mackenzie
problem with 'make rootfs.img' in devboard-R2_10,
John D. Blair
pl2303 oops on 2.4.31,
TruFF
flashing the unit from the command line,
John D. Blair
Occasional lockups with kernel 2.6.19 and zd1211b USB wifi,
Juho Heikkinen
hang at boot,
hinko.kocevar@cetrtapot.si
creating another partition,
John D. Blair
Serial port overruns in 2.6.25-rc8,
hinko.kocevar@cetrtapot.si
libgcc_s.so.1 missing in arm toolchain?,
Ramu
RS422 and LSR,
John Mackenzie
arch/cris/arch-v32/drivers/nandflash.c problems and resolution,
Andrey Filippov
ACM device problem,
Tamas Szabo
Re: [PATCH][trivial][2/2] cris: add constfy to pgd_offset(),
Jesper Nilsson
Patch file for a newest linux kernel,
Claudio
flash too small,
Mark Richards
Question about 241Q GPIO Read/Write,
SunTomy
cflash3 and kernel flashing from USB,
John Mackenzie
GSM 07.10 driver can't link,
PBUCOLO@vodafone.it
Q:parport in 2.6.19,
walter harms
R: Re: GSM 07.10 driver can't link,
PBUCOLO@vodafone.it
R: GSM 07.10 driver can't link,
PBUCOLO@vodafone.it
usb on .25,
john
- Message not available
- Re: usb on .25,
Hinko Kocevar
- Message not available
- Message not available
- Message not available
- cris USB on 2.6.26,
=?UTF-8?B?SGlua28gS2/EjWV2YXI=?=
2.6.26-rc1 headers check,
=?UTF-8?B?SGlua28gS2/EjWV2YXI=?=
Compiler v1.62 + v1.64,
also
Temperature range for ETRAX 100LX,
Radioactivity-tlc
About Linux kernel 2.4 and SDK 2.10,
Philippe Frossard
GMP with ETRAX FS,
Phil Sutter
QEMU / ETRAX-FS,
Edgar E. Iglesias
Re: [PATCH] cris: remove unused global_flush_tlb,
Jesper Nilsson
10mbps speed on eth0,
Eric Fernandez
new uClibc,
Hinko Kočevar
Reboot when partitioning compact flash memory card,
Tero Laitinen
ETRAX 100 LX DMA FIFO BUFFER FUNCTIONALITIES,
Giulio Di Altobrando
ETRAX DMA SETUP,
Giulio Di Altobrando
[PATCH 2.6.26-rc5 0/2] cris: compile fixes for 2.6.26-rc5,
=?UTF-8?B?SGlua28gS2/EjWV2YXI=?=
2.6.25 kernel install_headers,
Hinko Kocevar
cris compiler,
Hinko Kocevar
- Re: cris compiler,
Hans-Peter Nilsson
- Re: cris compiler,
Hinko Kocevar
- Re: cris compiler,
Hans-Peter Nilsson
- Re: cris compiler,
Hinko Kocevar
- Re: cris compiler,
Hinko Kocevar
- CE certification for dev board,
Farshad at Farco
- RE: CE certification for dev board,
Oliver Kroth
- ETRAX FS PCI interface,
Moazzam Hossain
- RE: ETRAX FS PCI interface,
Jesper Bengtsson
- RE: ETRAX FS PCI interface,
Moazzam Hossain
- RE: ETRAX FS PCI interface,
Moazzam Hossain
- RE: ETRAX FS PCI interface,
Jesper Bengtsson
- RE: ETRAX FS PCI interface,
Moazzam Hossain
- RE: ETRAX FS PCI interface,
Jesper Bengtsson
- RE: CE certification for dev board,
Jesper Bengtsson
- RE: CE certification for dev board,
Farshad at Farco
- Re: CE certification for dev board,
Alexandre Poltorak
- Re: cris compiler,
Ricard Wanderlof
Re: [2.6 patch] asm/ptrace.h userspace headers cleanup,
Jesper Nilsson
I Can't write to many Registers.,
Giulio Di Altobrando
HOW can I Read DMA Buffer?,
Giulio Di Altobrando
How to create a fimage with custom serial number/MAC address,
maurizio bertero
usb wifi--> cannot associate with network(ESSID:off/any),
kanes su
memory allocation,
Bernd Schmitt
Corrupted Flash?,
Eric Fernandez
debugging kernel,
Hinko Kocevar
flash interface - Axis 89,
Frank Brown
clock_settime - Axis 89,
Frank Brown
Ide support broken in 2.6.25.*,
Claudio
Serial port and terminal block isolation ?,
Henrik Johansson
Unable to boot EUS100LX (Alice),
Tamas Szabo
LX100 assembler,
Hinko Kocevar
Man for RS485,
Frank Brown
file access,
Frank Brown
starting one app from another,
Frank Brown
problems with uclibc,
Frank Brown
Camera in device server,
Gustavo Oliveira
Re: utmpx.h in uClibc?,
Ricard Wanderlof
Re: Cris uses c++ instead of gcc,
Frank Brown
vftpd questions,
Ken Beals
app build problem with uClibc,
Ken Beals
problem with dos cmd line (Windows XP) ftp client,
Ken Beals
pl2303 problem on 2.6.15 and 2.6.19,
lists
Segmentation fault without core dump,
wretch
[uclibc] need some assembly validation for initfini.c/crti.S,
Stefan de Konink
rwsem.h,
sean kahil
Problems debugging core dump with gdb-cris,
Hannes Mayr
Auto detection of DRAM size for Etrax FS,
Göran Hillebrink
USB host driver for 2.6.26,
Hinko Kocevar
- RE: USB host driver for 2.6.26,
Jesper Bengtsson
- Re: USB host driver for 2.6.26,
Hinko Kocevar
- RE: USB host driver for 2.6.26,
Jesper Bengtsson
- Re: USB host driver for 2.6.26,
Hinko Kocevar
- RE: USB host driver for 2.6.26,
Jesper Bengtsson
- Re: USB host driver for 2.6.26,
Hinko Kocevar
- RE: USB host driver for 2.6.26,
Jesper Bengtsson
- Re: USB host driver for 2.6.26,
Hinko Kocevar
- RE: USB host driver for 2.6.26,
Jesper Bengtsson
- Re: USB host driver for 2.6.26,
Hinko Kocevar
- RE: USB host driver for 2.6.26,
Jesper Bengtsson
- Re: USB host driver for 2.6.26,
Hinko Kocevar
- Re: USB host driver for 2.6.26,
Hinko Kocevar
[no subject],
Jeremiah Pearce
CE declaration of conformity,
John Bindby
Try to post again...,
Long Han
ATA DMA Handshaking TIMING,
Giulio Di Altobrando
Handling of Interrupts,
Giulio Di Altobrando
mmc driver for sdk 2.10,
lists
Ethernet driver in 2.6.26 and newer,
Hinko Kocevar
- Re: Ethernet driver in 2.6.26 and newer,
Jesper Nilsson
- RE: Ethernet driver in 2.6.26 and newer,
Jesper Bengtsson
- Re: Ethernet driver in 2.6.26 and newer,
Hinko Kocevar
- Re: Ethernet driver in 2.6.26 and newer,
Hinko Kocevar
- Re: Ethernet driver in 2.6.26 and newer,
Jesper Nilsson
- Re: Ethernet driver in 2.6.26 and newer,
Hinko Kocevar
- Re: Ethernet driver in 2.6.26 and newer,
Hinko Kocevar
- Re: Ethernet driver in 2.6.26 and newer,
Hinko Kocevar
- Re: Ethernet driver in 2.6.26 and newer,
Jesper Nilsson
- Re: Ethernet driver in 2.6.26 and newer,
Hinko Kocevar
- Re: Ethernet driver in 2.6.26 and newer,
Jesper Nilsson
- Re: Ethernet driver in 2.6.26 and newer,
Hinko Kocevar
- RE: Ethernet driver in 2.6.26 and newer,
Jesper Bengtsson
- Re: Ethernet driver in 2.6.26 and newer,
Hinko Kocevar
- Re: Ethernet driver in 2.6.26 and newer,
Jesper Nilsson
- Re: Ethernet driver in 2.6.26 and newer,
Hinko Kocevar
- Re: Ethernet driver in 2.6.26 and newer,
Jesper Nilsson
- Re: Ethernet driver in 2.6.26 and newer,
Hinko Kocevar
- Re: Ethernet driver in 2.6.26 and newer,
Jesper Nilsson
- Re: Ethernet driver in 2.6.26 and newer,
Hinko Kocevar
- Re: Ethernet driver in 2.6.26 and newer,
Hinko Kocevar
- Re: Ethernet driver in 2.6.26 and newer,
Hinko Kocevar
- Re: Ethernet driver in 2.6.26 and newer,
Hinko Kocevar
- Re: Ethernet driver in 2.6.26 and newer,
Hinko Kocevar
- <Possible follow-ups>
- Re: Ethernet driver in 2.6.26 and newer,
=?utf-8?Q?Hinko_Ko=C4=8Devar?=
fimage with custom file/directory in /lib,
maurizio bertero
Cash for help,
sean kahil
Release of software distribution 2.20 RC1,
Jesper Bengtsson
Re: Race in cpu bringup?,
Jesper Nilsson
Release of software distribution 2.20 RC2,
Jesper Bengtsson
Cross compile for axis214ptz,
Rodolfo Giometti
I am looking for a schematics from AXISFS 88 devboard,
Istvan Czobel
RE: Changing the HZ value in 2.20 RC2,
Jesper Bengtsson
Release 2_20-RC2,
Chris
Problems using gcc-4.3 when installing cris-dist-1.64,
Hans-Peter Nilsson
cris on 2.6.28 - WARNING: at lib/klist.c:62 klist_node_init+0x46/0x54(),
Hinko Kocevar
Problem with USB Mass Storage device with embedded hub,
Arne Bockholdt
2-20RC2 IDE drivers,
Spectr
SDK 2.20 init scripts fail on devboard 88/89,
Stefan Reinauer
RE: rtc support in cris,
Mikael Starvik
Problem with a multithreaded application,
David López González
Using strptime on Etrax FS,
goran.hillebrink
207MW ARTPEC-A Firmware source?,
Bill Eldridge
[PATCH] Remove unused variable from Cris driver,
Claudio Scordino
[PATCH] Remove duplicate code for RS485 communications,
Claudio Scordino
File upload using vsftpd,
John Mackenzie
PHP on devboard: Apache or boa?,
Borja Rodríguez Diliz
Broken headers_install in 2.6.28,
Hinko Kocevar
Is flashing the kernel requiered on Etrax 100LX ?,
OB
Some start-up questions FOX board,
Joachim Osbeck
SPI with asm_sync_serial.h,
Martin Wollatz-Vogt
RS485 testing on Etrax 100 LX,
Claudio Scordino
SYNC_SERIAL -> could not allocate IO group for port 0/1,
Martin Wollatz-Vogt
zd1211rw and wpa_supplicant,
Filip Martinovsky
Discontinutation of ETRAX Chips,
Siftar, Gabe
AW: Discontinutation of ETRAX Chips,
Matthias Roetzer
New long-term strategic direction,
Jesper Bengtsson
Release of software distribution 2.20,
Jesper Bengtsson
[RFC PATCH] crisv10.c: fix buffer count and jiffies wrap-around,
Gerard Kam
[RFC PATCH] fasttimer.c [0/2] : improve accuracy and fix self-test,
Gerard Kam
Problem when installing AXIS Sw Distribution 2.20,
Andrei Korostelev
Problem installing AXIS SW Distribution 2.20,
Andrei Korostelev
Tristating Address Bus,
John Mackenzie
[PATCH] Cleanup patch for RS485 on Cris architecture,
Claudio Scordino
SDK 2.20 USB hcd strange code,
Spectr
Intel/Numonyx PC28F256P30B85,
John Mackenzie
devlopment/test environment,
ed
libfakeroot.so cannot be preloaded,
Siddharth Gupta
Can't make fimage,
PBUCOLO PBUCOLO
USB at FS processor,
Spectr
IDE as module,
Alexandre Poltorak
Re: [PATCH 15/25] [cris] BUG to BUG_ON changes,
Jesper Nilsson
Re: [PULL] cpumask updates for cris,
Jesper Nilsson
Backup of the firmware,
Filippo Elici
syncser0 as slave-input working on the foxboard ? / or ide with syncser1,
Martin Wollatz-Vogt
[PATCH] Fix broken compilation of Cris serial driver,
Claudio Scordino
Etrax 100LX availability,
Mahmut Fettahlioglu
Ethtool & non auto-negotiation router,
wretch
SPI sync_serial,
Martin Wollatz-Vogt
Axis questions,
Frank Brown
Etrax 100LX dual boot,
John Mackenzie
Axis Device Servers and Dev Board Replacements,
Phil Sutter
SYNC_SER1 and USB,
mwollatz-vogt
Lirc "serial driver",
M Werner
Normal installation method: Problem(s) under Fedora 11,
Pascal Aygalinc
devboard lx network boot,
Andreas Roth
Compiling Samba 3.x,
Siftar, Gabe
eraseflash fails,
John Mackenzie
Re: [PATCH] cris: Cleanup linker script using new linker scriptmacros.,
Jesper Nilsson
QEMU how-to,
cedric.stevens
Persistent static routes,
=?ISO-8859-15?Q?G=F6ran_Hillebrink?=
Problems with sleep system call,
Walter, Jochen
SDK 2.20 and Busybox,
=?ISO-8859-15?Q?G=F6ran_Hillebrink?=
Sending hex data using nc command,
Jeremiah Pearce
RTC spec,
John Bindby
Boa for SDK 2.10 -> SDK 2.20,
=?ISO-8859-15?Q?G=F6ran_Hillebrink?=
gcc-cris: internal error,
walter harms
usleep longer with SDK 2.20,
=?ISO-8859-15?Q?G=F6ran_Hillebrink?=
parhandclient parameter handler,
Emiliano Muńoz Vicente
foxboard 4/16 devboard-R2_20,
Konrad Mann
VLAN over ETRAX FS, mtu undersize problem?,
Joakim Tjernlund
- Re: VLAN over ETRAX FS, mtu undersize problem?,
Joakim Tjernlund
- RE: VLAN over ETRAX FS, mtu undersize problem?,
Mikael Starvik
- RE: VLAN over ETRAX FS, mtu undersize problem?,
Joakim Tjernlund
- Re: VLAN over ETRAX FS, mtu undersize problem?,
Jesper Nilsson
- Re: VLAN over ETRAX FS, mtu undersize problem?,
Jesper Nilsson
- Re: VLAN over ETRAX FS, mtu undersize problem?,
Joakim Tjernlund
- Re: VLAN over ETRAX FS, mtu undersize problem?,
Jesper Nilsson
[PATCH] CRIS RS485: Check SER_RS485_RTS_BEFORE_SEND before delaying.,
Claudio Scordino
flat file mailing list,
Andreas Hagele
build break in Software distribution 2.20,
Andreas Hagele
axis flashing not working,
Andreas Hagele
Re: OpenCV in axis,
umut cinar
backtrace and ETRAX FS,
=?ISO-8859-15?Q?G=F6ran_Hillebrink?=
cris and glibc,
Joakim Tjernlund
backtrace,
Joakim Tjernlund
Invitation to connect on LinkedIn,
=?UTF-8?Q?Umut_=C3=87inar?=
Developer board LX / R2_20,
SZABO Tamas
New Axis 89 devices available,
Phil Sutter
Sync Serial and SPI,
Radioactivity srl - Roberto Roberti
"bignum invalid" error,
Radioactivity srl - Roberto Roberti
change runlevel at boot,
Pierluigi Bucolo
Mail converted by MHonArc 2.5.2