[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

how to cross compile utilities under mtd/util



Hi, all,

I downloaded mtd-snapshot-0830.tar.bz, and I have finished "make zImage, make module, make modules-install" such things, however, when I try to cross compile the utilities under mtd/util, I failed although I did cross compile according to the README file under mtd/util, however the really bad thing was: I followed automake and configure steps described by README, then some of NATIVE environment variables seem to be set wrong , the phenomena is I can not "ls" some directories which include "libc.so.6", the error message is "...can not load shared library libc.so.6...", who can help me to fix this issue and give instructions on how to cross-compile utilities under/mtd/util for assabet board?

I tried to just use "make" to cross compile these utilities by changing "gcc" to "arm-linux-gcc", however, error is encountered at link stage because "libc.so" can not be found under cross-compile environment.  Hope some one would help me!

Thanks in advance 
Susan


-----Original Message-----
From: somshekar kadam [mailto:kadamsom@xxxxxxx.in]
Sent: Tuesday, September 04, 2001 6:59 PM
To: jffs-dev@xxxxxxx.com
Subject: 


hi,
  i am not getting the concept of copying flash image
to
   /dev/mtdx 
   and  while mounting mount -t /dev/mtdblockx -o /mnt
device is changed how will my files on mtd0 will be
there
when i mount on /dev/mtdblock0 and mount point /mnt

can any just give a hint

thanks a lot in advance
regards
som




____________________________________________________________
Do You Yahoo!?
Send a newsletter, share photos & files, conduct polls, organize chat events. Visit http://in/ groups.yahoo.com

To unsubscribe from this list: send the line "unsubscribe jffs-dev" in
the body of a message to majordomo@xxxxxxx.com


To unsubscribe from this list: send the line "unsubscribe jffs-dev" in
the body of a message to majordomo@xxxxxxx.com