[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: JFFS2 MTD NAND with two banks
On Wed, 2003-10-01 at 07:43 +0200, email@example.com wrote:
> Hi list,
> Jffs2 is usable now on our small platform with a 68vz328 (Thanks David for the
> kind support).
> A 32MB Flash chip is mounted within 37 seconds.
> Now I would like to add the smart media slot on our board. After reading the
> nand tech document, I still do not understand how to access the smart media
> chip. We use two chips (NAND flash and Smart Media Card) to share the ALE
> and CLE lines. So how must I adapt the your_hwcontrol mechanism or do I need
> to write a second independing driver (how could I handle concurrent access in
> that case).
If you provide your own select_chip() function for each chip, then it
can do mutual exclusion and allow only one to be accessed at a time.
To unsubscribe from this list: send the line "unsubscribe jffs-dev" in
the body of a message to firstname.lastname@example.org